DragonGunner Posted June 23, 2015 Share Posted June 23, 2015 Great job Bebop. I also reluctantly took out my best build to date and put in a new one. I did it so exact that my flask did not even detect a new coil. I'm so stoked because that .13 coil I had in there lasted quite a long time and performed great. Now I can continue to enjoy. You have no idea how pleased I am right at this moment with temp control. WOOHOOO!!! Link to comment Share on other sites More sharing options...
cany Posted June 24, 2015 Share Posted June 24, 2015 Question I rebuilt the coil again I have 6-7 wraps on it and Im still reading 0.10 ohm I thought more wraps the higher the ohms went Link to comment Share on other sites More sharing options...
Bebop Posted June 24, 2015 Author Share Posted June 24, 2015 You built a pretty good one according to steam-engine. 28g on 3mm at 7 wraps is exactly .10 ohms Link to comment Share on other sites More sharing options...
cany Posted June 24, 2015 Share Posted June 24, 2015 Bebop should more wraps give me a higher number? 1.0 Is what I had with 5 wraps after I got the over heating issue fixed Link to comment Share on other sites More sharing options...
Bebop Posted June 24, 2015 Author Share Posted June 24, 2015 It takes me 9 or 10 wraps to get .13 - .15 Link to comment Share on other sites More sharing options...
cany Posted June 28, 2015 Share Posted June 28, 2015 Ok did a 6 wrap 28ga NI got 0.14 had to get one of these http://comingsoon.radioshack.com/radioshack-led-helping-hands-with-magnifier/6400235.html#.VZA8dZzLKRF to see what I was doing Link to comment Share on other sites More sharing options...
cany Posted June 29, 2015 Share Posted June 29, 2015 My 1.4 is now down to 1.2 Link to comment Share on other sites More sharing options...
Bebop Posted June 29, 2015 Author Share Posted June 29, 2015 No worries. Mine do that too. There are subtle differences that can change the resistance ever so slightly. And at this level your talking hundredths of an ohm - very small amount. Link to comment Share on other sites More sharing options...
cany Posted June 29, 2015 Share Posted June 29, 2015 Thanks Bebop I get nervous when things change Link to comment Share on other sites More sharing options...
Bebop Posted June 29, 2015 Author Share Posted June 29, 2015 I hear ya. Had one creep down to .11 and I had to think twice about puttin it up to my mouth cuz I figure it's pretty close to turning in to a pipe bomb any lower than that. Haha Link to comment Share on other sites More sharing options...
cany Posted June 29, 2015 Share Posted June 29, 2015 I hear ya. Had one creep down to .11 and I had to think twice about puttin it up to my mouth cuz I figure it's pretty close to turning in to a pipe bomb any lower than that. Haha Well now Im glad this invader built like a brick chit house lol Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 Can you guys post some close pics of the NI coils you have built on the sub mini Link to comment Share on other sites More sharing options...
Bebop Posted July 4, 2015 Author Share Posted July 4, 2015 Sure cany, I will in a while Link to comment Share on other sites More sharing options...
Bebop Posted July 4, 2015 Author Share Posted July 4, 2015 This is a 3mm diameter coil 10 wraps . coning out .15 ohms jasonculp and Rixter 2 Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 Bebop how many wraps is that Link to comment Share on other sites More sharing options...
Bebop Posted July 4, 2015 Author Share Posted July 4, 2015 10 full wraps. (Maybe 11. I sometimes do that. ) Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 Im doing something horribly wrong I could never get that many wraps Link to comment Share on other sites More sharing options...
jasonculp Posted July 4, 2015 Share Posted July 4, 2015 Im doing something horribly wrong I could never get that many wrapsI don't think you are doing anything wrong. I find it terribly difficult to build a 10 wrap coil in the SubTank Mini. Mine have been less wraps. I have a hard time hitting .1 ohm. This is why I have changed to the SauceCode. It isn't much better, but it is better (to build on). I wish someone would build something with a Lemo (sized) deck, better airflow, and top fill. So far I can't find it. I really don't want to go to the dual coils because it is twice the trouble (or at least you have to make the coils twice as big). Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 Whats wrong with this picture? Link to comment Share on other sites More sharing options...
Bebop Posted July 4, 2015 Author Share Posted July 4, 2015 How big is that coil. I can see its seven wraps but what did you use to wrap it? maybe a little cotton heavy Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 A 3mm screw driver Link to comment Share on other sites More sharing options...
Bebop Posted July 4, 2015 Author Share Posted July 4, 2015 7 wraps is not enough. 10 minimum Link to comment Share on other sites More sharing options...
Rixter Posted July 4, 2015 Share Posted July 4, 2015 What kind of wire are you using and what gauge is it? Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 (edited) I I try 10 wraps my spacing is real close and I have to bend the legs to get them too attachthat mess shows .13 at room temp Thats a 2nd dry fire Edited July 4, 2015 by cany Link to comment Share on other sites More sharing options...
cany Posted July 4, 2015 Share Posted July 4, 2015 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now