Lori s Posted September 18, 2016 Share Posted September 18, 2016 Is it best to run the istick pico 75w on wattage or does it work best on TC with the .05 coil?Sent from my SM-G935V using The Vapor Talk mobile app Link to comment Share on other sites More sharing options...
Edna Posted September 18, 2016 Share Posted September 18, 2016 Lori, I run mine in wattage mode but they can be run in TC it depends on your personal preference. I suggest you experiment with to see what suits your vaping style/juice best. There is no cookie cutter answer sorry. Link to comment Share on other sites More sharing options...
Lori s Posted September 18, 2016 Author Share Posted September 18, 2016 Thank you.i put the .05ohm coil in, but is it TI the one I use to set it on?Sent from my SM-G935V using The Vapor Talk mobile appOops I meant Ni not TiSent from my SM-G935V using The Vapor Talk mobile app Link to comment Share on other sites More sharing options...
hicksvilleshick Posted September 18, 2016 Share Posted September 18, 2016 Well what kind of wire is in the coil you're using? If it's nickel you use ni mode, if it's titanium use ti mode, if it's stainless steel use ss mode. Now if they are just kanthal coils which most are, use wattage mode. Link to comment Share on other sites More sharing options...
Edna Posted September 18, 2016 Share Posted September 18, 2016 9 hours ago, Lori s said: Thank you.i put the .05ohm coil in, but is it TI the one I use to set it on? Sent from my SM-G935V using The Vapor Talk mobile app Oops I meant Ni not Ti Sent from my SM-G935V using The Vapor Talk mobile app I think that the 0.5 is stainless you might want to check the manual on that though. If that's the case set it to Stainless. You set it to whatever metal the coils is made of. (I use the 0.3 ohm coils in wattage or the rebuildable coils... so sorry I can't be more specific.) Link to comment Share on other sites More sharing options...
FXRich Posted September 18, 2016 Share Posted September 18, 2016 (edited) You didn't mention what kind of tank you are using, if we knew that we could be more helpful. different tanks use different coils. I have to assume you are using the melo tank. .5 Ti coils are available for the melo 3 mini tank. Edited September 18, 2016 by FXRich Link to comment Share on other sites More sharing options...
spydre Posted September 19, 2016 Share Posted September 19, 2016 You can also set Stainless steel on wattage mode, if you prefer to use wattage. Right now, that's what I'm doing - but a second juice that I vape I may end up vaping in TC mode. Thank goodness I have a mod that I can use SS in. Just remember, if you have a Nickle or Titanium coil, you can't use them in wattage mode. That's why stainless steel is so handy. Edna 1 Link to comment Share on other sites More sharing options...
trimbowl Posted September 26, 2016 Share Posted September 26, 2016 If I vape in wattage mode what watts should I set my wisemec rx75 with a triton tank.4Sent from my LGL39C using The Vapor Talk mobile app Link to comment Share on other sites More sharing options...
smacksy Posted September 26, 2016 Share Posted September 26, 2016 If I vape in wattage mode what watts should I set my wisemec rx75 with a triton tank.4Sent from my LGL39C using The Vapor Talk mobile appI believe 25-30w as stated on a another forum...don't know for sure..lolSent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
trimbowl Posted September 26, 2016 Share Posted September 26, 2016 I get a burnt taste when I set it at 25wSent from my LGL39C using The Vapor Talk mobile app Link to comment Share on other sites More sharing options...
smacksy Posted September 26, 2016 Share Posted September 26, 2016 Then turn it down..I'd start low and bump it up to find your sweet spot, after all, you're the one vaping it.. I do the same thing...lolSent from my XT1585 using Tapatalk Link to comment Share on other sites More sharing options...
Earthling789 Posted September 26, 2016 Share Posted September 26, 2016 23 minutes ago, trimbowl said: If I vape in wattage mode what watts should I set my wisemec rx75 with a Triton tank.4 Sent from my LGL39C using The Vapor Talk mobile app I'll assume you're using the 316L SS coils since you listed 0.4 Ohms... But, like all coils (and juice), vaping is subjective to YOUR tastes, so I would recommend starting at a lower Wattage, say 15W... vape, bump up the power in 0.5W increments until it tastes better, and once you get a burnt taste, back off 0.5W... then you can fine-tune it in 0.1W increments (up or down) until you find what works best for the juice you are using. All juices will vape differently in different tanks and coil combos... what works great at 20W in a Triton with 0.4 Ohm SS coil may need only 16W in a Subtank mini with a 0.5 Ohm SS coil... or it may need 24W? It's all subjective to your tastes and the juice, so start low and use the trial-and-error approach. BTW, usually once you burn your cotton, the flavor of "burnt" may never go away until you change the coil, dump the juice, and clean the tank smacksy 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now