Noob2vaping Posted July 9, 2015 Share Posted July 9, 2015 I'm trying to find out what is the best setting to have my mod at with the drip tank I have. I'm using 24 ga wire, any advice? Link to comment Share on other sites More sharing options...
Tug Posted July 9, 2015 Share Posted July 9, 2015 Whatever works best for you is the best setting. Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 What mod ?and do you have a tank or a dripper? Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 i have an IPV Mini 2 & a dripper. It's a Mutation X V4 Link to comment Share on other sites More sharing options...
Tug Posted July 9, 2015 Share Posted July 9, 2015 Just play with the wattage,when it gets too hot or harsh back it down a tad and that will be your sweet spot Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 My mod goes to 70 watts. I wanted to know what gauge wire is best? Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Ok.What exact battery are you using? Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 This is it Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 It should be marked with an amp rating. It's not in your picture Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 35 amp Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Have you built coils before? Do you have a meter to read your coils?Are you intending to build dual coils or single coil in that Mutation? Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 Yes I've built coils. I don't have a meter. What kind of meter is it that you asked about? I have 2 coils in it. Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Ok. how many wraps of 24g on a 3mm gets you .5ohms? Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 I have 7 wraps of 24g 7/64th & I'm right around there Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Okay Back to your original question - are you asking for a power setting? What are you trying to achieve? Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 Anyway I'm new to dripping. I used to use an Aspire Atlantis tank. That's the reason I figured I'd try this forum, not to act like I know everything. I'm trying to achieve optimum vaping with my set up. My power setting right now is 50w 4.2v .3ohms Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Hey no worries at all. Sorry for all the questions. You're in new territory is all. Quite a difference between that and a dripper Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 Ya it is different. I wanted to get into dripping for a while now. I just wanted to know if I should use a different gauge of wire & if I did what power settings I should use. Also different amounts of wraps or bigger or smaller diameter or what types of juices I should look for compared to the ones I used to when I used a tank. Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Here's my advice:be safe 1st. Use a meter to measure your ohms on your builds. It will also help you to make consistent builds. Your dual coils need to be balanced or you won't get good performance.use an online calculator like steam-engine to plan your builds, size and ohmsstudy up on building. Do your research. There's plenty of good stuff on YouTube specifically for your Mutation and coils in general.what you like for a set up will depend on what you want. Flavor? Clouds? Longer battery life? More or less airflow? You're going to be experimenting to find what you like and it's also going to depend on your juice. The short answer is there is no best setting. It's not like the stock coils in an Atlantis tank. You have many more variables with a dripper.go to a local vape shop and get help from the guy who builds there, not the guy that works the register. is there something you don't like about your .5 ohm build now? What do you want different? Here's an example of a meter to use Link to comment Share on other sites More sharing options...
Noob2vaping Posted July 9, 2015 Author Share Posted July 9, 2015 I like how it's hitting, the clouds are good too. I'm not getting a whole lot of flavor, not from heat distortion. It draws so much better than a tank that's what I was going for. I'm just here for advice, tips & tricks. Bebop 1 Link to comment Share on other sites More sharing options...
Bebop Posted July 9, 2015 Share Posted July 9, 2015 Cool. welcome to VaporTalk. Look for a thread called "share your coil builds" the builders and the drippers hang out in that thread. Lots of pics. Lots of advice. Some crazy builds. Ask questions in there. It helps if you ask specific questions or if you are trying to solve specific problems. Tell em your a noob. Be yourself. Above all, have fun and enjoy the ride. Good luck. Tam 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now