vinotoscano0827 Posted March 3, 2016 Share Posted March 3, 2016 Hello, I recently bought a Goliath RDA which, to my surprise, did not fire up. In fact, my Mod (150w Cuboid) reads "no atomizer found". Does anybody know how I could fix this? Cheers! Link to comment Share on other sites More sharing options...
Compenstine Posted March 3, 2016 Share Posted March 3, 2016 Can you post a better image... Looks as though there is no coil so yes it would read "No Atomizer Found". shen_long86 1 Link to comment Share on other sites More sharing options...
vinotoscano0827 Posted March 3, 2016 Author Share Posted March 3, 2016 Sorry about that. It has coils, 24gauge Titanium. Link to comment Share on other sites More sharing options...
Bebop Posted March 3, 2016 Share Posted March 3, 2016 Any chance you could do a clearer picture in focus? Its not good enough to diagnose. Very hard to see actual connections. It looks like it should be one leg up, one leg down like this build. shen_long86 1 Link to comment Share on other sites More sharing options...
Compenstine Posted March 3, 2016 Share Posted March 3, 2016 Having a clear image would help, but from what I see, what you have is direct sort of every coil. Facing coil looks to be hooked to both top Pos (+) terminals Right side coil is hooked to both bottom Neg (-) termanals Left side coil is hooked into the Pos (+) at the top on the screw and the bottom is hooked to the Neg (-) pole? I can not tell for sure. The coil in the back I can't tell how it is hooked in. Each coil needs a Pos (+) and Neg (-) connection to complete the circuit. With out that, or doing it with one and not the rest is a broken circuit and Direct sort circuit and if it were not a regulated Mod, a face bomb. shen_long86 1 Link to comment Share on other sites More sharing options...
vinotoscano0827 Posted March 3, 2016 Author Share Posted March 3, 2016 Ill give it a try. Thanks guys! And yeah sorry, I'm using a crappy phone, I will try again. Link to comment Share on other sites More sharing options...
vinotoscano0827 Posted March 3, 2016 Author Share Posted March 3, 2016 Thanks guys. Although I now feel extremely stupid, I'm happy this got resolved. I placed one end of the coil on the lower level and the other on the upper level. Thanks for all the help. Cheers! Link to comment Share on other sites More sharing options...
Bebop Posted March 3, 2016 Share Posted March 3, 2016 Good. straighten out those coils, measure their resistance and make sure it's safe before you go too crazy with it. Good luck. Do not blow yourself up!!!! vinotoscano0827, Tam and shen_long86 3 Link to comment Share on other sites More sharing options...
Tam Posted March 4, 2016 Share Posted March 4, 2016 What resistance is your ohm meter reading on this coil? Just curious... shen_long86 and Bebop 2 Link to comment Share on other sites More sharing options...
shen_long86 Posted March 4, 2016 Share Posted March 4, 2016 I agree with Tam...what is the resistance on this build. Also you do know that your not supposed to dry fire titanium like that, because it releases toxic chemicals. When i build titanium coils i always wash and dry the wire before building, but never dry fire. vinotoscano0827 1 Link to comment Share on other sites More sharing options...
vinotoscano0827 Posted March 4, 2016 Author Share Posted March 4, 2016 I don't have the thing on me. It read 1.27 approx Link to comment Share on other sites More sharing options...
FXRich Posted March 4, 2016 Share Posted March 4, 2016 I have read that dry firing titanium above 700f will cause titanium oxide to form on the coil, also read that titanium will ignite above a certain temp. Don't know if its true about igniting, but not willing to try it either. That's why I'm sticking to SS for temp control builds. Link to comment Share on other sites More sharing options...
GUNNY 68 Posted September 4, 2016 Share Posted September 4, 2016 WHAT DOES IT MEAN WHEN MY RX200S, SAYS,....atomizer short????................Thanks for any help............... Link to comment Share on other sites More sharing options...
GUNNY 68 Posted September 4, 2016 Share Posted September 4, 2016 36 minutes ago, GUNNY 68 said: . 36 minutes ago, GUNNY 68 said: WHAT DOES IT MEAN WHEN MY RX200S, SAYS,....atomizer short????................Thanks for any help............... I GOT IT WORKIN, SO I'M GOOD!!! THANKS ANYWAY.................... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now