ronald34dollar Posted October 1, 2015 Share Posted October 1, 2015 So I just Bought 2 Joyetech Evic Vt's and I seem to be having the most trouble out of them. The first day was great, had great hits and taste and everything was good, after i refilled the liquid it hasnt been the same since, idk what the deal is. I have bought several more atomizers, cleaned the tank, and still seems to not work as well... the first few hits are great but then they seem to taper off and become dry and dont have much flavor. what can I do? Ik that I shouldnt be replacing atomizers this often and I have watched tutorials and read articles... there has to be something missing.. plz help me !! Link to comment Share on other sites More sharing options...
Jeffb Posted October 1, 2015 Share Posted October 1, 2015 I switched from TC mode to VW. It seems to work better for me. Ive had my EVIC for a few weeks now and only changed the coil once. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 1, 2015 Author Share Posted October 1, 2015 It was recommended by the clerk to not. Currently I'm using a ti coil, 500°F at 39 watts, what other settings should I use or try with this current coil? I also have Ni coils but wanna get this down before I mess another coil up. ;/ Also sounds silly but if somebody could literally walk me through the right process of changing attys, cleaning, and refilling so I'm not doing it wrong I would greatly appreciate it Link to comment Share on other sites More sharing options...
Jeffb Posted October 1, 2015 Share Posted October 1, 2015 Do you know why the clerk recommended not switching to VW mode? That doesn't make any sense. Changing the atty is pretty simple and straight forward. Unscrew the old one and screw the new one in. Make sure and put a few drops of ejuice in the atty. I just run warm water in my tank to clean it out. Make sure and keep the connection on the mod itself clean. I just use tissues. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 1, 2015 Author Share Posted October 1, 2015 Not sure but another customer recommended the same thing you said.. Lol.. What settings and could are you using ? What I'm using and settings ATM Link to comment Share on other sites More sharing options...
Jeffb Posted October 1, 2015 Share Posted October 1, 2015 You will need to press the button 4 times to switch to VW mode. You can tell when its in VW mode because the watts will be at the top. I usually keep it around 20W. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 1, 2015 Author Share Posted October 1, 2015 On what type of coil ? And you don't burn your atty or anything? Also when you refill do you change anything or just keep it the same ? Anything I should do differently to save my attys so I'm not using them up as fast ? Link to comment Share on other sites More sharing options...
Jeffb Posted October 1, 2015 Share Posted October 1, 2015 I'm using the Ni .20 coils. I usually turn the wattage down at first, around 15 watts then work my way up. My wife has one also and she keeps hers around 12-13 watts. Its a matter of preference. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 1, 2015 Author Share Posted October 1, 2015 Look about right ? Link to comment Share on other sites More sharing options...
Jeffb Posted October 1, 2015 Share Posted October 1, 2015 Yes, thats it Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 1, 2015 Author Share Posted October 1, 2015 Thnx so much for all your help.. I will say I just switched to power mode with a titanium coil.. Settings at 20w, and it started tasting bad.. Idk.. Is there a way to get more juice to your atty ? I think that maybe part of my problem also. ;/ Link to comment Share on other sites More sharing options...
Jeffb Posted October 1, 2015 Share Posted October 1, 2015 What ratio is your juice? Is it a high VG content? I use a higher PG juice which tends to wick better in tanks IMHO. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 1, 2015 Author Share Posted October 1, 2015 6mg 100% VG Link to comment Share on other sites More sharing options...
Compenstine Posted October 1, 2015 Share Posted October 1, 2015 High VG has never been a good tank juice. It just don't wick well. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 2, 2015 Author Share Posted October 2, 2015 Any suggestions on what I should use ? I was under the impression that the others are not thick enough. ;/ Link to comment Share on other sites More sharing options...
Compenstine Posted October 2, 2015 Share Posted October 2, 2015 The highest vg I would recommend for tanks is 70% vg. VG gives the vapor. PG is the flavor carrier and Throat hit. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 2, 2015 Author Share Posted October 2, 2015 Awesome thanks.. Not sure if the vape shop I go to has specific percentages but I'll ask Link to comment Share on other sites More sharing options...
Compenstine Posted October 2, 2015 Share Posted October 2, 2015 Depending on the shop they should be able to mix that for you if they do mixing in house. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 2, 2015 Author Share Posted October 2, 2015 Ik another place that does.. 50/50 OK ? I was told that it would cause my tank to leak and what not so I didn't wanna try it. ;/ Link to comment Share on other sites More sharing options...
Jeffb Posted October 2, 2015 Share Posted October 2, 2015 I use a 70PG/30VG mix and have not had any tank leaking issues. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 2, 2015 Author Share Posted October 2, 2015 I'll make sure to ask and see.. This burning taste is getting really old though ;/ I have to be doing something wrong ;/ sad to say I miss my cheap ecig a little.. Lol my vision spinner was crap but atleast it worked. Lmao. Link to comment Share on other sites More sharing options...
Tam Posted October 2, 2015 Share Posted October 2, 2015 For several years I used 50/50 exclusively and never had any real problems with it leaking unless I did something stupid like not checking the coil to make sure it hadn't gotten loose. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 2, 2015 Author Share Posted October 2, 2015 Feel like I wasn't pulling juice as much as I should like I said earlier.. Stupid idea maybe.. I poked a hole in one of the attys side.. Seems to work a lot better.. lmao. I can post a pic ? Or maybe share video on snapchat idk. Link to comment Share on other sites More sharing options...
Squid Posted October 2, 2015 Share Posted October 2, 2015 Looks like an ego one tank, I have a mega, I run 60vg/40pg, no leaking issues. Link to comment Share on other sites More sharing options...
ronald34dollar Posted October 2, 2015 Author Share Posted October 2, 2015 It's the mega... After the whole I put in the atty I haven't had any issues.. No dry hits and flavor is better too.. No problems as of yet .. thnx for all the help Maybe I'll post an update in a few days if it continues to work as good as it is now Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now