vaping_jake Posted January 22, 2015 Share Posted January 22, 2015 I like the flexibility that the new kanger subtank offers. I will definitely purchase this unit. It allows one to use thier own coils and cotton or simply swap back to a tank with pre fab coils. Now the question is when i want to put it in RBA mode, what would one recommend i place it on? A dig mod? a mech mon? a box? Would definately love to hear from those who have both setups. A friend of mine recommends a 100w box, he has it setup that way but he is a cloud chaser. Link to comment Share on other sites More sharing options...
Tam Posted January 22, 2015 Share Posted January 22, 2015 The recommendations would probably depend on what you want to do with it. Do you want to cloud chase? Are you mainly after flavor? Do you absolutely have a need for 100w? Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 22, 2015 Share Posted January 22, 2015 With the advancements that have happened with the chip sets I'd personally get a nice regulated box mod. Link to comment Share on other sites More sharing options...
vaping_jake Posted January 23, 2015 Author Share Posted January 23, 2015 Tam; I dont have a need for a 100w, but if i am going to buy 40w and then later 100w is the next step i would just buy that. I do love flavor, thats why i want to go with the cotton coils over silk. I am not a cloud chaser, but i hear eventually evolution will win and i will be one. lol Link to comment Share on other sites More sharing options...
Tam Posted January 23, 2015 Share Posted January 23, 2015 Tam; I dont have a need for a 100w, but if i am going to buy 40w and then later 100w is the next step i would just buy that. I do love flavor, thats why i want to go with the cotton coils over silk. I am not a cloud chaser, but i hear eventually evolution will win and i will be one. lol You're probably right, Jake, but so far I'm in denial and firmly sitting in the "I have no need for 100w" circle. My fingers are crossed that I can stay there. I have too much stuff as it is. LOL Link to comment Share on other sites More sharing options...
Earthling789 Posted January 23, 2015 Share Posted January 23, 2015 I look at it this way... the sub-tank 0.5 Ohm coils are recommended to be used at a maximum 30W, which means my IPV-mini ($50), or an iStick 30W would be all the power needed. Also, even if using a mech-mod, 0.5 Ohms @ 4.1V is only 33.6W. I'm sure if you were cloud-chasing, you'd want/need more power, but for the average-Joe... a 30W device will suffice... and a 50W device would fit the needs of the vast majority of vapers (all but that 1-2% of cloud-chasers). Link to comment Share on other sites More sharing options...
shen_long86 Posted January 25, 2015 Share Posted January 25, 2015 so if i get a sub tank and a dna 30 box mod, would that mod be able to fire the 0.5 ohm coils? Link to comment Share on other sites More sharing options...
jasonculp Posted January 25, 2015 Share Posted January 25, 2015 so if i get a sub tank and a dna 30 box mod, would that mod be able to fire the 0.5 ohm coils? The data sheet that I have shows .5 as the lower limit for the Evolv DNA 30. It should work. The problem you can run into is many of these mods don't read the ohms of the atomizer correctly and might not fire. I have tried the .5 ohm coil on the iStick 30 watt, Sigelei 30 mini, and my ipv3. I was just trying to check to see how close the ohms read on the 3 different devices. If you have a specific box mod you are looking at post a link and someone would be glad to check it out and make sure it is compatible. More than likely someone here runs the combination you are looking for! Tam 1 Link to comment Share on other sites More sharing options...
drakeThade86 Posted January 26, 2015 Share Posted January 26, 2015 http://www.bestecigarettesolution.com/hana-modz-dna-30-style-vw-mods.html This one Link to comment Share on other sites More sharing options...
jasonculp Posted January 26, 2015 Share Posted January 26, 2015 (edited) There are so many Hana Clones! This one seems to get pretty good reviews. The picture of the DNA type board looks a lot like Cloupor's version, but I can't tell. Here it is on SlowTech: http://www.fasttech.com/products/3032/10007864/1893404 I personally don't have any experience with this one, but chances are someone on here does! Edited January 26, 2015 by jasonculp Link to comment Share on other sites More sharing options...
drakeThade86 Posted January 26, 2015 Share Posted January 26, 2015 Yea im hoping so jason Link to comment Share on other sites More sharing options...
NCHornet Posted January 27, 2015 Share Posted January 27, 2015 I am in the same boat, although I ordered the Atlantis sub ohm tank. Since my VTR can't handle sub ohm vaping this led me to the XPRO M50. But then they came out with the M65 for cheaper, so I bought one. Still waiting on delivery for both of them. Check out the M50 OR M65, they can be used as a regulated mod, or switch to a mech mode which bypasses the circuit board and allows you to draw directly from the battery. Sounds like the best of both worlds, but what do I know? A month ago I didn't even know what the term Vaping meant, lol!!!!!! Link to comment Share on other sites More sharing options...
sixvape Posted February 3, 2015 Share Posted February 3, 2015 Regulated box mod because there is no voltage drop when battery is low. Much more powerful than a mech mod. Earthling789 1 Link to comment Share on other sites More sharing options...
edgy77 Posted February 3, 2015 Share Posted February 3, 2015 I have the kanger subtank mini. I run it on the ipv2s at 20 watts and love it. Ive noticed for some reason with the mini I get a burnt hit at 25 watts. So I keep it toned down. I use my subtank most of the time and my little boy rda other times. I use an ipv2s for both of then. Stock 60watts and can be upgraded to 75watts for free. Link to comment Share on other sites More sharing options...
Rixter Posted February 4, 2015 Share Posted February 4, 2015 (edited) Here's what I've got powering my Subtank at the moment: It's Aspire's CF 18650 Mod, and it's powered by a Sony VTC4 2100mAh battery. It works beautifully, and IMO looks pretty sweet, too. I've got a SmokTech M50 65W box mod on the way, so I'll repost when I have a chance to try it out. Edited February 4, 2015 by Rixter jasonculp 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now