igetcha Posted May 14, 2009 Share Posted May 14, 2009 hi all, i love my TITAN (Joye510) when using it with a manual battery and i also love my PCC so i can always have a fully charged battery! however, the PCC wont charge my manual battery as the button on the battery gets pressed and activates the LED when you put it in, plus its a struggle to close the lid as the manual batteries are about 4mm longer than the automatic ones! i then read a quote from Janty who said in a statement:- "They do fit, you just need to push the switch and then shove them inside, no problem, the batts will charge, there is no risk, just do it carefully." i thought that there had to be a better solution than that so i made this vid...........its very easy to do and now charges my manual battery without any probs! hope it helps someone, cheers, scott Link to comment Share on other sites More sharing options...
FloridaKracker Posted May 14, 2009 Share Posted May 14, 2009 Great tip man I've been looking into getting one of those and now I know what to expect so I wouldn't get angry when it didn't fit since both my battery's are manual. Link to comment Share on other sites More sharing options...
Madness Posted May 14, 2009 Share Posted May 14, 2009 Hey now, That is great! I have a PCC on the way, so this will be a must do... Thank you! Link to comment Share on other sites More sharing options...
igetcha Posted May 15, 2009 Author Share Posted May 15, 2009 cheers guys, you might be lucky though as "some" PCC units/manual batteries do actually fit fine.................but the vast majority dont! Janty say that their manual batteries are compatible with the PCC, but then they said "just shove them in!" lol Link to comment Share on other sites More sharing options...
FloridaKracker Posted May 15, 2009 Share Posted May 15, 2009 Ya the site I bought my 510 says they will fit but my battery's have a red led so I don't know if they are different in size probably not but the case mod looks easy enough to do with dremel. Link to comment Share on other sites More sharing options...
Madness Posted May 15, 2009 Share Posted May 15, 2009 I was told the newer shorter style manual batt's will fit, (we will see) I have the new batt's ready to try out as well an the longer manual style... Nice to know how it can be done if things do not fit.. Hell, it will take longer to clamp it in my Mill, than it will take to mill a slot in it LOL.. Great tip, Thank You!!! Link to comment Share on other sites More sharing options...
PoppaC Posted May 15, 2009 Share Posted May 15, 2009 "> Link to comment Share on other sites More sharing options...
igetcha Posted May 15, 2009 Author Share Posted May 15, 2009 cheers guys! Link to comment Share on other sites More sharing options...
Madness Posted May 16, 2009 Share Posted May 16, 2009 PCC Update... Well my new PCC came in today, (Again, Just have to love the Widow) seems they have already slotted the Batt compartment, the Manual Batts slide in easy with the provided slot... Looking down inside the PCC, the new slotted area is at 7:00 and is 0.225" wide, all the way down to the connector at the bottom. In regards to the longer style Batt's, they do fit, but very tight, the top will be a bit tweaked as you close it, but it does work. The size of the PCC is smaller than I expected 1.730" wide X 1.225" Tall X 0.740" Thick.. Will report how well it works and lasts after extended use... Link to comment Share on other sites More sharing options...
mustk1ll20 Posted June 13, 2009 Share Posted June 13, 2009 thats awesome. i posted a link at the other forum i post at as some one has a blucigs kit and it seems the batteries and atomizers are interchangeable with the 510. he was looking to mod the pcc from the blu cig kit to work with the 510 manual battery. Link to comment Share on other sites More sharing options...
Recommended Posts