theclaw20 Posted April 5, 2017 Share Posted April 5, 2017 How big are the post holes on the rda decks? I just received some staple staggered fused Clapton coils in the mail and they are too wide for the slots in my TFV8 deckSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 5, 2017 Share Posted April 5, 2017 Might have to get an rta with one of those clamp down decks. like the pharoah rta Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Ok im running the 3 coil RBA. When I heated it, I had trouble getting one of the coils to fire as hot as the other two. I ended up getting it pretty close. Now while vaping, it seems to be working well but when I look at the juice holes only one seems to be spitting out air into the tank.Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
smacksy Posted April 9, 2017 Share Posted April 9, 2017 Ok im running the 3 coil RBA. When I heated it, I had trouble getting one of the coils to fire as hot as the other two. I ended up getting it pretty close. Now while vaping, it seems to be working well but when I look at the juice holes only one seems to be spitting out air into the tank. Sent from my Moto G (5) Plus using Tapatalk Just curious if you can can you post a cloud pic you get with that build.. I'm a cloud chaser and always looking for a good RBA to blow decent clouds.. As far as your coils not heating up equally I would suggest to make sure the legs are equal and tight in their posts... are these pre wrapped coils or did you wrap them your self?... Sent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 I probably should have test fired it after wicking to see if all 3 coils were firing. I dry burned them b4 wicking but after wicking and juicing I just threw the tank onSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
Tam Posted April 9, 2017 Share Posted April 9, 2017 5 minutes ago, theclaw20 said: Ok im running the 3 coil RBA. When I heated it, I had trouble getting one of the coils to fire as hot as the other two. I ended up getting it pretty close. Now while vaping, it seems to be working well but when I look at the juice holes only one seems to be spitting out air into the tank. And what does your independent coil meter read? Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Here ya goSent from my Moto G (5) Plus using Tapatalk smacksy and Walt 2 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 0.19 ohmsSent from my Moto G (5) Plus using Tapatalk smacksy 1 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 I slightly spaced the coils and the one that wasn't firing as hot I tightened Sent from my Moto G (5) Plus using Tapatalk smacksy 1 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 WtF now it's not working at all after I did that!Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Ok now it's workintSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 No idea what use a cloud photo would be but here u goSent from my Moto G (5) Plus using Tapatalk smacksy 1 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Now it's not working again jfcSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 WTF what just happened??? Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 K just took batteries out of vape and back in now it's workingSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
smacksy Posted April 9, 2017 Share Posted April 9, 2017 lol posting a cloud pic kind of shows others the kind of vapor they can expect to get if they chose to vape a tank or build like yours.... online reviewers blow clouds all the time, lol..for instance this pic is typical of the clouds I get with the Cloud Beast T12 coil... Rip Trippers always blows clouds on his reviews LOL Sent from my XT1585 using Tapatalk theclaw20 1 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Just curious if you can can you post a cloud pic you get with that build.. I'm a cloud chaser and always looking for a good RBA to blow decent clouds.. As far as your coils not heating up equally I would suggest to make sure the legs are equal and tight in their posts... are these pre wrapped coils or did you wrap them your self?... Sent from my XT1585 using Tapatalk Pre wrappedSent from my Moto G (5) Plus using Tapatalk smacksy 1 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Pre wrapped but I yanked on them a bit to try to get them positioned and firing right. I didn't touch the screwsSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Ohms are fluctuating between .18 and .19Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 9, 2017 Share Posted April 9, 2017 Im hitting it at 92 watts with preheat of 140 for 0.1 seconds Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
smacksy Posted April 9, 2017 Share Posted April 9, 2017 Ohms are fluctuating between .18 and .19 Sent from my Moto G (5) Plus using Tapatalk A trick I use to get resistance right is after my coils are installed I put the atty on a dedicated ohmmeter..I then touch the posts and legs with a small screwdriver looking for any fluctuations in ohms indicating a possible lose post screw or damage to the legs...usually a simple tightening down the right post screw fixes the problem.. Sent from my XT1585 using Tapatalk Bebop, Adversarious1 and Uncivil11 3 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 10, 2017 Share Posted April 10, 2017 I think the ohms are fine. .19 seems where it should be slightly spaced (.15 unspaced)Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
theclaw20 Posted April 10, 2017 Share Posted April 10, 2017 And it's a super flavorful cloudy vape at 100 watts 140 preheat. But only seeing airholes out of one hole is disconcertingSent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
smacksy Posted April 10, 2017 Share Posted April 10, 2017 And it's a super flavorful cloudy vape at 100 watts 140 preheat. But only seeing airholes out of one hole is disconcertingSent from my Moto G (5) Plus using Tapatalkif you're not getting a dry hit I wouldn't worry about itSent from my XT1585 using Tapatalk theclaw20 1 Link to comment Share on other sites More sharing options...
theclaw20 Posted April 10, 2017 Share Posted April 10, 2017 I wanna build a single coil tempered NI200 28 gauge between 11 or 12 wraps spaced on the RBA-T (~.15 ohms) The deck has plenty of room for it even with 2x spacing per wrap. I'd run it with temp control. It should be a great battery saving build, have really good flavor (tons of coil to cotton contact), and allow for a lot of use b4 needing rewicking/rebuilding.But... I'm puzzled about the wicking. There are 3 wicking holes and with 1 coil you'd normally use 2 wicking holes... Would I just split the cotton out of the edges of one or both of the coils and send cotton from one or both coil ends into multiple juice wells? Or just try to plug one of the holes with a thick wad of cotton?Is there a ceramic plug for 1 well for the RBA-T? My TFV12 RBA Edition didn't come with any ceramic plugs (they apparently make one for the dual coil velocity deck, but it wasn't in my kit).Sent from my Moto G (5) Plus using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts