Walt Posted October 22, 2017 Posted October 22, 2017 Hey folks, I'm finding myself in foreign territory. I picked up a Beyond Vape Spire. Cute little unit. 18350 & 18650 compatible with VV and VW. Twenty bucks for a hundred twenty unit. Picture below. Problem is it wants a 1.5 ohm coil or better. I don't have any 22mm atties that I can cram enough wire into to get that kind of resistance. I see that a Kanger Subtank Mini and an Aspire Nautilus 2 do have coils in that range. Are either of these tanks any good? Any better ideas? Appreciate the help as always!!!
Tam Posted October 22, 2017 Posted October 22, 2017 If you're looking for a tank that takes 1.5 ohm coils or higher, if you can find them, the Kanger Pro Tank 3 or 4, the Aerotank V2, or my personal favorite is the Aspire Triton V2 take those coils. Walt 1
FXRich Posted October 22, 2017 Posted October 22, 2017 I have and still use KPT2 tanks when I don't want to fog the room up, but the airflow doesn't come close to the airflow of the subtank mini. The thing about the Subtank mini or the Toptank mini is it comes with a RBA, if you use 30g kanthal its easy to make a 1.5 or above coil.
Walt Posted October 22, 2017 Author Posted October 22, 2017 1 hour ago, FXRich said: I have and still use KPT2 tanks when I don't want to fog the room up, but the airflow doesn't come close to the airflow of the subtank mini. The thing about the Subtank mini or the Toptank mini is it comes with a RBA, if you use 30g kanthal its easy to make a 1.5 or above coil. I'm gonna keep building for awhile before I attempt winding 30g. I feel like I'm walking on egg shells with 28g trying not to deform it during mounting and wicking. I found a Triton at a real nice price and have it on order along with some coils. Maybe this will pan out, maybe not. Maybe I have a very nice looking conversation piece, lol.
Tam Posted October 22, 2017 Posted October 22, 2017 1 hour ago, FXRich said: I have and still use KPT2 tanks when I don't want to fog the room up, but the airflow doesn't come close to the airflow of the subtank mini. The thing about the Subtank mini or the Toptank mini is it comes with a RBA, if you use 30g kanthal its easy to make a 1.5 or above coil. When KPT 2 and 3 were popular, they came out with a variable airflow bottom that you could buy to help out. Basically, it turned the KPT into an Aerotank.
Tam Posted October 22, 2017 Posted October 22, 2017 1 minute ago, Walt said: I'm gonna keep building for awhile before I attempt winding 30g. I feel like I'm walking on egg shells with 28g trying not to deform it during mounting and wicking. I found a Triton at a real nice price and have it on order along with some coils. Maybe this will pan out, maybe not. Maybe I have a very nice looking conversation piece, lol. Hopefully, you found a Triton V2 and not the first version. I wound up giving the first one to @Earthling789 because I couldn't get it to work right. The second version fixed the problem so well that I stocked up on them for when they were no longer available (I might've gotten a little carried away as I now have 15 but have four going in rotation).
Walt Posted October 22, 2017 Author Posted October 22, 2017 (edited) 5 minutes ago, Tam said: Hopefully, you found a Triton V2 and not the first version. I wound up giving the first one to @Earthling789 because I couldn't get it to work right. The second version fixed the problem so well that I stocked up on them for when they were no longer available (I might've gotten a little carried away as I now have 15 but have four going in rotation). OMG! I am seriously laughing out loud right now. The queen of back-ups bares her soul. Fifteen?! That just might be overkill, lol. Anyway, I've been meaning to ask you, I hope the draw is just a little looser than the Nautilus? That thing was like sucking on a smashed straw. Oh and edit. Yes it is a Triton II. Glad to hear I made a good choice. Fifteen.... I don't even have fifteen pairs of underwear, lol. Edited October 22, 2017 by Walt
Tam Posted October 22, 2017 Posted October 22, 2017 2 minutes ago, Walt said: OMG! I am seriously laughing out loud right now. The queen of back-ups bares her soul. Fifteen?! That just might be overkill, lol. Anyway, I've been meaning to ask you, I hope the draw is just a little looser than the Nautilus? That thing was like sucking on a smashed straw. With the airflow wide open it's much looser than a Nautilus, imo. Just a little tight for direct lung but plenty loose for a MTL device. I usually have it set at 3/4 open and that works for me. Walt 1
Walt Posted October 22, 2017 Author Posted October 22, 2017 1 minute ago, Tam said: With the airflow wide open it's much looser than a Nautilus, imo. Just a little tight for direct lung but plenty loose for a MTL device. I usually have it set at 3/4 open and that works for me. Perfect! I am getting excited now. I think I am going to enjoy this. I love the draw on the Templar and IMO it is just a little restrictive to be DL.
cany Posted October 22, 2017 Posted October 22, 2017 Just now, Walt said: Perfect! I am getting excited now. I think I am going to enjoy this. I love the draw on the Templar and IMO it is just a little restrictive to be DL. Needs more air for DL
Walt Posted October 22, 2017 Author Posted October 22, 2017 Just now, cany said: Needs more air for DL Agreed!
FXRich Posted October 22, 2017 Posted October 22, 2017 58 minutes ago, Walt said: I'm gonna keep building for awhile before I attempt winding 30g. I feel like I'm walking on egg shells with 28g trying not to deform it during mounting and wicking. I found a Triton at a real nice price and have it on order along with some coils. Maybe this will pan out, maybe not. Maybe I have a very nice looking conversation piece, lol. I currently use 32g kanthal to rebuild KPT coils, only get 4 wraps for a 1.8 coil, they heat up real fast.
FXRich Posted October 22, 2017 Posted October 22, 2017 1 hour ago, Tam said: When KPT 2 and 3 were popular, they came out with a variable airflow bottom that you could buy to help out. Basically, it turned the KPT into an Aerotank. I have the adjustable airflow on the KPT2 tanks that I have, even have a couple extra for the tanks that are still in the box that I have stashed away.
Walt Posted October 22, 2017 Author Posted October 22, 2017 8 minutes ago, FXRich said: I currently use 32g kanthal to rebuild KPT coils, only get 4 wraps for a 1.8 coil, they heat up real fast. Holy crap! I'll bet.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now