Jump to content

Recommended Posts

Posted

I have the wismec rx200 and I have a Herakles sense plus tank on it, but I think I screwed it in too tightly and now I can't get it out. Help please

Posted

Just in case you wind up unscrewing the wrong thing, I would turn the tank upside down so the juice won't spill all over the mod. Then, using Cany's suggestion, try using something rubbery for better grip to try to unscrew the tank off. If you don't have anything else, a rubber band wound around the base of the tank will also give you gripping power.

  • 4 months later...
Posted

If the rubber does not work alone,and sometimes it didn't for me take the rubber,wrap it around so you don't damage your tank or mod,and grab some needlenose pliers or a very small monkey wrench.but be sure you put something under it so you don't damage it, then you'll really be in a fix!make sure you turn it upside down and you are grasping the bottom of the tank and not the mod itself or the glass.works everytime for me.good luck!

  • 2 months later...
Posted

I used a small pair of vise grips with the curved jaws before..just make sure not to overtighten them and be sure they lock on the base, not the air control ring...worked great! Good luck

Sent from my QTAQZ3 using Tapatalk

Posted

I hate when that happens, usually a pair of pliers will do the trick. Also make sure the tank has fully cooled down if you've been using it. (I find they got stuck most often after becoming hot) 

Also props for using the forum tag system correctly! ;)

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

Terms of Use Privacy Policy Guidelines