Mozke Posted April 7, 2016 Share Posted April 7, 2016 I just got a rx200 kit with batteries they are lg he2. Are these gunna be OK or should I buy different batteries I vape between 45-60w Link to comment Share on other sites More sharing options...
jasonculp Posted April 7, 2016 Share Posted April 7, 2016 1 hour ago, Mozke said: I just got a rx200 kit with batteries they are lg he2. Are these gunna be OK or should I buy different batteries I vape between 45-60w Those batteries will work great at the power you are using it at. Personally with a good 20watt battery (which the HE2s are, I would keep it below 150 watts or so, and it will be very safe, no matter how low you go on the build. I am being a bit conservative by like to err on the side of safety. At 45 - 60 watts the he2 will not be the longest lasting battery. I would pickup another set of HG2s or Samsung 30Qs to keep charged while you use the other set. It is really nice not to have to wait for a set to charge. Mozke 1 Link to comment Share on other sites More sharing options...
Earthling789 Posted April 7, 2016 Share Posted April 7, 2016 I agree with Jason... Those batteries will be great for the Wattage you're using. I'd not push them (together) above 150W. I personally run a few of my single-18650 MOD's up to 50W with the LG HE2 batteries and have zero issues with them. They are great batteries. Jason's other suggestions for spares (LG HG2 or Samsung 30Q) are spot-on. You should have at least one spare set to charge while another set is in use, and it wouldn't bet a bad idea to pick up six (two sets for spare). Be sure to label them with a sharpie so you know which batteries you have mated together. I use alphabetical... A, B, C, etc. for those used in single mods... A1, A2, B1, B2, etc for dual-mods... this way I can keep track of not only mated sets, but also their position in the MOD, so I can rotate their position each time I change batteries.... 1-2-3, 3-1-2, 2-3-1, and back to start-position, but I"m OCD that way... or as my family tells me... CDO (alphabetical, as it should be, lol). Mozke and jasonculp 2 Link to comment Share on other sites More sharing options...
Mozke Posted April 7, 2016 Author Share Posted April 7, 2016 Thank you Jason and earthling for your response I really appreciate the info I will take the advice and buy a set of hg2 once again thankyou Link to comment Share on other sites More sharing options...
hicksvilleshick Posted April 7, 2016 Share Posted April 7, 2016 I currently run the hg2's on my rx 200 with no issues. I think you'll be fine, iirc those are 20a so you should be well covered. Link to comment Share on other sites More sharing options...
shen_long86 Posted April 10, 2016 Share Posted April 10, 2016 I agree with jason as well...i run a set of LG HG2'S in my rx 200, they are 3,000 mah and 20A so your good on battery life and the 20 amps will cover you for low builds. I have run mine as low as 0.13 ohms with zero issues. Sent from my SAMSUNG-SM-G928A using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now