Video Diy A 5 Volt Detonator

[Robert]

Ok First off I want to say thanks to Maddog for making the first DIY Magnum Video. I have changed his Magnum into the 5 Volt Detonator.

The Detonator

5 Volts is the "Sweet Spot"

Can anyone repost these embeded?

Problems - I try to use that giant spring to attach the cb outer ring (NEG) to the lip inside the FL- Bad idea! Later I remover the spring. Now I always drill the body and run a wire from the outer ring on cb to the hole in body and solder to the body= Permanent ground. Also the NEG from the cb should just sit on the lip inside the fl and connect ground that way.

Soon I will make a better DIY Video with the LED's explained.

For those that have been waiting here you go-

Intro was cut a little short

Part 1- http://www.youtube.com/watch?v=v8w7JBdQPik

Part 2- http://www.youtube.com/watch?v=Y2kv_sHl99c

Part 3- http://www.youtube.com/watch?v=r_1StfyS40s

Part 4- http://www.youtube.com/watch?v=bqRs46TYeLo

Part 5- http://www.youtube.com/watch?v=I1OWmOVpL0k

Contact: Detonatorecig@yahoo.com

Edited December 15, 2009 by Robert

[Robert]

[GDub]

Great tutorial, and I'd like to say I appreciated the impromptu Peter Gabriel in the 3rd video, that song gets stuck in my head too!

[Robert]

lol There will be more singing in the next vid!

[mcquinn]

I have found 4 volts to be my sweet spot.Doesn't melt the poly in carts or burn the liquid.But thats just me.

[Robert]

I have found 4 volts to be my sweet spot.Doesn't melt the poly in carts or burn the liquid.But thats just me.

A good new fully charged 510 battery can be 4.2 volts but they quickly drop to 3.7 for most of the time in use.

....................

btw- The new video is done but uploading very slowly ( in parts under 10 min each- still slow!)but part 1 is on my you channel now

....................

Contact detonatorecig@yahoo.com