Jump to content

801 Compatibilities?


Dajamster

Recommended Posts

If size is not a consideration, you might want to consider some of the mods for extended battery life. Just my .02. I've been using a VP2 with 801s, with great satisfaction. Good luck and keep us posted!

Link to comment
Share on other sites

If size is not a consideration, you might want to consider some of the mods for extended battery life. Just my .02. I've been using a VP2 with 801s, with great satisfaction. Good luck and keep us posted!

Tis a thought... Who has them? Now that I've had a 5 hr nap, I think it might have been a 30-something that was compatible with a 510... Always did have a crummy memory for numbers. Haven't memorized a single telephone number since I got my first cell phone that stored numbers. Before that, I kept an address book.

In the meantime, I have sent Arno an email and hope to hear from him or his family soon. At least the unit I have is still working & recharging just fine. Just being paranoid every time I have to set it down at an angle.

Thanks All for the Info!

P.S. Just had a thought: has anyone ever posted a list of compatibilities? Say this model from X will fit these from Y,Z, etc.? If not, is there some knowledgeable helpful, and somewhat obsessive/compulsive person out there who will take up the challenge? *G*

Edited by Dajamster
Link to comment
Share on other sites

I'm not sure if your willing to go with another supplier, but Rob at Vaporkings has 801 manual buttons batteries there. I've ordered quite a lot from him and he's helped out a lot, you can always find some coupon codes from him in the supporting suppliers section.

http://www.vaporkings.com/DSE801_Batteries_and_Atomizers_s/47.htm

Link to comment
Share on other sites

Just in terms of battery mods, there are tons of them - enough to drive you batty trying to pick one. Here are a couple I have off the top of my head, but believe me, there's just a boat load of em.

3.7V

VP2 setup for 510

Protege

GG Slim

Screwdriver

5V+

Chuck

Silver Bullet

There are many, many more but I just got tired of seeing so much stuff I wanted. There are always adaptors for your preferred atty too, so don't let that put you off anything.

If I may make yet another suggestion, I've just had my first 5V experience and I don't think I'll ever be fully satisfied with anything less again. 3.7V will still work and that's what I have for walking around, but I'm now on a mission: 5V+ mod. That's just all there is to it. :D But my wife says it's her turn for some new stuff, so that's on hold for a while now. Sigh.

Link to comment
Share on other sites

If I may make yet another suggestion, I've just had my first 5V experience and I don't think I'll ever be fully satisfied with anything less again. 3.7V will still work and that's what I have for walking around, but I'm now on a mission: 5V+ mod. That's just all there is to it. :D But my wife says it's her turn for some new stuff, so that's on hold for a while now. Sigh.

So you got your VP/PT finally!

Link to comment
Share on other sites

I placed an order with Wordup today. They had everything I wanted in stock. And I wanted to try some of their liquids anyway. Will still be sending Arno some business in the future. He & his family have done right by me thus far. I can tell it's a small business, so having stuff in stock all the time can be difficult. Next time I order, it won't be as time sensitive.

I'm saving up to hatch the 'evil plot' of converting all my passengers to vape. I work night shift. Lots of bar runs and people who want to smoke. Since they passed the law to ban smoking in public places, smoking in a taxi is technically illegal. (though no local cop is likely to pull a cab over for people smoking in it, they like us too much) Thinking of getting some 'loaner units' with extra mouthpieces that I can switch out, take them home, sterilize them & use them the next night. Will probably go with the Joye510s for that project.

Link to comment
Share on other sites

I'm saving up to hatch the 'evil plot' of converting all my passengers to vape. I work night shift. Lots of bar runs and people who want to smoke. Since they passed the law to ban smoking in public places, smoking in a taxi is technically illegal. (though no local cop is likely to pull a cab over for people smoking in it, they like us too much) Thinking of getting some 'loaner units' with extra mouthpieces that I can switch out, take them home, sterilize them & use them the next night. Will probably go with the Joye510s for that project.

That's a fantastic project Dajamster! thumbsup.gif You might also think how you can give them something to take with them, like a business card sized card with a couple helpful links on it - vaportalk.com for example. ;) I made a CD with a bunch of info on it but it's kind of overwhelming - I think a simple message and link would be more effective. Go man!

Link to comment
Share on other sites

That's a fantastic project Dajamster! thumbsup.gif You might also think how you can give them something to take with them, like a business card sized card with a couple helpful links on it - vaportalk.com for example. ;) I made a CD with a bunch of info on it but it's kind of overwhelming - I think a simple message and link would be more effective. Go man!

Yeah, I read on another post that the VT guys send cards w/ the website addy on them when ya order from their store. So, yet another excuse to try out their selection... *EG*

Link to comment
Share on other sites

  • 2 weeks later...

Arno must be sold out for now I bought one a couple of weeks ago.Vapor Kings has them the manual 801 batteries.

Just recieved 3 801 atty's from another place because of price and 2 didn't work.

I thought I read somewhere here at VT that the 302 is the same as the 801.

Is this true? What's the diff?

Link to comment
Share on other sites

Just recieved 3 801 atty's from another place because of price and 2 didn't work.

I thought I read somewhere here at VT that the 302 is the same as the 801.

Is this true? What's the diff?

Yes the Joye 302 and the DSE 801 ( different manufacturers) have the same threads, therefore they are interchangeable. I prefer the 302 atty because the atomizer bridge is wider and I think it produces better vapor.

Edited by jeffb
Link to comment
Share on other sites

Yes the Joye 302 and the DSE 801 ( different manufacturers) have the same threads, therefore they are interchangeable. I prefer the 302 atty because the atomizer bridge is wider and I think it produces better vapor.

I've been using the 302's on my VP/PT. They are amazing at 5v. Great flavor and vapor.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines