CoryTheNube Posted August 27, 2018 Share Posted August 27, 2018 Hello everyone. I’m new to this world. I’m using the 220w Alien with a baby beast atomizer. The batteries I’ve bought and most of the ones I’ve seen say 3.7 V. When I vape at the low end wattage (50w) for the .4 OHM coil my voltage is 4.619. If I drop it to 30w then I get a reading of 3.593 volts. I’m assuming the batteries say 3.7 to indicate the safe level. By using the suggested watts for the coil I’m going above that. But when looking for different batteries I noticed most are 3.7. Leading me to think that this is okay. But I don’t want to use it dangerously. Help. Link to comment Share on other sites More sharing options...
Walt Posted August 27, 2018 Share Posted August 27, 2018 Watch this guy's videos. He is the guru of vape batteries.. https://www.youtube.com/channel/UCePHh3NMvu3rW2LFJeOWo-Q There is a lot going on inside of regulated mods. Battery Mooch explains it pretty well. This is not to put you off from asking questions here but the videos will give you a jump start on understanding the whole thing. Oh, and Welcome! By the way.... CoryTheNube 1 Link to comment Share on other sites More sharing options...
CoryTheNube Posted August 27, 2018 Author Share Posted August 27, 2018 The link won’t load. Something with the URL. What’s his name ? Oh battery mooch. I’ll look him up that way. Thank you. Link to comment Share on other sites More sharing options...
Walt Posted August 27, 2018 Share Posted August 27, 2018 34 minutes ago, CoryTheNube said: The link won’t load. Something with the URL. What’s his name ? Oh battery mooch. I’ll look him up that way. Thank you. Weird, Google Battery Mooch youtube. The guy is really sharp. Obviously sharper than me trying to post a link. Link to comment Share on other sites More sharing options...
Tam Posted August 28, 2018 Share Posted August 28, 2018 11 hours ago, Walt said: Weird, Google Battery Mooch youtube. The guy is really sharp. Obviously sharper than me trying to post a link. Weird. The link loaded just fine for me... Walt 1 Link to comment Share on other sites More sharing options...
CoryTheNube Posted August 28, 2018 Author Share Posted August 28, 2018 Not sure. But I found him. He has a wealth of info. Thanks you guys. I’m waiting on my RDA to show up. I think I should have started with something more basic. I’ve got a Cartel coming that is apparently very similar to the Drop. Hope I’ll get the hang of it. Walt 1 Link to comment Share on other sites More sharing options...
Bebop Posted August 28, 2018 Share Posted August 28, 2018 I just want to add for edumacational purposes, youh understand... Volts vs Watts you're looking at two sides of the same equation. Watts = Amps x Volts So when you change "watts" on your device, you are really adjusting the voltage. As your "watts" reduce your voltage drops with it. If I were to draw a piss poor analogy, think of it like the equation 2 + 2 = 4. If I change the 4 to 3, I automatically have to reduce the 2 to 1. (1 + 2 = 3) the 2 sides of the equation are "tied" together. so when you change your wattage and see your voltage changing that is what you are seeing; the two sides of the equation "balancing". What we are concerned with is exceeding the amp rating of our battery. Amps are calculated by watts ÷ volts. ex: 60watts ÷ 3.7 volts = 16.2 amps. Your battery has to be rated for more than that amount or it goes *boom* This is why your battery "shuts down" at 3.2 volts minimum because you can see that if your volts dropped to 2 volts, at 60 watts you would be drawing 30 amps! yeah, *boom* A regulated mod is designed to keep the voltage constant as the battery discharges. That keeps you safe and happy. This is just a simple, practical explanation and is in no way intended to inform, insult, offend, challenge or disrespect any real electrical engineer. No real engineers were harmed in this explanation. Walt and Tam 2 Link to comment Share on other sites More sharing options...
CoryTheNube Posted August 28, 2018 Author Share Posted August 28, 2018 Great input. Thank you. I’ve grasped that. I watched a few more videos dumbed down a bit and it made sense. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now