Rixter Posted September 5, 2015 Share Posted September 5, 2015 (edited) If you had to pick just one setup (mod, juicer, tip, type of coil, battery, etc.) as your favorite, what would it be and why? It needs to be something that you own and use regularly.For me, it would be:Heatvape Invader Mini 50W TC mod (versatile and indestructible)eGo ONE clearomizer (small, adjustable draw, and never leaks or gurgles)Rebuildable CLR head with Ni200 coil & cotton wick (temp control and cheap to rebuild)Smok SS & Pyrex drip tip (never gets too hot)Efest IMR18650 2800mAh 35A battery (plenty of power and reliable)Like most serious vapers, I have a lot of vaping gear (understatement) that I really, really like for various reasons, but this would be what I would grab if I had to pick just one. Edited September 5, 2015 by Jeffb lazymorulz 1 Link to comment Share on other sites More sharing options...
Earthling789 Posted September 5, 2015 Share Posted September 5, 2015 Like you, I have lots of vape gear, but my daily go-to favorite is my Russian 91% and IPV-mini. There are many others I use and love, but side-by-side on the desk, and the Russian finds it's way into my hand Rixter 1 Link to comment Share on other sites More sharing options...
jasonculp Posted September 5, 2015 Share Posted September 5, 2015 (edited) Great question, but, it will change within a few months for me (I hope).For now:ipvD2Project Sub Ohm SauceCodeHerakels Ni200 coilSamsung INR18650-25RIt isn't the perfect setup though. RBA sucks on this one, I have messed up 2.I'm currently testing the TFV4 tank to replace the SauceCode, but it isn't looking like it will be the one.I am holding out for hope the ChutluV2. Edited September 5, 2015 by jasonculp Rixter 1 Link to comment Share on other sites More sharing options...
Tam Posted September 5, 2015 Share Posted September 5, 2015 Although I'm liking the Subtank mini and Russian 91% more and more, my all-time favorite is still theCustom Cisco Spec Hybrid HH.357 atomizer at 2.0 ohm, 100% PGCustom drip shield from Empire Mods2.5" stainless steel pipe style drip tipEleaf iStick 50WWith way too many toys to choose from, this is still my favorite, dependable set up. Rixter 1 Link to comment Share on other sites More sharing options...
Earthling789 Posted September 5, 2015 Share Posted September 5, 2015 Glad to hear you're liking that Russian more and more, Tam! I knew you'd enjoy it once you tried one Link to comment Share on other sites More sharing options...
Tam Posted September 5, 2015 Share Posted September 5, 2015 It just took awhile to get it dialed in... much like the subtank mini. Got a question for you, Earthling. On the last refill, I got lazy and didn't change the wick. Now, I'm finding I need to. Badly, lol. Anyway, can I do that even with a full tank of juice just like any other tank or is there something different I need to do? Link to comment Share on other sites More sharing options...
FXRich Posted September 5, 2015 Share Posted September 5, 2015 I guess what I'm using now is my favorite, but that might change later on.Kanger Subox mini with a Efest 3100mah 20A batteryKanger Subtank mini using the RBA with a 1.0 ohm kanthal 28g coil and a 3mm Ekowool hollow core wick (had to try it and surprisingly it wicks very well)3d printed drip tip (my own design)In a few hours I will probably switch to a KPT2 with a 1.8 coil, but what I'm using now is what I use most often. Rixter 1 Link to comment Share on other sites More sharing options...
Jeffb Posted September 5, 2015 Share Posted September 5, 2015 My Spinner with an Evod. I use it daily with no problems. Hassle free. FXRich and Rixter 2 Link to comment Share on other sites More sharing options...
FXRich Posted September 5, 2015 Share Posted September 5, 2015 ^^^WINNER^^^ Link to comment Share on other sites More sharing options...
bcartervol98 Posted September 5, 2015 Share Posted September 5, 2015 If you had to pick just one setup (mod, juicer, tip, type of coil, battery, etc.) as your favorite, what would it be and why? It needs to be something that you own and use regularly.For me, it would be:Heatvape Invader Mini 50W TC mod (versatile and indestructible)eGo ONE clearomizer (small, adjustable draw, and never leaks or gurgles)Rebuildable CLR head with Ni200 coil & cotton wick (temp control and cheap to rebuild)Smok SS & Pyrex drip tip (never gets too hot)Efest IMR18650 2800mAh 35A battery (plenty of power and reliable)Like most serious vapers, I have a lot of vaping gear (understatement) that I really, really like for various reasons, but this would be what I would grab if I had to pick just one.IStick 50w (battery life and has yet to fail me, second would be Spinner 2)Davide 3ml with 1.8ohm single KPT coil (No longer available in the configuration I like so I am nursing the 6 my wife and I share)Standard drip tip is my preference (I used to be averse to metal tips but now prefer them)Fuzion Vapor "Endless Summer" in 18mg (All I have vaped since for over 2 years)I still have tons of backups for backups but my Istick is the favorite battery I have ever had. I am a fairly basic guy! Rixter 1 Link to comment Share on other sites More sharing options...
cany Posted September 5, 2015 Share Posted September 5, 2015 I have no Faith in any of my setups Im sure its all just user error though Link to comment Share on other sites More sharing options...
Earthling789 Posted September 5, 2015 Share Posted September 5, 2015 It just took awhile to get it dialed in... much like the subtank mini. Got a question for you, Earthling. On the last refill, I got lazy and didn't change the wick. Now, I'm finding I need to. Badly, lol. Anyway, can I do that even with a full tank of juice just like any other tank or is there something different I need to do?Sorry, Tam, just like any other tank... once you break the seal, the chimney pulls from the top-cap and... mess... When I find I forgot to change the wick, I'll bump the Wattage +2 and keep going... it seems to work, at least with my juices, so you may give that a try before you have to dump the tank into a cup and make a mess. Link to comment Share on other sites More sharing options...
Tam Posted September 5, 2015 Share Posted September 5, 2015 Sorry, Tam, just like any other tank... once you break the seal, the chimney pulls from the top-cap and... mess... When I find I forgot to change the wick, I'll bump the Wattage +2 and keep going... it seems to work, at least with my juices, so you may give that a try before you have to dump the tank into a cup and make a mess.That's what I thought but was hoping there might be some trick... Okay, remove screw, insert syringe, take out as much juice as possible and then... let the mess begin! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now