Kendra Posted March 27, 2016 Author Share Posted March 27, 2016 OK, I think you all have convinced to try that as my second one. I seem to be happy with 2 flavors right now. Although, I have about 12, with all the other decisions I have to make regarding equipment. Juices favors can wait! Off to research the "RBA" coils...have seen this coming up a lot in me reading but not sure what it is. Thanks again everyone! Link to comment Share on other sites More sharing options...
Tam Posted March 27, 2016 Share Posted March 27, 2016 Kendra, you're not quite ready for an RBA, that stands for Rebuildable Atomizer. Before you get to the point of building your own coils, you need to master using the prebuilt ones first. Learn to walk before trying to pilot a jet. Kendra 1 Link to comment Share on other sites More sharing options...
hicksvilleshick Posted March 28, 2016 Share Posted March 28, 2016 Subtank mini's are good tanks. Our kbox came with one. Ol lady still uses it. Plenty of coil options but the ol lady was less than impressed with the Claptons. Don't worry about a rba low Tam says, unless you are intent on getting into building your own coils. Link to comment Share on other sites More sharing options...
FXRich Posted March 28, 2016 Share Posted March 28, 2016 I was not impressed with the Clapton coil in the Subtank mini either. The only reason I mentioned the RBA is because that is what I use, I have to agree with some people on here that prefer the 1.2 ohm horizontal coil because it gives better flavor and plenty of vapor and is not subohm. Also you can usually get the 1.2 horizontal coils cheaper than the vertical coils. Link to comment Share on other sites More sharing options...
Kendra Posted March 28, 2016 Author Share Posted March 28, 2016 2 hours ago, Tam said: Kendra, you're not quite ready for an RBA, that stands for Rebuildable Atomizer. Before you get to the point of building your own coils, you need to master using the prebuilt ones first. Learn to walk before trying to pilot a jet. Yes! As soon as I realized what it stood fire it was out if my mind! No where near ready for that! OK, so it seems they are out of stock on the Aerotank v2... figures! This has been two days ongoing! I need to place this order! Link to comment Share on other sites More sharing options...
Tam Posted March 28, 2016 Share Posted March 28, 2016 https://www.vaportalkstore.com/shop/kanger-aerotank-v2/ Kanger Aerotank V2 from our own Vapor Talk store. Kendra 1 Link to comment Share on other sites More sharing options...
Kendra Posted March 28, 2016 Author Share Posted March 28, 2016 14 minutes ago, Tam said: https://www.vaportalkstore.com/shop/kanger-aerotank-v2/ Kanger Aerotank V2 from our own Vapor Talk store. Oh! Look at that! Thank you, I'm am ordering now before this consumes anymore of my time! Link to comment Share on other sites More sharing options...
Tam Posted March 28, 2016 Share Posted March 28, 2016 Don't forget to get replacement coils! Kendra 1 Link to comment Share on other sites More sharing options...
Kendra Posted March 28, 2016 Author Share Posted March 28, 2016 (edited) 1 hour ago, Tam said: Don't forget to get replacement coils! Thank you! Order is placed, including 12 replacement coils. Since they didn't have the Aerotank v2 in stock and for some reason I am just not feeling comfortable with the idea of the Subtank mini yet, I opted for adding on the genitank. Not sure if this was a smart choice, but it was a cheaper option for the moment and will hold me over in case my Aerotank v2 from vaportalk happens to come in after my Istick order. The Subtank mini will definitely be my next purchase. I just want to feel out my new device first. I'm sure there is nothing difficult about it. My brain is just on info overload right now and the description threw a lot at me 😁 Thanks again, everyone, for all your help and advice! Can't wait to get my new setup!! Edited March 28, 2016 by Kendra Link to comment Share on other sites More sharing options...
hicksvilleshick Posted March 29, 2016 Share Posted March 29, 2016 Don't forget to prime your coils when you're putting your tank together! There's no shortage of youtube vids on how to prime the coils, and it is key! (otherwise you'll burn the coil up) It's also wise to do a few pulls on the tank without hitting the fire button and to let the tank sit a few min once you've got juice in it. You want the juice to wick as well as you can get it to. Kendra 1 Link to comment Share on other sites More sharing options...
Kendra Posted March 31, 2016 Author Share Posted March 31, 2016 On 3/29/2016 at 2:38 AM, hicksvilleshick said: Don't forget to prime your coils when you're putting your tank together! There's no shortage of youtube vids on how to prime the coils, and it is key! (otherwise you'll burn the coil up) It's also wise to do a few pulls on the tank without hitting the fire button and to let the tank sit a few min once you've got juice in it. You want the juice to wick as well as you can get it to. Thank you!! Link to comment Share on other sites More sharing options...
Kendra Posted March 31, 2016 Author Share Posted March 31, 2016 Left for work at 6:30am and didn't get home until 9:30...but my package has arrived! After 13 hrs at work, I came home to my new vape set up! Thanks to all your great advice I am one happy vaper! Didn't get my aerotank yet, but the genitank should hold me over just fine. Thanks again everyone, for your help! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now