Sonar505 Posted April 3, 2015 Share Posted April 3, 2015 Hello again. Just Sharing my latest build. And requesting a little help from my fellow vapers. This is the type of mod where I am completely unsure If people will like it or Hate it or both. So I would very much appreciate as much feedback as possible. Even if you think its the gaudiest POS out there I will not mind just want some comments please.I started out wanting a 18350 Squonker with wood and copper materials. About half way thru I had to rethink my plans. I originally wanted to use one of the pennys as my switch and center the 510 connector but I did not make the box just quite tall or wide enough. So plan B was make a mechanical top switch, move 510 over and add a button for sqounking. Since I had already drilled the holes I left the penny's as a design element.Then drill out the Pos. pin and enlarge the airholes on my atomizer and Bobsyouruncle.Been testing it out for the last few days and everything working great. No leaks,,feeds and drains great. Very Light weight and feels wonderful in HandThe Pictures that follow were taken in Various Light Sources. With some in Hand and next to a 18650,Chana 30w, and the 18500 squonker I made last month. All for size comparison..Thank you very much for viewing and once again all Comments, Critiques, and or Questions are Very much appreciated. Link to comment Share on other sites More sharing options...
Tug Posted April 3, 2015 Share Posted April 3, 2015 Very cool Link to comment Share on other sites More sharing options...
Tam Posted April 3, 2015 Share Posted April 3, 2015 It looks very nice, but for me, I think I'd like it sanded a little more to be smoother. The rough wood look, although nice, seems like it would too easily catch and hold all kinds of fabric lint until it becomes a big ball O'fuzz. Link to comment Share on other sites More sharing options...
Tug Posted April 3, 2015 Share Posted April 3, 2015 I would also cut some finger grooves kind of like the Tesla box.Give it a little more of a comfortable feel Link to comment Share on other sites More sharing options...
WillBlack Posted April 3, 2015 Share Posted April 3, 2015 Nice work. Link to comment Share on other sites More sharing options...
vaping_jake Posted April 3, 2015 Share Posted April 3, 2015 Nice job, love the penny inserts. Here is my opinion on it. Maybe use older penny with copper in it. I bet even a silver dollar mod would look awesome. I agree with Tam, a bit smoother looking would be nice. Is the center pin spring loaded? Link to comment Share on other sites More sharing options...
jasonculp Posted April 3, 2015 Share Posted April 3, 2015 I like it! Great job. I wish I could build one! Link to comment Share on other sites More sharing options...
shen_long86 Posted April 4, 2015 Share Posted April 4, 2015 Very nice work...would love to do that. Link to comment Share on other sites More sharing options...
GeorgeF Posted April 4, 2015 Share Posted April 4, 2015 (edited) Good job. I agree with the rough looking wood. Would have sanded it ultra smooth then stained and poly. Sand again,poly,wet sand and poly,repeat until it looked like glass. But, it looks better than anything I could ever do, not good with wood unless its a fire. Not sure about squank boxes, can't fully grasp the concept. Seems like juice would go everywhere. Edited April 4, 2015 by GeorgeF Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now