jasonculp Posted December 31, 2014 Share Posted December 31, 2014 Taken from Innokin's Facebook page: https://www.facebook.com/Innokin.Technology Happy New Year! This is the iTaste MVP3.0! The MVP3 is a 30W device with a 3800Mah Battery that can fire down to .4ohm and can charge electronic devices. It has a smart and clear OLED screen with intuitive controls, well placed flush stainless steel threads, high quality spring connector and a strong side fire button. It is initially available in 4 colors and, like the MVP2.0, there will be wraps. To show that this is the real deal, we are going to be giving the MVP3 to Phil Busardo and Dimitris when they visit Shenzhen and we are planning to ask them to review the MVP3 at Innokin next Monday when they tour the Innokin factory and offices. We are going to be running a '24 hour MVP3 Giveaway' where Innokin will give away a total of 24 MVP3s and 24 Gladius Tanks to lucky winners on this subReddit and on our Facebook page every hour. The iTaste MVP3.0 is going to be priced very affordably and will be covered by the Innokin 90 Day Limited Warranty. The launch date will be announced during the giveaway, which will be competitively soon. Have a great and happy New Year's Eve everyone and Thank You very much for such a great year!!! Have a great night and a great 2015!! Link to comment Share on other sites More sharing options...
Tam Posted December 31, 2014 Share Posted December 31, 2014 Interesting. The corners of the MVP3s look a bit sharper than the 2. I wonder if that'll make a difference in how it feels to hold... Link to comment Share on other sites More sharing options...
jasonculp Posted December 31, 2014 Author Share Posted December 31, 2014 Interesting. The corners of the MVP3s look a bit sharper than the 2. I wonder if that'll make a difference in how it feels to hold... I noticed that too. I really like the way it looks, but I don't know if I would like the way it feels in my hands. They said on Reddit that it is slightly taller than MVP2. I like the 510, the side mounted button, and the fact is is supposed to have a genuine Evolv chip in it. Too many new mods coming out that I want! Link to comment Share on other sites More sharing options...
Compenstine Posted December 31, 2014 Share Posted December 31, 2014 Innokin and Evolv have been working together so yes, it is more than likely an Evolv chip. Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 31, 2014 Share Posted December 31, 2014 I like it. Be great for a kayfun Link to comment Share on other sites More sharing options...
Earthling789 Posted January 1, 2015 Share Posted January 1, 2015 I'm just glad they decided to put the firing button on the short-side! Now to check the couch-cushions for spare change, and wait for the V|T store to stock them Tug 1 Link to comment Share on other sites More sharing options...
Tam Posted January 1, 2015 Share Posted January 1, 2015 I'm just glad they decided to put the firing button on the short-side! Now to check the couch-cushions for spare change, and wait for the V|T store to stock them That was the biggest drawback and why I never did try an MVP2, the button on the flat side just didn't feel right for me. Now, with the new design... I don't have that excuse anymore... I'm still waiting for the VT store to restock the Eleaf iStick. Can't make up my mind between the blue and the red so I may have to get both. Link to comment Share on other sites More sharing options...
