arossi2462 Posted February 16, 2016 Share Posted February 16, 2016 Looking for a mech mod set at 75 or 80 watts. Any ideas? Link to comment Share on other sites More sharing options...
Earthling789 Posted February 16, 2016 Share Posted February 16, 2016 Welcome to Vapor Talk... There is no such thing as a Mechanical "set" at any Wattage... Wattage is determined by Ohm's Law... power of your battery (Voltage) and the resistance of your coil (Ohms). To hit 80 Watts, you need 3.7V and a coil built to 0.17 Ohms... or 4.1V and a coil built to 0.21 Ohms. A MECHanical MOD is like a flashlight... ON or OFF... and it uses the full (available) power of the battery to energize the coil. Link to comment Share on other sites More sharing options...
FXRich Posted February 17, 2016 Share Posted February 17, 2016 A mech mod with a single 18650 battery will draw about 20 amps at 80 watts, so if you don't use a good 20A battery you may become a statistic. A 26650 battery has a higher amp ratting. Either way you would be much better off at 80 watts with a regulated mod. Most of the time someone blows themselves up is with a mech mod with too low of a coil resistance or a low amp drain battery. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now