Crimus Posted December 20, 2009 Share Posted December 20, 2009 (edited) I think it might be the batteries, as I've been having the same problem. My batteries are already shot I think, as I get maybe 1.5 hours out of one and maybe 30-45 minutes out of the other. I just ordered 6 more, so we'll see. My spade is hitting fine with the battery thats still getting 1.5 hours for a while, but dwindles fairly fast. I'm finding myself going back to my 510 batteries pretty often now. The above pretty much describes my situation with my spade that I just got yesterday bang on, only difference being since this is my first ecig, I have nothing to compare it to or other models to swap parts with. I charged each battery for 8 hours. Super dissapointed. Got mine from Dietsmokes. Edited December 20, 2009 by Crimus Link to comment Share on other sites More sharing options...
nana Posted December 20, 2009 Share Posted December 20, 2009 Crimus, get in touch with Jeso at VaprLife. He'll take care of you. He's an awesome guy. Link to comment Share on other sites More sharing options...
Travis798 Posted December 20, 2009 Share Posted December 20, 2009 The above pretty much describes my situation with my spade that I just got yesterday bang on, only difference being since this is my first ecig, I have nothing to compare it to or other models to swap parts with. I charged each battery for 8 hours. Super dissapointed. Got mine from Dietsmokes. No need to charge the batteries for 8 hours. They come pretty much completely charged. The first charge on my spade the batteries didn't seem to last all that long. After subsequent charges they were fine. It really doesn't make sense, since lithium ion batteries don't require a primer charge or have a charging memory, but other people have stated the same thing. If you're batteries are still giving you problems after a charge or two, I'm sure you can get the batteries replaced. The charger that comes with them can be a little bit tricky though. Make sure they have good contact when you charge them to insure you are getting a full charge. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 (edited) I cleaned everything with an eraser and the batteries still don't last long. They drain fast and when they get low the light flickers and sometimes the light doesn't come on until I push the button harder. It may just be the warmth of my hand or just in my head but it seems the Spade gets slightly warm when I try to chain vape it. I have three atties and they all performing well on my 510 but the Spade isn't performing near as well with any of them. There is either something wrong with the charger, batteries, or ,hopefully not, the Spade. What should I do now? edit: The batteries charge up fast sometimes when I put it on the charger, so maybe they are not draining. Edited December 21, 2009 by Schizophretard Link to comment Share on other sites More sharing options...
nana Posted December 21, 2009 Share Posted December 21, 2009 This sounds so much like the problem I was having. Except my batteries didn't charge fast. I really think you should contact Jeso. Since he's the one who makes them, he knows what to do about it. He's a great guy and will take care of you. Link to comment Share on other sites More sharing options...
Travis798 Posted December 21, 2009 Share Posted December 21, 2009 My batteries don't last either. I've had a time or two that I've pressed the button and nothing, have to press it a little harder to get anything but it's not common yet, hopefully it doesn't become a problem. I'm in the same boat as you Schizophretard. My batteries charge up quickly and die quickly, so I'm assuming either the charger is faulty or the batteries are already full of dead cells. When I get my new batteries I should know for sure. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 Sometimes I do drain them and they take awhile to charge but sometimes I just think they drained because of the bad performance and flickering light but I'll put them back on the charger and in about 10 mins the light is green again. Right now I'm just using my 510 because it is performing way better. It is hard to get my atty hot and require a cool down on the Spade but I can do it in 5 mins with my 510. If the situation requires me to send it back for repairs or an exchange then I want to solve the problem with the least amount of cost to Parked and Jeso. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 My batteries don't last either. I've had a time or two that I've pressed the button and nothing, have to press it a little harder to get anything but it's not common yet, hopefully it doesn't become a problem. I'm in the same boat as you Schizophretard. My batteries charge up quickly and die quickly, so I'm assuming either the charger is faulty or the batteries are already full of dead cells. When I get my new batteries I should know for sure. Please keep me updated. If buying a better charger and some more batteries will solve the problem then I rather do that then exchange a perfectly good Spade. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 This sounds so much like the problem I was having. Except my batteries didn't charge fast. I really think you should contact Jeso. Since he's the one who makes them, he knows what to do about it. He's a great guy and will take care of you. I just emailed him. Link to comment Share on other sites More sharing options...
