Foofightervapegirl Posted July 25, 2016 Share Posted July 25, 2016 (edited) Well,this has happened to me quite a few times,so I thought I'd leave it here just in case someone needs it.you've just filled your nebox tank,and you get a reading of 9.99 ohms.take the coil out,hit the fire button once,replace your coil,hit the fire button once,it should read old load-,new load+,choose new load,if this does not work,put in a fresh coil,and it should show the same after hitting the fire button once,it sometimes does it automatically. I figured this out on my own,lol.Hopefully, none of you ever have this issue,but if you do there ya go.happy vaping! Edited July 25, 2016 by Foofightervapegirl Spelling error Link to comment Share on other sites More sharing options...
FXRich Posted July 25, 2016 Share Posted July 25, 2016 I don't have a Nebox, but when I get a 9.99 reading it means I have to pull the center pin on the mod up or there is something wrong with the coil. I have noticed on the Kanger mods if there is only a 0.01 ohm difference between the old coil and the new coil it will not ask if its a new coil, so what I have got in the habit of doing is before I put on the tank, I hold the fire button until it flashes 9.99, then it will ask if its a new coil. basically what I do is clear the old reading. Link to comment Share on other sites More sharing options...
Foofightervapegirl Posted July 25, 2016 Author Share Posted July 25, 2016 The nebox has a built in tank,so there's no removing it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now