Brian Posted June 24, 2010 Posted June 24, 2010 Joker 2 already... Well, I'm feeling a little screwed. I had just about gotten over my buyers remorse, but this just takes the cake. I feel like I got the unfinished version. So this version is adjustable voltage from 3.7 - 6v using the same batteries as the first joker. Doesn't this mean that the first joker is really a 6v unit? Seems like I asked that before and got some confusing answer from Jesso. Anyhow, I think I'll go order a Buzz. Sorry to vent. Phaseman66 1
snubber Posted June 24, 2010 Posted June 24, 2010 So all you folks that just had to have that Joker when it first came out....are you feeling a little soreness around the area where the preparation H should go??? Sounds like a gotcha to me.....sorry luck and Phaseman66 1 1
actor92191 Posted June 24, 2010 Posted June 24, 2010 you know... something held me back from getting the Joker, maybe it was because I already had a device that took the exact same batteries, minus the LED and "protection unit" (which is unnecessary because Tenergy batteries have a really good protection in them). All of a sudden this "variable voltage" concept comes out and everyone drops everything! I see buying PV's a lot like buying any other technology: wait a few more months until something better comes out or until the price drops for what you want! luck 1
kitsune Posted June 24, 2010 Posted June 24, 2010 With the vaping world growing by leaps and bounds, there is always upgrades and something new and improved..... In the last year I have seen many come and go--I'm usually the one that buys just before the upgrade...Much like computers and cell phones.
Buzzkill Posted June 24, 2010 Posted June 24, 2010 The market is changing, expect to see even more changes SOON ! BTW we have already applied for a Provisional Patent Application for the variable voltage on a PV ! luck 1
Phaseman66 Posted June 24, 2010 Posted June 24, 2010 I think I'll go order a Buzz. That makes two of us. I really do like my Joker, but the price was plain hurtful and reliability seems to be an issue. (mine is currently in the shop under warranty for non-functioning LED.) I got caught up in the hype once. I don't regret it, the Joker is a good unit. The Joker part deux? Thanks, but no thanks Vaprlife. Christopher and luck 2
VAPRLIFE Posted June 24, 2010 Posted June 24, 2010 Our sincerest apologies to everyone ...... We wanted all *Joker* owners to know that we inadvertently left out a key piece of information in our original post regarding *The Joker 2*... We would ask that you please take time to read our most recent post, which contains additional information that should have been included with the first post. Thank you for your understanding........ VaprLife Team
Christopher Posted June 24, 2010 Posted June 24, 2010 Joker owners (with an RMA) can upgrade to the newest version. Now THAT'S customer service.
Buzzkill Posted June 24, 2010 Posted June 24, 2010 Our sincerest apologies to everyone ...... We wanted all *Joker* owners to know that we inadvertently left out a key piece of information in our original post regarding *The Joker 2*... We would ask that you please take time to read our most recent post, which contains additional information that should have been included with the first post. Thank you for your understanding........ VaprLife Team BTW we have already applied for a Provisional Patent Application for the variable voltage on a PV ! we should talk ??
Christopher Posted June 24, 2010 Posted June 24, 2010 Did you apply for the patent AFTER you released the device? Was the application processed and approved before images and the device itself was released? If not, then it's public domain. You might also wish to contact vaprlife directly rather than in an open forum.
Buzzkill Posted June 24, 2010 Posted June 24, 2010 No , and that does not preclude applying for a patent under US law I did contact them If you feel that the post is inappropriate please delete it I just find it funny that their signature reads QUOTE " Imitation..... is the sincerest form of flattery "
Stirfry Posted June 24, 2010 Posted June 24, 2010 (edited) well, technically, everyone creating any kind of e-cig in imitating... regardless if what that add to it, or have improved upon. In all fairness EVERYONE has been saying for the past month - and giving YOU the credit - that variable voltage is the new standard. you should be proud of that. But when everyone is saying "i can't see myself getting a mod that is NOT variable voltage", then other manufacturers have to respond. in order to compete you have to be playing the same game, right? VaprLife set the previous standard when a lot of others were offering outdated screwdrivers, exploding mods, and faulty switches. They have outstanding customer service, and when **** goes wrong they take care of it. choice is good! and so is competition. that's what leads to innovation, as you should well know. that being said, i will be getting a Buzz (hurry up with those 510 fittings!) Edited June 24, 2010 by Stirfry
ddavelarsen Posted June 24, 2010 Posted June 24, 2010 My brother's Buzz is a really nice unit. Very good looking and well made. But it sure needs a way to adjust the voltage without the meter! Even knowing how many turns equals how many volts would be something to go on. I say this because he switches between cartos and 801s - 510 carto for the commute, 801 for daily vape. But they do need the voltage adjusted for optimum menthol vaping.
Brian Posted June 24, 2010 Author Posted June 24, 2010 Our sincerest apologies to everyone ...... We wanted all *Joker* owners to know that we inadvertently left out a key piece of information in our original post regarding *The Joker 2*... We would ask that you please take time to read our most recent post, which contains additional information that should have been included with the first post. Thank you for your understanding........ VaprLife Team Wow! You really came through on this one - Thanks!!! Great news.
