J_V_5 Posted March 1, 2016 Share Posted March 1, 2016 I have the wismec rx200 and I have a Herakles sense plus tank on it, but I think I screwed it in too tightly and now I can't get it out. Help please Link to comment Share on other sites More sharing options...
cany Posted March 2, 2016 Share Posted March 2, 2016 Try grabbing the bottom section of the tank with something rubbery/gripy like one of those garlic peeling matts J_V_5 and Christopher 2 Link to comment Share on other sites More sharing options...
Tam Posted March 2, 2016 Share Posted March 2, 2016 Just in case you wind up unscrewing the wrong thing, I would turn the tank upside down so the juice won't spill all over the mod. Then, using Cany's suggestion, try using something rubbery for better grip to try to unscrew the tank off. If you don't have anything else, a rubber band wound around the base of the tank will also give you gripping power. jasonculp and J_V_5 2 Link to comment Share on other sites More sharing options...
Foofightervapegirl Posted July 29, 2016 Share Posted July 29, 2016 If the rubber does not work alone,and sometimes it didn't for me take the rubber,wrap it around so you don't damage your tank or mod,and grab some needlenose pliers or a very small monkey wrench.but be sure you put something under it so you don't damage it, then you'll really be in a fix!make sure you turn it upside down and you are grasping the bottom of the tank and not the mod itself or the glass.works everytime for me.good luck! Link to comment Share on other sites More sharing options...
smacksy Posted October 11, 2016 Share Posted October 11, 2016 I used a small pair of vise grips with the curved jaws before..just make sure not to overtighten them and be sure they lock on the base, not the air control ring...worked great! Good luckSent from my QTAQZ3 using Tapatalk Adversarious1 1 Link to comment Share on other sites More sharing options...
Christopher Posted October 16, 2016 Share Posted October 16, 2016 I hate when that happens, usually a pair of pliers will do the trick. Also make sure the tank has fully cooled down if you've been using it. (I find they got stuck most often after becoming hot) Also props for using the forum tag system correctly! Link to comment Share on other sites More sharing options...
cany Posted October 16, 2016 Share Posted October 16, 2016 @Christopher Maybe VT store could look into those little round rubber mats to help with tight tanks I received one with an order from somewhere took me months to figure out what it was lol Christopher 1 Link to comment Share on other sites More sharing options...
Christopher Posted October 16, 2016 Share Posted October 16, 2016 Great for opening jars too Link to comment Share on other sites More sharing options...
leadpipe58 Posted May 15, 2017 Share Posted May 15, 2017 I keep a 1" strap of leather on hand around a foot long. It will wrap around the stick idem and can be turned into a strap wrench. Works greatSent from my iPhone using The Vapor Talk mobile app Uncivil11 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now