halfcam79 Posted July 27, 2015 Share Posted July 27, 2015 Hello,I just picked this up Saturday, very well built. Anyway, When I started getting dry hits. I have changed my wicking from barley touching the deck to hear wicks. (Organic cotton balls by the way). The only solution I have found is to loosen the the top cap about every 3 vapes and you see the air bubbles rising to the top, which causes flooding sometimes. Does anyone have any suggestions?Thanks,Halfcam79 Link to comment Share on other sites More sharing options...
halfcam79 Posted July 27, 2015 Author Share Posted July 27, 2015 geez my spelling was horrible... wicking from barely touching the deck to heavy wicks. Link to comment Share on other sites More sharing options...
DragonGunner Posted July 27, 2015 Share Posted July 27, 2015 (edited) I made a post a while ago about wicking. Even though the wicking method I used was for the Lemo RTA, I'm certain that if you follow the guide it might work for you as well. Good luck and stick with it. It can only get better. Scroll down about 10 posts from to the post named "Kanger sub mini and you will find the guide there. Sorry I tried copying the link but for some odd reason I can't. Edited July 27, 2015 by DragonGunner Link to comment Share on other sites More sharing options...
halfcam79 Posted July 27, 2015 Author Share Posted July 27, 2015 Thank You Link to comment Share on other sites More sharing options...
Earthling789 Posted July 27, 2015 Share Posted July 27, 2015 The best way I've found to wick a Kayfun or Russian is to have the cotton slightly snug in the coil (should move freely with a little resistance) - has to have room to swell, and fan out the ends of the cotton and have them just barely touching the deck. You don't need to "pack" the deck, as this will cause dry-hits, but too loose on the deck creates flooding. Fanning the cotton out creates more surface area and better capillary action for wicking. Link to comment Share on other sites More sharing options...
halfcam79 Posted July 27, 2015 Author Share Posted July 27, 2015 Thanks for the tutorial DragonGunner and Earthling789. I will try it tonight! Link to comment Share on other sites More sharing options...
halfcam79 Posted July 27, 2015 Author Share Posted July 27, 2015 It works!!! Thank You both Earthling789 and DragonGunner 2 Link to comment Share on other sites More sharing options...
DragonGunner Posted July 28, 2015 Share Posted July 28, 2015 It works!!! Thank You bothI'm glad the little tutorial helped you out. I know all about the Russian 91%. It was my go to device for a long time. If you have the funds available I would suggest the Kanger subtank mini. It has a very similar build deck but the airflow is much better. The juice channels are larger and allow for heavier vg juices. In my opinion the flavor is just as good. You would not be disappointed. Many others would say the same. The Russian 91% is a top notch RTA but it has its limitations as I've just explained. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now