Earthling789 Posted January 1, 2015 Share Posted January 1, 2015 That was the biggest drawback and why I never did try an MVP2, the button on the flat side just didn't feel right for me. Now, with the new design... I don't have that excuse anymore... I'm still waiting for the VT store to restock the Eleaf iStick. Can't make up my mind between the blue and the red so I may have to get both. I love my MVP, and my only complaint ever has been with the position of the button. I face it forward and fire it with my finger rather than my thumb, but I would very much have preferred it to be facing on the short-side like the VTR or iStick.... At least the new V3 will have it "right", lol. I bought a blue iStick from my B&M, and the color reminds me of the 1960's Aluminum cups my mother served iced-tea in (wow, I just told my age, lol). The color is vibrant and VERY blue, and it really comes to life with the polished Stainless Steel of my KPT2's and KPT3-minis... I'm waiting for the VT store to restock too... I'm trying to decide now between black and silver for #2.... although either will be perfectly fine with me My only concern with them is the 510 threading... some say they strip-out easily, and the one I have seems to have some "slop" in the threads, but so far seems to be working just fine. Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted January 1, 2015 Share Posted January 1, 2015 I'm hoping to replace some of my aging Spinners with the iStick so I could just put in a 510 to 510 adapter to keep it from stripping all the way if it should start. Since I use HH.357s. the drip shield should cover the adapter quite well should it be needed. Yeah, I really like the short side button on my VTR. I can't imagine how I would hold it if the button were on the long flat side. Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 1, 2015 Share Posted January 1, 2015 I'm getting either this or the ipv mini for my wife due to her old MVP going on the fritz. Charging port is wanting to go out. The her old MVP will be mine to Frankenstein lol Link to comment Share on other sites More sharing options...
Earthling789 Posted January 1, 2015 Share Posted January 1, 2015 You learn to manage with the button on the long-side... it's not horrible, but I agree, the short-side is so much more comfortable. I've been leaving the eGo adapter on my blue one... since the iSticks ARE replacing my eGo-T's, and I've been using my KPT3-minis more than the full-size tanks, it's not been an issue... but I've also been considering getting one of the 510 flip-connectors for using my larger tanks, so I can fold the unit for better portability... and not risk damage to the original threading. Link to comment Share on other sites More sharing options...
Tam Posted January 1, 2015 Share Posted January 1, 2015 The her old MVP will be mine to Frankenstein lol Instead of LOL, why am I hearing Mwuahaha! instead? Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 1, 2015 Share Posted January 1, 2015 Instead of LOL, why am I hearing Mwuahaha! instead? Because that is basically what the pinky and the brain side of me is doing right now lmao Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted January 1, 2015 Share Posted January 1, 2015 ... I've also been considering getting one of the 510 flip-connectors for using my larger tanks, so I can fold the unit for better portability... and not risk damage to the original threading. What's a 510 flip-connector? That's something I'm not familiar with. Oooh, new toy? Because that is basically what the pinky and the brain side of me is doing right now lmao So, what are we going to do tonight, Brain? Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 1, 2015 Share Posted January 1, 2015 Conquer the world, pinky. Lol Tam 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 1, 2015 Share Posted January 1, 2015 iStick bending adaptor The iStick bending adaptor is designed to save space and make the device easier to carry. With the iStick bending adaptor, unnecessary wear and tear will be substantially reduced, which is better for protecting the thread. How To Use: First, screw the bottom of bending adaptor to iStick with the attached small tool. Then screw atomizer onto the adaptor. Through pressing the button of adaptor, one can easily flip the atomizer 180 degrees. This will not fold to 180 degrees with a 22mm device. Tam 1 Link to comment Share on other sites More sharing options...
Earthling789 Posted January 1, 2015 Share Posted January 1, 2015 Yep, that's it... Beat me to it Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 1, 2015 Share Posted January 1, 2015 Power of the cell phone lol Link to comment Share on other sites More sharing options...
Tam Posted January 1, 2015 Share Posted January 1, 2015 Interesting gadget. Thanks! Link to comment Share on other sites More sharing options...
tre_mel_low Posted January 9, 2015 Share Posted January 9, 2015 I recently acquired the new MVP 20 from Innokin. The button on the long side takes some getting used to, but my main issue is the amount of force required to depress the fire button. Definitely much firmer than that of any other device I've owned. Link to comment Share on other sites More sharing options...
joejoevapekins Posted January 9, 2015 Share Posted January 9, 2015 Been hearing after about a week or so it gives up some. Link to comment Share on other sites More sharing options...
jasonculp Posted February 6, 2015 Author Share Posted February 6, 2015 Link to comment Share on other sites More sharing options...
Recommended Posts