Cleito

[tea2085]

Just got my new Cleito tank but when I connect it to my eleaf battery- battery says  atomizer too low. Do I need a special battery for this tank?   Paul

[FXRich]

My guess would be your coil resistance is too low for the mod you are using, try a higher resistance coil.

You didn't say what eleaf mod you are using or the resistance of the coil, if you were more specific we could help more.

[tea2085]

It is the eleaf stiick. The Cleito has a 4 ohm coil and comes with a 2 ohm also.

[FXRich]

Most isticks will fire down to .1 ohms, some even lower using TC. Could be a short in the coil. Coils that come with tanks aren't the best, some people won't even use them.

Try a different coil. 

[tea2085]

Different coil did not work. My istick goes down to 2 watts-don't know about ohms. Thanks for helping. Paul

[Tam]

3 hours ago, tea2085 said:

Different coil did not work. My istick goes down to 2 watts-don't know about ohms. Thanks for helping. Paul

Ohms measure the resistance of your heating element or what we call a "coil."

 

5 hours ago, tea2085 said:

It is the eleaf stiick. The Cleito has a 4 ohm coil and comes with a 2 ohm also.

There is a big difference between a 4 ohm (4.0 ohm) and a 0.4 ohm coil. Also, the 2 ohm is actually a 0.2 ohm coil. Which Eleaf iStick do you have? There are several: 20W, 30W, 40W, 50W,  60W, 80W, etc. Most will fire down to a 0.1 ohm coil but some will not. If you could tell us which iStick you have, we could help you better.

[tea2085]

I bought the stick quite some time ago and all it says is eleaf on one side and istick on the other. Heck with it- tell me what battery I could buy to make the Cleito work, should have ordered the kit but I didn't.  Paul

[Bebop]

If you raise the wattage as high as it will go (without firing it) what does it say?

[tea2085]

15.9 watts

[Bebop]

Hmmmmm......that's unusual.   You're absolutely sure that is as high as it goes?

[Bebop]

Well if that's true then likely you have a device that won't fire a coil that low.

[Bebop]

You would probably want the 40watt iStick minimum if you are going to replace it.

[tea2085]

What battery should I buy? Thanks for your help

[Bebop]

ELeaf iStick TC40W. (2600mah)  or TC80W (5000mah) If you want internal battery.

Edited February 1, 2017 by Bebop

[Walt]

1 minute ago, Bebop said:

ELeaf iStick TC40W. (2600mah)  or TC80W (5000mah) If you want internal battery.

Just watching this thread to learn myself.  With the wide variety of coils available for the Cleito wouldn't you need at least a two battery series mod to take full advantage of all the coils?

[FXRich]

 

42 minutes ago, Walt said:

Just watching this thread to learn myself.  With the wide variety of coils available for the Cleito wouldn't you need at least a two battery series mod to take full advantage of all the coils?

A single battery mod should handle either the .2 or the .4 ohm coils, but the TC80w would handle it better than the TC40w in my opinion. I don't use high wattage, about 40w max, but the dual battery mods supply longer battery life when compared to the single battery mods.

The .4 cleito coil is rated 40 - 60 watts, and the .2 is rated for 55 - 70 watts also there is a .15 coil rated at 120w, but don't know if it will fit in a standard cleito, or if it just fits the 120w cleito. For the 120w coil you will need a dual battery mod.

 

[Tam]

I love the Eleaf iPower 80W TC. It comes with a 5000 mAh internal battery so I only have to charge it once a week or so. We have them at our own Vapor Talk store:

https://www.vaportalk.com/us/product/eleaf-ipower-80w-tc-mod-white/