Mike Posted November 19, 2017 Share Posted November 19, 2017 Ok, so I know you have to push down and turn like a medicine bottle but I think what might have happened is that I tightened it too much last fill. Now no matter how hard I push down I can't get it to catch. It just spins and I can't feel the catch lock. Is there any remedy to this? Link to comment Share on other sites More sharing options...
Tam Posted November 20, 2017 Share Posted November 20, 2017 I'm thinking a pair of pliers or channel locks. It would render that cap and bottle useless so you'll need to transfer the liquid into a different bottle... Link to comment Share on other sites More sharing options...
FXRich Posted November 20, 2017 Share Posted November 20, 2017 If I'm reading it right the child proof cap is on your Templar tank, that is the reason I don't buy tanks with a child proof fill, I'm too apt to grab a hammer. You could try to soak it in some very hot water, getting it hot might loosen it enough, other than that don't know what to tell you. Link to comment Share on other sites More sharing options...
Walt Posted November 20, 2017 Share Posted November 20, 2017 Ya, I really think you're hosed. If you can't activate the catch the top aint-a-goin-nowhere. Link to comment Share on other sites More sharing options...
Squid Posted November 20, 2017 Share Posted November 20, 2017 I wish I had an answer for you, but @christopher should be able to help out on this one. leadpipe58 1 Link to comment Share on other sites More sharing options...
cany Posted November 20, 2017 Share Posted November 20, 2017 I just tried this on mine use a small thin screw driver stick it in the airflow slot when the black ring is up push the screwdriver same was as you unscrew the top off Link to comment Share on other sites More sharing options...
Mike Posted November 21, 2017 Author Share Posted November 21, 2017 cany got it right. That is what I did. A small flat screwdriver down the airflow and I backed it out. I did turn it too tight and wore off the catch that allows it to grab and open so now I always have to use the screwdriver but it still works fine. Not a big deal. I like the Templar a lot but not a fan of child proof caps. cany 1 Link to comment Share on other sites More sharing options...
cany Posted November 22, 2017 Share Posted November 22, 2017 47 minutes ago, Mike said: cany got it right. That is what I did. A small flat screwdriver down the airflow and I backed it out. I did turn it too tight and wore off the catch that allows it to grab and open so now I always have to use the screwdriver but it still works fine. Not a big deal. I like the Templar a lot but not a fan of child proof caps. Glad I figured it would after I tried it I wasnt sure at first Link to comment Share on other sites More sharing options...
Walt Posted November 22, 2017 Share Posted November 22, 2017 1 hour ago, cany said: Glad I figured it would after I tried it I wasnt sure at first Alright @cany! I thought for sure it was toast. Link to comment Share on other sites More sharing options...
Bubble2553 Posted October 14, 2018 Share Posted October 14, 2018 So my aramax power vape has a childproof cap where you have to push it down then twist it, but when I push it down and it catches, it doesn’t twist or turn? Link to comment Share on other sites More sharing options...
Christopher Posted October 14, 2018 Share Posted October 14, 2018 9 hours ago, Bubble2553 said: So my aramax power vape has a childproof cap where you have to push it down then twist it, but when I push it down and it catches, it doesn’t twist or turn? You'll probably get more answers with a new thread (This one is quite old and probably forgotten about) Link to comment Share on other sites More sharing options...
Bubble2553 Posted October 14, 2018 Share Posted October 14, 2018 I’m new to this page and I’m not sure how to do that Link to comment Share on other sites More sharing options...
cany Posted October 14, 2018 Share Posted October 14, 2018 1 hour ago, Bubble2553 said: I’m new to this page and I’m not sure how to do that Just start a new thread Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now