DragonGunner Posted June 23, 2015 Posted June 23, 2015 Great job Bebop. I also reluctantly took out my best build to date and put in a new one. I did it so exact that my flask did not even detect a new coil. I'm so stoked because that .13 coil I had in there lasted quite a long time and performed great. Now I can continue to enjoy. You have no idea how pleased I am right at this moment with temp control. WOOHOOO!!!
cany Posted June 24, 2015 Posted June 24, 2015 Question I rebuilt the coil again I have 6-7 wraps on it and Im still reading 0.10 ohm I thought more wraps the higher the ohms went
Bebop Posted June 24, 2015 Author Posted June 24, 2015 You built a pretty good one according to steam-engine. 28g on 3mm at 7 wraps is exactly .10 ohms
cany Posted June 24, 2015 Posted June 24, 2015 Bebop should more wraps give me a higher number? 1.0 Is what I had with 5 wraps after I got the over heating issue fixed
cany Posted June 28, 2015 Posted June 28, 2015 Ok did a 6 wrap 28ga NI got 0.14 had to get one of these http://comingsoon.radioshack.com/radioshack-led-helping-hands-with-magnifier/6400235.html#.VZA8dZzLKRF to see what I was doing
Bebop Posted June 29, 2015 Author Posted June 29, 2015 No worries. Mine do that too. There are subtle differences that can change the resistance ever so slightly. And at this level your talking hundredths of an ohm - very small amount.
Bebop Posted June 29, 2015 Author Posted June 29, 2015 I hear ya. Had one creep down to .11 and I had to think twice about puttin it up to my mouth cuz I figure it's pretty close to turning in to a pipe bomb any lower than that. Haha
cany Posted June 29, 2015 Posted June 29, 2015 I hear ya. Had one creep down to .11 and I had to think twice about puttin it up to my mouth cuz I figure it's pretty close to turning in to a pipe bomb any lower than that. Haha Well now Im glad this invader built like a brick chit house lol
cany Posted July 4, 2015 Posted July 4, 2015 Can you guys post some close pics of the NI coils you have built on the sub mini
Bebop Posted July 4, 2015 Author Posted July 4, 2015 This is a 3mm diameter coil 10 wraps . coning out .15 ohms jasonculp and Rixter 2
Bebop Posted July 4, 2015 Author Posted July 4, 2015 10 full wraps. (Maybe 11. I sometimes do that. )
cany Posted July 4, 2015 Posted July 4, 2015 Im doing something horribly wrong I could never get that many wraps
jasonculp Posted July 4, 2015 Posted July 4, 2015 Im doing something horribly wrong I could never get that many wrapsI don't think you are doing anything wrong. I find it terribly difficult to build a 10 wrap coil in the SubTank Mini. Mine have been less wraps. I have a hard time hitting .1 ohm. This is why I have changed to the SauceCode. It isn't much better, but it is better (to build on). I wish someone would build something with a Lemo (sized) deck, better airflow, and top fill. So far I can't find it. I really don't want to go to the dual coils because it is twice the trouble (or at least you have to make the coils twice as big).
Bebop Posted July 4, 2015 Author Posted July 4, 2015 How big is that coil. I can see its seven wraps but what did you use to wrap it? maybe a little cotton heavy
cany Posted July 4, 2015 Posted July 4, 2015 (edited) I I try 10 wraps my spacing is real close and I have to bend the legs to get them too attachthat mess shows .13 at room temp Thats a 2nd dry fire Edited July 4, 2015 by cany
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now