ant88 Posted March 2, 2019 Share Posted March 2, 2019 I brought a brand new predator 228 220w mod today I connected my dead rabbit tank and I have a short circuit problem how do I fix this ? I have cleaned my mod for the past hour I have changed my coil with the pre build I got from eBay still the same problem Any help or advice as when I connect my tank back up to my old tank there is no short circuit. I'm thinking something to do with the screw at bottom of the tank ? As the hole is deeper for the connection on my mod for the screw on my tank then my old mod. But I'm not sure if it's ok to turn the screw at bottom of tank. Thank you Link to comment Share on other sites More sharing options...
cany Posted March 2, 2019 Share Posted March 2, 2019 have you tied the tank on a different Mod Link to comment Share on other sites More sharing options...
cany Posted March 2, 2019 Share Posted March 2, 2019 Just looked the dead rabbit is an RDA correct? Link to comment Share on other sites More sharing options...
ant88 Posted March 2, 2019 Author Share Posted March 2, 2019 Yes it is a rda and it works fine on my old mod but new tank having short circuit I brought the new one as it's better for ohm I was told Link to comment Share on other sites More sharing options...
cany Posted March 2, 2019 Share Posted March 2, 2019 could be an OHM Issue with new mod Link to comment Share on other sites More sharing options...
ant88 Posted March 2, 2019 Author Share Posted March 2, 2019 How do I know of it is my ohm is 19 running at 80w Link to comment Share on other sites More sharing options...
cany Posted March 2, 2019 Share Posted March 2, 2019 Will your new Mod fire that low? Link to comment Share on other sites More sharing options...
cany Posted March 2, 2019 Share Posted March 2, 2019 Ok took a look the Mod specs make sure your not in TC mode Link to comment Share on other sites More sharing options...
ant88 Posted March 2, 2019 Author Share Posted March 2, 2019 I'm defintly Bron TC mode tc mode and yes it fires as low at 5 watt I'm not having the problem as much now it just happens from time to time Link to comment Share on other sites More sharing options...
cany Posted March 2, 2019 Share Posted March 2, 2019 Maybe a dirty 510 connection then if it works from time too time Link to comment Share on other sites More sharing options...
ant88 Posted March 3, 2019 Author Share Posted March 3, 2019 What is a 510 conmection ? Link to comment Share on other sites More sharing options...
cany Posted March 3, 2019 Share Posted March 3, 2019 The connection where the tank screws into the Mod Link to comment Share on other sites More sharing options...
ant88 Posted March 3, 2019 Author Share Posted March 3, 2019 It's new and I've cleaned it so many times Link to comment Share on other sites More sharing options...
cany Posted March 3, 2019 Share Posted March 3, 2019 (edited) Watts too high for coil? Edited March 3, 2019 by cany Link to comment Share on other sites More sharing options...
Bebop Posted March 3, 2019 Share Posted March 3, 2019 Is the center pin, down in the hole, on your mod spring loaded? or is it adjustable? the center pin on your tank is not reaching the center pin on your mod. some things to check: 1. if the center pin on your mod is adjustable, you need to raise it. 2. If it's spring loaded, it may be stuck down. use a small screw driver, needle or similar to pop it back up. sometimes on new mods the spring loaded center pin is a little rough. work it a few times to make sure its fully extended. Keep it clean and juice free so it doesnt get stuck down. 3. On your tank, when you screw the coil in, it needs to be in all the way. it pushes on the center pin of your tank and has to be all the way screwed in, or, you need to slightly pull out the center pin on the bottom of your tank. hope that helps Link to comment Share on other sites More sharing options...
ant88 Posted March 4, 2019 Author Share Posted March 4, 2019 It was the centre pin thank you Link to comment Share on other sites More sharing options...
zicjam Posted March 6, 2019 Share Posted March 6, 2019 Using mod or tank can be very problematic in the initial days when you start vaping. Even I am a new vaper and currently trying to fix myself with a new vape accessory. Can anyone tell me about the accessories sold by Vaping Vibe since I have been recommended this store by one of my friends? Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now