Walt Posted January 15, 2017 Share Posted January 15, 2017 Found this on the Vaporesso website. Pretty neat! I may just do this. USD $49.80 from Vaporesso. Link to comment Share on other sites More sharing options...
Tam Posted January 15, 2017 Share Posted January 15, 2017 Interesting concept. I wonder how well they will sell? Link to comment Share on other sites More sharing options...
Walt Posted January 15, 2017 Author Share Posted January 15, 2017 3 minutes ago, Tam said: Interesting concept. I wonder how well they will sell? No idea. There are quite a few consumer models available marketed for cleaning jewelry. Functionally the same, I would assume. Industrially they have been used for a long time cleaning all kinds of things including circuit boards. I'm not advocating dumping your mod in one. Getting it dry would be a real problem. It does seem like a tidy, effortless, method. Link to comment Share on other sites More sharing options...
Walt Posted January 15, 2017 Author Share Posted January 15, 2017 Here's one from CoilMaster: Link to comment Share on other sites More sharing options...
Walt Posted January 15, 2017 Author Share Posted January 15, 2017 Here's quite a testimony to the concept. This guy also steeps eliquid in the thing. Hmmm...... Link to comment Share on other sites More sharing options...
Tam Posted January 15, 2017 Share Posted January 15, 2017 I know that some people use the ultrasonic cleaners to "age" their DIY juices faster. Walt 1 Link to comment Share on other sites More sharing options...
FXRich Posted January 15, 2017 Share Posted January 15, 2017 I use a ultrasound cleaner to clean my coils, it works very well. I have also used it to steep juice. The big difference between those cleaners and mine is the one I have holds about 1/2 gal of water, and has a heater. I usually wait until I have 10 - 15 coils to clean before I use it. Link to comment Share on other sites More sharing options...
Walt Posted January 15, 2017 Author Share Posted January 15, 2017 18 minutes ago, FXRich said: I use a ultrasound cleaner to clean my coils, it works very well. I have also used it to steep juice. The big difference between those cleaners and mine is the one I have holds about 1/2 gal of water, and has a heater. I usually wait until I have 10 - 15 coils to clean before I use it. Does the heater make a big difference? Looking around a little, I am becoming intrigued with these. Thinking of other things I could clean with them. Might be worth getting into a little more expensive unit. Link to comment Share on other sites More sharing options...
FXRich Posted January 15, 2017 Share Posted January 15, 2017 The heater does make a difference. The one I have will hold 2 liters, I originally got it to clean car parts like spark plugs and injectors. Its mostly Stainless steel, and will keep the water temp at about 180f. I have found it will clean the crud off a coil without dry burning. I don't use it much for steeping because it also removes labels. Link to comment Share on other sites More sharing options...
Walt Posted January 15, 2017 Author Share Posted January 15, 2017 8 minutes ago, FXRich said: The heater does make a difference. The one I have will hold 2 liters, I originally got it to clean car parts like spark plugs and injectors. Its mostly Stainless steel, and will keep the water temp at about 180f. I have found it will clean the crud off a coil without dry burning. I don't use it much for steeping because it also removes labels. Thank you! I hate buying things multiple times until I get the one that works. I have a bike that has a very finicky set of carbs. Every spring, even with stabilizer, I'm tearing it down and blowing out the jets. I would much rather sonic clean the carbs and get it done right. Link to comment Share on other sites More sharing options...
FXRich Posted January 15, 2017 Share Posted January 15, 2017 Just now, Walt said: Thank you! I hate buying things multiple times until I get the one that works. I have a bike that has a very finicky set of carbs. Every spring, even with stabilizer, I'm tearing it down and blowing out the jets. I would much rather sonic clean the carbs and get it done right. I have a 850 Norton Commando, and the Amal carbs fit nicely, and clean up really well. When cleaning car parts I use a solvent instead of water, but no heat. I have also used it to clean Harley parts. With the SS tank it is easy to switch between solvent and water. Walt 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now