DAYVAPE Posted June 24, 2010 Posted June 24, 2010 No , and that does not preclude applying for a patent under US law I did contact them If you feel that the post is inappropriate please delete it I just find it funny that their signature reads QUOTE " Imitation..... is the sincerest form of flattery " You've got my total support Buzz! And I love my unit!!! luck 1
Buzzkill Posted June 24, 2010 Posted June 24, 2010 My brother's Buzz is a really nice unit. Very good looking and well made. But it sure needs a way to adjust the voltage without the meter! Even knowing how many turns equals how many volts would be something to go on. I say this because he switches between cartos and 801s - 510 carto for the commute, 801 for daily vape. But they do need the voltage adjusted for optimum menthol vaping. Dave on our web site there is a downloadable CHART that shows Turns VS Voltage http://www.notcigs.c...uemart&Itemid=1 Also you can at times use the LED to get an idea , the BLUE led will get brighter with higher voltages. Other than that you need a volt meter to set the start point.
noXious Posted June 24, 2010 Posted June 24, 2010 Hockey? Sorry, word chain came to mind and I'm always down for a good brawl Please don't hate my "feisty" spirit!
ddavelarsen Posted June 24, 2010 Posted June 24, 2010 Dave on our web site there is a downloadable CHART that shows Turns VS Voltage http://www.notcigs.c...uemart&Itemid=1 Also you can at times use the LED to get an idea , the BLUE led will get brighter with higher voltages. Other than that you need a volt meter to set the start point. Thank you!
DasBeanz Posted July 2, 2010 Posted July 2, 2010 I still would like to see an American company make a beautiful PV device. I have the GG slim with the 7v extention and the thing is a work of art. Even the eGo looks good. The American PV's look like pegs of a BMX bike turned into a PV. The best looking American made PV that I have seen is the VP1. Even thoe I don't use it much, I won't give it away. I do break it out from time to time, but that's about it. And for the varible voltage topic, I was thinking of useing a microcontroller to switch from 3v to 5v. The controller can be programed to be 3v but if you push the button 3 times fast then it goes to 5v and the led changes color. Parallax makes a chip called BS1. It's small and not expencive and there might be even smaller ones out there.....Just my 2 cents.(I might need to get some change back also.lol)
Buzzkill Posted July 3, 2010 Posted July 3, 2010 I still would like to see an American company make a beautiful PV device. I have the GG slim with the 7v extention and the thing is a work of art. Even the eGo looks good. The American PV's look like pegs of a BMX bike turned into a PV. The best looking American made PV that I have seen is the VP1. Even thoe I don't use it much, I won't give it away. I do break it out from time to time, but that's about it. And for the varible voltage topic, I was thinking of useing a microcontroller to switch from 3v to 5v. The controller can be programed to be 3v but if you push the button 3 times fast then it goes to 5v and the led changes color. Parallax makes a chip called BS1. It's small and not expencive and there might be even smaller ones out there.....Just my 2 cents.(I might need to get some change back also.lol) Das why not just use a switch ?? and can the Processor. Just saying Ok you can have $.01 back now
DasBeanz Posted July 4, 2010 Posted July 4, 2010 Das why not just use a switch ?? and can the Processor. Just saying Ok you can have $.01 back now TY for the change. The processor can monitor the voltage and protect aginst shorts in the system. It also can automaticly switch from 6v to 3.7 by paraleling the 2 battries to make the unit last longer at a lower voltage and letting the Vapist know that there battires are getting low and will be needing to change them soon. Using the processor you can use a touch switch instead of a push button this would eliminate the acidental fireing of the unit in someone's pocket unless they get wet. Also make charging contacts on the bottom of the unit so it can be droped into a charger at the end of the day giving the user the choice of switching the battries or charging them inside the unit. using diodes you can protect from getting a shock from the charging contacts. Keeping a charger on your desk it can hold and charge to unit at the smae time.
DasBeanz Posted July 4, 2010 Posted July 4, 2010 Vapist sounds dirty. lol. LOL. Ya, maybe I shouldn't use that term. It could open up some doors for people to make some wise cracks. Good thing I tested it out here first. Ty for pointing that out. lol.
Buzzkill Posted July 4, 2010 Posted July 4, 2010 TY for the change. The processor can monitor the voltage and protect aginst shorts in the system. It also can automaticly switch from 6v to 3.7 by paraleling the 2 battries to make the unit last longer at a lower voltage and letting the Vapist know that there battires are getting low and will be needing to change them soon. Using the processor you can use a touch switch instead of a push button this would eliminate the acidental fireing of the unit in someone's pocket unless they get wet. Also make charging contacts on the bottom of the unit so it can be droped into a charger at the end of the day giving the user the choice of switching the battries or charging them inside the unit. using diodes you can protect from getting a shock from the charging contacts. Keeping a charger on your desk it can hold and charge to unit at the smae time. I also like the idea of a processor BUT the reliability is the question , the more parts / functions the more likely it is to fail IMO good idea , I know that Cisco is working on a Processor based PV soon as well.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now