VAPRLIFE Posted December 21, 2009 Share Posted December 21, 2009 I just emailed him. Hi, If the LED is flickering or dimming, then there is a connection problem. The cap has to be screwed on tight, because the end of the cap (stainless steel) must conduct to the edge of the aluminum body. If the unit still has a problem, contact where you purchased for a RMA# to have sent to us and we will investigate whats wrong. We want your spade to perform like it should. Best Regards jeso Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 Thanks for the fast response! It is always screwed on tight. RMA#? I purchased it from dietsmokes.com. Link to comment Share on other sites More sharing options...
VAPRLIFE Posted December 21, 2009 Share Posted December 21, 2009 Thanks for the fast response! It is always screwed on tight. RMA#? I purchased it from dietsmokes.com. Hi, RMA (return material authorization number) is needed from dietsmokes. Best regards Jeso Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 I requested the number. Do I email it to you? Link to comment Share on other sites More sharing options...
VAPRLIFE Posted December 21, 2009 Share Posted December 21, 2009 I requested the number. Do I email it to you? Hi, Yes email number to Vaprlife, and then you can send back to us under warranty. Best Regards Jeso Link to comment Share on other sites More sharing options...
Jeffb Posted December 21, 2009 Share Posted December 21, 2009 Sorry this is off topic: First off I want to say I've never met Jeso or purchased anything from him. I am very impressed with the customer service that was shown here. It's that kind of hands on customer service that I look for in a supplier. Maybe there's a VP2 in my future. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 21, 2009 Author Share Posted December 21, 2009 I'm very happy with the customer service also. I plan on owning the compete VP series some time after Christmas. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 23, 2009 Author Share Posted December 23, 2009 I asked for the RMA# from Parked but instead I read in my email that he shipped me something that weighs a pound. I wonder if it is a box to ship the Spade with instructions what to do(Sony did that with my PS3), an atty, or something. Does anyone that has done business with Parked have any idea what he shipped? I trust that he is doing the right thing but I'm curious about what is going on. I haven't done much business online, so I don't know how this all works. Link to comment Share on other sites More sharing options...
Christopher Posted December 23, 2009 Share Posted December 23, 2009 I asked for the RMA# from Parked but instead I read in my email that he shipped me something that weighs a pound. I wonder if it is a box to ship the Spade with instructions what to do(Sony did that with my PS3), an atty, or something. Does anyone that has done business with Parked have any idea what he shipped? I trust that he is doing the right thing but I'm curious about what is going on. I haven't done much business online, so I don't know how this all works. This doesn't usually happen. He may send out a replacement and ask you to send the broken unit back. Most suppliers will ask you send the unit back, once they have the unit they will repair it or send out a new unit if all else fails. Parker also normally responds to you before sending something out, check your junk folder. Link to comment Share on other sites More sharing options...
Schizophretard Posted December 23, 2009 Author Share Posted December 23, 2009 Unless he wants to help me get my penis larger I don't think any of the emails in my junk folder are from him. Wait a minute! Are you saying he may have shipped me a new Spade before I sent the old one back? Link to comment Share on other sites More sharing options...
Schizophretard Posted December 24, 2009 Author Share Posted December 24, 2009 HE SENT ME A NEW SPADE! YAY! YAY! WOOT! WOOT! YEAH! YEAH! Link to comment Share on other sites More sharing options...
Christopher Posted December 24, 2009 Share Posted December 24, 2009 Awesome, I hope you update and everything works out for ya. Give credit where it's due! Link to comment Share on other sites More sharing options...
Schizophretard Posted December 24, 2009 Author Share Posted December 24, 2009 I'll give more than credit!!! Link to comment Share on other sites More sharing options...
VapnRealtor Posted December 25, 2009 Share Posted December 25, 2009 I don't own a Spade but I have 3 VP2's from Jeso and Mary and one thing you can all expect is to be taken care of 150%. I've had minor only issues and I gotta say they are on the ball,fast with responses and will make certain you have a product that performs as it should. They have both IMO gone over and above the level of customer service I expected. That being said I'd be willing to bet most of any problems that do arise with their products are probably associated with the rechargable batteries. The QC on all of them seems weak and there are alot of defects with all of the battery models it seems. You should always make sure you have a good supply in backup cause they can go bad in the blink of an eye. Derek Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now