Vaporesso ceramic coils

[3lawy]

Hi

I have:

-Joyetech CUBOID 150W Mod.
-Vaporesso gemini tank.

I want to know the settings for this coil: 

- vaporesso Ccell ceramic coil ss 0.5 ohm

And this coil:

- vaporesso Ccell ceramic coil Ni200 0.2 ohm

[Squid]

You have a few options for settings. The ss coil can be run in wattage or TC mode. The Ni200 coil can only be run in TC mode on the Ni setting.

As far as wattage/ temp settings, your best bet is to start low and slowly increase either the wattage or the temp (if in TC mode) until you get the vape you want. The settings can also depend on the juice you are using. High PG or nic will usually have you at a lower wattage setting that a higher VG juice, or one with less nic.  For the ss coil, maybe start around 10 watts in wattage mode, and slowly work your way up. if you get a harsh/burnt taste back off .5 watts or so and you have found the "magic spot" for that coil/juice combo.