MrBogdi Posted January 7, 2018 Share Posted January 7, 2018 Hello, i am new to vaping and i have 2x of samsung 25R and one Sony VTC5 is it will be ok if i put them together? Link to comment Share on other sites More sharing options...
Squid Posted January 7, 2018 Share Posted January 7, 2018 It is generally not advised to mix battery types in a devise. There are too many variables in the manufacturing process, batteries rated the same by 2 different manufacturers could be vastly different in performance. Link to comment Share on other sites More sharing options...
MrBogdi Posted January 7, 2018 Author Share Posted January 7, 2018 It is generally not advised to mix battery types in a devise. There are too many variables in the manufacturing process, batteries rated the same by 2 different manufacturers could be vastly different in performance.But the only thing is different between this bateries is Amps Sony has 20A and Samsung 25A so it is still bad to use them? Link to comment Share on other sites More sharing options...
Walt Posted January 7, 2018 Share Posted January 7, 2018 @Squid nailed it for you. Not good practice. Will you have a catastrophic failure? Probably not. Most will go as far as to "marry" batteries, all the same make and model, all the same age, all always charged together. Many mods will refuse to operate if they sense the batteries are too different in charge levels. And yes, the batteries you are using will discharge at different rates. Link to comment Share on other sites More sharing options...
Rixter Posted January 7, 2018 Share Posted January 7, 2018 (edited) 3 hours ago, MrBogdi said: Hello, i am new to vaping and i have 2x of samsung 25R and one Sony VTC5 is it will be ok if i put them together? Do a little Googling and you'll find that nobody recommends using anything other than mated sets of batteries in a multi-battery mod...all bought at the same time and charged together as a set...every time. Edited January 7, 2018 by Rixter Link to comment Share on other sites More sharing options...
MrBogdi Posted January 7, 2018 Author Share Posted January 7, 2018 [mention=35022]Squid[/mention] nailed it for you. Not good practice. Will you have a catastrophic failure? Probably not. Most will go as far as to "marry" batteries, all the same make and model, all the same age, all always charged together. Many mods will refuse to operate if they sense the batteries are too different in charge levels. And yes, the batteries you are using will discharge at different rates. Oh, ok thank you a lot Link to comment Share on other sites More sharing options...
MrBogdi Posted January 7, 2018 Author Share Posted January 7, 2018 Do a little Googling and you'll find that nobody recommends using anything other than mated sets of batteries in a multi-battery mod...all bought at the same time and charged together as a set...every time.Oh, ok Thanks mate Rixter 1 Link to comment Share on other sites More sharing options...
Tam Posted January 7, 2018 Share Posted January 7, 2018 (edited) Nope, not a good idea. Listen to the wise words of @Squid, @Rixter and @Walt. They give good advice to not use the batteries you currently have. Go get three new batteries of the same make and model, it's much cheaper to do that than to pay a hospital bill. Edited January 7, 2018 by Tam Bad spelling due to low caffeine intake. Remedied both. Walt and Rixter 1 1 Link to comment Share on other sites More sharing options...
cany Posted January 7, 2018 Share Posted January 7, 2018 I mark mine 1.2.3 all the same batts they get charged together and put back in same slots in my RX200 Walt 1 Link to comment Share on other sites More sharing options...
MrBogdi Posted January 7, 2018 Author Share Posted January 7, 2018 Nope, not a good idea. Listen to the wise words of [mention=35022]Squid[/mention], [mention=15088]Rixter[/mention] and [mention=40355]Walt[/mention]. They give good advice to not use the batteries you currently have. Go get three new batteries of the same make and model, it's much cheaper to do that than to pay a hospital bill. [emoji4]Lol I mark mine 1.2.3 all the same batts they get charged together and put back in same slots in my RX200And why u marking them? Link to comment Share on other sites More sharing options...
cany Posted January 7, 2018 Share Posted January 7, 2018 So I can put them back into the same slots in Mod Link to comment Share on other sites More sharing options...
MrBogdi Posted January 7, 2018 Author Share Posted January 7, 2018 So I can put them back into the same slots in ModWhy you cant just put them in different slots? I dont understand Link to comment Share on other sites More sharing options...
cany Posted January 7, 2018 Share Posted January 7, 2018 3 minutes ago, MrBogdi said: 27 minutes ago, cany said: So I can put them back into the same slots in Mod Why you cant just put them in different slots? I dont understand Thats what I was taught to do with married batts The mod recognizes each batt I guess MrBogdi and Walt 2 Link to comment Share on other sites More sharing options...
leadpipe58 Posted January 8, 2018 Share Posted January 8, 2018 I have been playing with these batteries for a long time. I fly RC planes. In a regulated device the reason for marrying you batteries is a battery will only have so many charge cycles and the theory is to keep the batteries together You will get the most life out of them. They will all were out evenly. In a regulated device it will only run as well as the weakest battery (like a chain, only as good as the weakest link). Witch is why you should not mix battery's. Not because it might blow up but that it will only perform as well as the weakest battery. So marry them to get the most out of them. Walt 1 Link to comment Share on other sites More sharing options...
MrBogdi Posted January 8, 2018 Author Share Posted January 8, 2018 I have been playing with these batteries for a long time. I fly RC planes. In a regulated device the reason for marrying you batteries is a battery will only have so many charge cycles and the theory is to keep the batteries together You will get the most life out of them. They will all were out evenly. In a regulated device it will only run as well as the weakest battery (like a chain, only as good as the weakest link). Witch is why you should not mix battery's. Not because it might blow up but that it will only perform as well as the weakest battery. So marry them to get the most out of them. Oh, i unedrstand now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now