cany Posted October 13, 2018 Share Posted October 13, 2018 Im looking for a wire to build on my subtank mini for TC been using Nickel for a while now in my Invader mini it only supports nickel. I want too use the tank on other mods that support more TC options Looking for a build around 0.15 and a wire I can use for it and a build if anyone has one. Thanks Link to comment Share on other sites More sharing options...
FXRich Posted October 13, 2018 Share Posted October 13, 2018 4/5 wraps of 22g 316 will give you about .15 ohms. I use 6 wraps of 28g 316 and get .7 ohms. Nice thing about ss316 is you can use it in TC or watts. I have found watts is better for coil killing juice, but that's just my opinion. Link to comment Share on other sites More sharing options...
cany Posted October 13, 2018 Author Share Posted October 13, 2018 6 hours ago, FXRich said: 4/5 wraps of 22g 316 will give you about .15 ohms. I use 6 wraps of 28g 316 and get .7 ohms. Nice thing about ss316 is you can use it in TC or watts. I have found watts is better for coil killing juice, but that's just my opinion. Thanks Rich Link to comment Share on other sites More sharing options...
cany Posted October 13, 2018 Author Share Posted October 13, 2018 Rich I have some 26ga ss316 Anything I can do with that until I can get 22? Link to comment Share on other sites More sharing options...
FXRich Posted October 13, 2018 Share Posted October 13, 2018 4 hours ago, cany said: Rich I have some 26ga ss316 Anything I can do with that until I can get 22? 5 wraps with a 3mm id should give you about .3 ohms 4 wraps should be about .25. I find that my best coils are between 5 and 7 wraps. I assume you are using the RBA that came with your subtank mini, so you should be able to get 7 wraps to fit. Experiment a little, and see whats best for you. Link to comment Share on other sites More sharing options...
cany Posted October 14, 2018 Author Share Posted October 14, 2018 23 hours ago, FXRich said: 5 wraps with a 3mm id should give you about .3 ohms 4 wraps should be about .25. I find that my best coils are between 5 and 7 wraps. I assume you are using the RBA that came with your subtank mini, so you should be able to get 7 wraps to fit. Experiment a little, and see whats best for you. Thanks Rich yes Im using the RBA that came with it Link to comment Share on other sites More sharing options...
cany Posted October 28, 2018 Author Share Posted October 28, 2018 @FXRich spaced or tight wraps ? Link to comment Share on other sites More sharing options...
FXRich Posted October 28, 2018 Share Posted October 28, 2018 2 hours ago, cany said: @FXRich spaced or tight wraps ? I always use spaced wraps, I make the coil using tight wraps, then stick a needle between the wraps to get them spaced evenly after it is installed in the RBA, works for me. Bebop 1 Link to comment Share on other sites More sharing options...
cany Posted October 28, 2018 Author Share Posted October 28, 2018 Its tough getting 5 spaced wraps on the mini RDA Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now