Jump to content

Recommended Posts

Posted

Ok, so I know you have to push down and turn like a medicine bottle but I think what might have happened is that I tightened it too much last fill.  Now no matter how hard I push down I can't get it to catch.  It just spins and I can't feel the catch lock.  Is there any remedy to this?   

Posted

I'm thinking a pair of pliers or channel locks. It would render that cap and bottle useless so you'll need to transfer the liquid into a different bottle...

Posted

If I'm reading it right the child proof cap is on your Templar tank, that is the reason I don't buy tanks with a child proof fill, I'm too apt to grab a hammer.

You could try to soak it in some very hot water, getting it hot might loosen it enough, other than that don't know what to tell you.

Posted

Ya, I really think you're hosed.  If you can't activate the catch the top aint-a-goin-nowhere.  

Posted

I just tried this on mine  use a small thin screw driver stick it in the airflow slot when the black ring is up push the  screwdriver  same was as you unscrew the top off

Posted

cany got it right.  That is what I did.  A small flat screwdriver down the airflow and I backed it out.   I did turn it too tight and wore off the catch that allows it to grab and open so now I always have to use the screwdriver but it still works fine.  Not a big deal.  I like the Templar a lot but not a fan of child proof caps.

Posted
47 minutes ago, Mike said:

cany got it right.  That is what I did.  A small flat screwdriver down the airflow and I backed it out.   I did turn it too tight and wore off the catch that allows it to grab and open so now I always have to use the screwdriver but it still works fine.  Not a big deal.  I like the Templar a lot but not a fan of child proof caps.

Glad I figured it would after I tried it I wasnt sure at first

Posted
1 hour ago, cany said:

Glad I figured it would after I tried it I wasnt sure at first

Alright @cany!  I thought for sure it was toast.  

  • 10 months later...
Posted
9 hours ago, Bubble2553 said:

So my aramax power vape has a childproof cap where you have to push it down then twist it, but when I push it down and it catches, it doesn’t twist or turn? 

You'll probably get more answers with a new thread :) (This one is quite old and probably forgotten about) 

Posted
1 hour ago, Bubble2553 said:

I’m new to this page and I’m not sure how to do that 🙄

 

Just start a new thread

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines