smacksy Posted October 3, 2016 Posted October 3, 2016 Because those claptons were too hot for me in the Griffin I never ran them in the RTA-2.. lolSent from my XT1585 using Tapatalk
Edna Posted October 3, 2016 Posted October 3, 2016 1 hour ago, cany said: Thank you Im waiting on another tank apparently I melted the insulator in mine messing with Clapton wire lol I never even got too vape it That's a drag that it melted. I don't know if you've looked, but Slowtech carries spare insulators for a bunch of different tanks. Since you've got another coming, you can wait on a slowboat from China so you have two tanks Just a thought.
smacksy Posted October 3, 2016 Posted October 3, 2016 @canyI never had the RTA-2 apart..I'm assuming the insulator is under the center block.. correct?Sent from my XT1585 using Tapatalk
smacksy Posted October 3, 2016 Posted October 3, 2016 This may sound stupid but how does one melt an insulator? Short? I just know they can handle alot of heat, especially peek insulators..Glad I never had one melt, even in RDAs... LolSent from my XT1585 using Tapatalk
cany Posted October 3, 2016 Author Posted October 3, 2016 1 hour ago, smacksy said: Because those claptons were too hot for me in the Griffin I never ran them in the RTA-2.. lol Sent from my XT1585 using Tapatalk Yup take out the510c center pin then unscrew deck them unscrew the pin that holds it 31 minutes ago, smacksy said: This may sound stupid but how does one melt an insulator? Short? I just know they can handle alot of heat, especially peek insulators.. Glad I never had one melt, even in RDAs... Lol Sent from my XT1585 using Tapatalk I might of got it too hot lol It looks like a type of plastic smacksy 1
FXRich Posted October 3, 2016 Posted October 3, 2016 30 minutes ago, smacksy said: This may sound stupid but how does one melt an insulator? Short? I just know they can handle alot of heat, especially peek insulators.. Glad I never had one melt, even in RDAs... Lol Sent from my XT1585 using Tapatalk Dry burning a Clapton coil might get it hot enough, I just ordered a 160w Dripbox it comes with dual claptons installed, now I'm thinking about ripping them out and putting in a couple of other coils. smacksy 1
cany Posted October 3, 2016 Author Posted October 3, 2016 1 minute ago, FXRich said: Dry burning a Clapton coil might get it hot enough, I just ordered a 160w Dripbox it comes with dual claptons installed, now I'm thinking about ripping them out and putting in a couple of other coils. I was pulsing it too try to get the hot spots Not too mention I used SS wire in Watt mode which I think Im not supposed too do
FXRich Posted October 3, 2016 Posted October 3, 2016 You can use SS in watt mode, I do it all the time, but I have noticed when dry burning it they seem to get hotter than dry burning Kanthal or Nichrome.
cany Posted October 3, 2016 Author Posted October 3, 2016 2 minutes ago, FXRich said: You can use SS in watt mode, I do it all the time, but I have noticed when dry burning it they seem to get hotter than dry burning Kanthal or Nichrome. It was ss3161l claptons
smacksy Posted October 3, 2016 Posted October 3, 2016 I ran the SS coils in the crown in watts mode..didn't hurt it at all..My experience with claptons is somewhat limited..I think the are overrated for flavor, a PITA to wrap and require too high of wattages to vape well..(the vape is too hot for me)... right now I'm really liking 24g Nichrome..I think I'm done with claptons, lolSent from my XT1585 using Tapatalk
Bebop Posted October 3, 2016 Posted October 3, 2016 Well since a short or near short equates to heat, I'd say that's how it's done. No doubt Claptons take a lot of juice to light up. One thing I've noticed is that claptons require more amps even given the same resistance as a standard subohm coil. Not sure why that is but a .3 kanthal wind and a .3 Clapton behave differently. Claptons get hot. I've tried them in my youde zephyrus and they heat that sucker up big time with a .5 coil and 40w. The tank gets literally almost too hot to handle. smacksy 1
FXRich Posted October 3, 2016 Posted October 3, 2016 5 minutes ago, smacksy said: I ran the SS coils in the crown in watts mode..didn't hurt it at all.. My experience with claptons is somewhat limited..I think the are overrated for flavor, a PITA to wrap and require too high of wattages to vape well..(the vape is too hot for me)... right now I'm really liking 24g Nichrome..I think I'm done with claptons, lol Right now I'm running a .5 SS coil in a RBA in a subtank mini in watts. The reason I'm running watts instead of TC is I only get 1 tank per coil with the coffee flavored juice in it when in TC, in watts I get 3 tanks per coil. Other juices in TC seem to last weeks between coil changes. I have to agree about Clapton coils, I wasn't impressed with them either. smacksy 1
cany Posted October 3, 2016 Author Posted October 3, 2016 Can I make a build in the Herakles rta 2 that will work decent under 80w
smacksy Posted October 3, 2016 Posted October 3, 2016 Can I make a build in the Herakles rta 2 that will work decent under 80wSure..I've got a killer dual coil 24g Nichrome build in this one..0.36 ohms and vapes great at a cool 50w...Sent from my XT1585 using Tapatalk
cany Posted October 4, 2016 Author Posted October 4, 2016 Thanks I gotta pick up some different types of wire smacksy 1
smacksy Posted October 4, 2016 Posted October 4, 2016 Thanks I gotta pick up some different types of wireI've tried other types and different gauges wire in both my Griffin and RTA-2... 24g Nichrome seems to work the best for me.. Nichrome has a slightly higher ramp up than Kanthel given the same gauge..I get a thick vape and have ran thru about 100mls of juice on this same build..it's still hitting awesome..good luck!Sent from my XT1585 using Tapatalk
cany Posted October 5, 2016 Author Posted October 5, 2016 Can you recommenced a Clapton Kanth wire from the VT store
smacksy Posted October 5, 2016 Posted October 5, 2016 Can you recommenced a Clapton Kanth wire from the VT storeI can't but maybe somebody else can chime in..Sent from my XT1585 using Tapatalk
Adversarious1 Posted October 5, 2016 Posted October 5, 2016 2 hours ago, cany said: Can you recommenced a Clapton Kanth wire from the VT store @cany, What is the target resistance you are shooting for, what will you be building on and will it be dual or single coil?
cany Posted October 5, 2016 Author Posted October 5, 2016 9 hours ago, Adversarious1 said: @cany, What is the target resistance you are shooting for, what will you be building on and will it be dual or single coil? .5 and under dual coils
Adversarious1 Posted October 6, 2016 Posted October 6, 2016 13 hours ago, cany said: .5 and under dual coils I would recommend this one. That is basic clapton wire with a 26 gauge core with 32 gauge outer. Two dual coils: 6 wraps on a 3mm bit with 5mm legs should get you right about .5 ohms. 5 wraps with everything else the same would get you about .4 ohms =/- .1 ohm.
cany Posted October 6, 2016 Author Posted October 6, 2016 1 minute ago, Adversarious1 said: I would recommend this one. That is basic Clapton wire with a 26 gauge core with 32 gauge outer. Two dual coils: 6 wraps on a 3mm bit with 5mm legs should get you right about .5 ohms. 5 wraps with everything else the same would get you about .4 ohms =/- .1 ohm. Thank you Sir
jasonculp Posted October 6, 2016 Posted October 6, 2016 On 10/4/2016 at 7:14 PM, cany said: Can you recommenced a Clapton Kanth wire from the VT store This is the one I am using. I use the one that @Adversarious1 uses also. I can't tell a lot of difference, but for some reason I really like the Nichrome/Kanthal combination. For what it is worth, I have been running a standard 26 GA 316SS and it isn't a lot different. I do think the Clapton has more flavor, but the quick heat up time (standard wire heats much quicker because the mass of the Clapton is so much more it takes more time to heat) smacksy 1
cany Posted October 6, 2016 Author Posted October 6, 2016 4 hours ago, jasonculp said: This is the one I am using. I use the one that @Adversarious1 uses also. I can't tell a lot of difference, but for some reason I really like the Nichrome/Kanthal combination. For what it is worth, I have been running a standard 26 GA 316SS and it isn't a lot different. I do think the Clapton has more flavor, but the quick heat up time (standard wire heats much quicker because the mass of the Clapton is so much more it takes more time to heat) Im gonna pickup a few different wires to try Thanks
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now