Rixter Posted May 16, 2015 Author Share Posted May 16, 2015 Today's mail brought my Kanger Subtank Mini & bell cap and a spool of Ni200, so I wasted no time getting started. I made a 12 wrap 2.5mm 28g coil that metered at .12Ω and installed it into the RBA head of the Subtank Mini. The Invader Mini immediately went into temperature control mode and after a couple of settings adjustments, I was vaping. Everything is working as advertised and I couldn't be more pleased with my new setup. jasonculp 1 Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Do you know what resistance the TC coil is? I know the invader mini is supposed to auto detect a TC coil. Is there a way to manually set it in TC mode? My first guess is it's not correctly reading your coils. Can you post a link to the coils (TC) that you found? It never auto detected the coil I had to manually let it know it had a new coil . Yes Theres a manual mode to set the TC temp Heres the coils I got. http://www.vaporshark.com/nautilus-tsc-5pack Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Today's mail brought my Kanger Subtank Mini & bell cap and a spool of Ni200, so I wasted no time getting started. I made a 12 wrap 2.5mm 28g coil that metered at .12Ω and installed it into the RBA head of the Subtank Mini. The Invader Mini immediately went into temperature control mode and after a couple of settings adjustments, I was vaping. Everything is working as advertised and I couldn't be more pleased with my new setup. Some how Me thinks Im gonna have to get A Kanger to use the TC feature Link to comment Share on other sites More sharing options...
Rixter Posted May 16, 2015 Author Share Posted May 16, 2015 Some how Me thinks Im gonna have to get A Kanger to use the TC feature When I first installed the Nickel coil and pressed the fire button, the coil glowed red hot. I guess it took the mod a second or two to figure out that it was an Ni200 coil. Then it went into TC mode. Maybe the same thing is happening with your Nautilus coils and causing them to pop. Try installing a fresh one and this time, try a short press and release on the fire button. Do it a couple of times and maybe it will recognize the Nickel coil and go into TC mode without popping your new coils. Link to comment Share on other sites More sharing options...
Bebop Posted May 16, 2015 Share Posted May 16, 2015 I really like that bell cap. Rixter 1 Link to comment Share on other sites More sharing options...
Bebop Posted May 16, 2015 Share Posted May 16, 2015 Yeah that's why i asked what watts it was set at. Maybe set to low watts/volts first too? Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 When I first installed the Nickel coil and pressed the fire button, the coil glowed red hot. I guess it took the mod a second or two to figure out that it was an Ni200 coil. Then it went into TC mode. Maybe the same thing is happening with your Nautilus coils and causing them to pop. Try installing a fresh one and this time, try a short press and release on the fire button. Do it a couple of times and maybe it will recognize the Nickel coil and go into TC mode without popping your new coils. Should I use a new coil? Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Yeah that's why i asked what watts it was set at. Maybe set to low watts/volts first too? With the coil (not reading atomizer) i tried all diff Watt settings Link to comment Share on other sites More sharing options...
Rixter Posted May 16, 2015 Author Share Posted May 16, 2015 I really like that bell cap. Thanks. Link to comment Share on other sites More sharing options...
Rixter Posted May 16, 2015 Author Share Posted May 16, 2015 Should I use a new coil? I would. Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Ok trying coil #3 lol Worst case the shop taking them back :yes Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Put TC coil #3 in Mod didnt got TC mode I had to let it know it was a new coil Havent fired yet messing with TC setting too see if maybe I did something wrong Link to comment Share on other sites More sharing options...
jasonculp Posted May 16, 2015 Share Posted May 16, 2015 Today's mail brought my Kanger Subtank Mini & bell cap and a spool of Ni200, so I wasted no time getting started. I made a 12 wrap 2.5mm 28g coil that metered at .12Ω and installed it into the RBA head of the Subtank Mini. The Invader Mini immediately went into temperature control mode and after a couple of settings adjustments, I was vaping. Everything is working as advertised and I couldn't be more pleased with my new setup. I just got nearly the same thing in. I didn't get the Bell Cap, but I wish I would have. I got the Coils and Wire. The only problem is the TC Mod I chose is on a very expensive slow trip from china! I went with the 60 Watt TC Zero Clone (Probably made by SKX). I can't wait! I guess I could also get the Bell Cap before the mod gets here (run the bell cap on the Temp Control Subtank Mini and regular top on my non temp control Mini) @Rixter... Thanks for the suggestion on Triangle Vape and the new EFest 18650s. I got 2 25R's Which are great, but so far the Efests seem to last a bit longer. (on my Sigelei Mini @ 30 watts, Lemo 2 @ .9 ohms) Rixter 1 Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 OK 3rd coil I got a temp lock and not getting "no atomizer" message Rixter 1 Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Maybe first 2 coils bad out of the box?? Link to comment Share on other sites More sharing options...
Bebop Posted May 16, 2015 Share Posted May 16, 2015 (edited) What is your wattage setting? Edited May 16, 2015 by Bebop Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 14 w NOW 440 TC seems good Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Its reading coil now and Im getting a nice even hit :wallbash: Rixter 1 Link to comment Share on other sites More sharing options...
Bebop Posted May 16, 2015 Share Posted May 16, 2015 There you go. Now all you need to do is throw a big steak on the grill and tap that keg. Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 There you go. Now all you need to do is throw a big steak on the grill and tap that keg. Theres always a Keg on tap Wife left for the night she said DONT TOUCH THE STEAKS Now if I could only figure out what I did lol Link to comment Share on other sites More sharing options...
Bebop Posted May 16, 2015 Share Posted May 16, 2015 Who needs steak when you have a keg?? Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 Who needs steak when you have a keg?? Good point :yes Link to comment Share on other sites More sharing options...
cany Posted May 16, 2015 Share Posted May 16, 2015 So far so good why I have no clue Rixter 1 Link to comment Share on other sites More sharing options...
cany Posted May 18, 2015 Share Posted May 18, 2015 Rixter does your display screen get brighter when you hit the fire button? Link to comment Share on other sites More sharing options...
Rixter Posted May 18, 2015 Author Share Posted May 18, 2015 Yes. Link to comment Share on other sites More sharing options...
Recommended Posts