Mplough Posted December 28, 2014 Share Posted December 28, 2014 (edited) I have a friend that is a machinist. She has offered to build me a caddy after seeing my mostly pathetic homemade caddy that I drilled using a 2x4. I told her, hey it does the job. Anyway, she has the ability to draw one up in CAD and have her machine do it all or do it by hand. I'm opting for the automated version. Would anyone happen to have a blue print for one that I can give her? I saw this one at my local shop but it was given to them and they don't want to come off it. It looks like a block for an Audi 5 cylinder. Edited December 28, 2014 by Mplough Link to comment Share on other sites More sharing options...
Compenstine Posted December 28, 2014 Share Posted December 28, 2014 Looks nice, but I'm cheap LOL This is what I use: Most dollar stores carry them. Link to comment Share on other sites More sharing options...
Mplough Posted December 28, 2014 Author Share Posted December 28, 2014 WFT are those? Are those ice trays? Honestly if she hadn't offered I'd be all over those. Link to comment Share on other sites More sharing options...
Compenstine Posted December 28, 2014 Share Posted December 28, 2014 Yes Ice trays, Rubber bottom easy clean. I also use them to hold my small flavor bottles while I'm working on building new E-Liquid flavors. Oh yes and when I'm building KPT coils for all the parts. Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 28, 2014 Share Posted December 28, 2014 Never be surprised at what you can find at your dollar and hardware store. Hell even hobby lobby got some stuff that is hella nice and could be modded for our use Link to comment Share on other sites More sharing options...
Mplough Posted December 28, 2014 Author Share Posted December 28, 2014 Which flavor dollar store? Dollar General, Dollar Tree? That is a cool thought. BTW someone should offer a glass bottle buy back program. I have about 12 empty bottles sitting on my desk. Link to comment Share on other sites More sharing options...
Tam Posted December 28, 2014 Share Posted December 28, 2014 I use an acrylic make-up organizer as a battery stand and juice holder. The drawer part holds lots of drip tips. A nail polish holder is on my wall with all kinds of juice bottles within easy reach. Link to comment Share on other sites More sharing options...
Mplough Posted December 28, 2014 Author Share Posted December 28, 2014 I use an acrylic make-up organizer as a battery stand and juice holder. The drawer part holds lots of drip tips. A nail polish holder is on my wall with all kinds of juice bottles within easy reach. PICS! Link to comment Share on other sites More sharing options...
Compenstine Posted December 28, 2014 Share Posted December 28, 2014 I got mine at Dollar General. I thought about the bottle buy back, the one problem is contamination. The cost the sterilize them is expensive. Then (Like the Pop industry found out) can be a huge liability. Link to comment Share on other sites More sharing options...
Compenstine Posted December 28, 2014 Share Posted December 28, 2014 I use the plastic cases from Hobby Lobby to hold my tips and other small stuff like that. They have many sizes, but like this one. Link to comment Share on other sites More sharing options...
Tam Posted December 28, 2014 Share Posted December 28, 2014 (edited) PICS! Sorry, I don't have time right now to get a good pic and put it up but this is the one I use. http://www.amazon.com/Acrylic-Crystal-Cosmetic-Organizer/dp/B00G1D3GDI/ref=sr_1_103?ie=UTF8&qid=1419803622&sr=8-103&keywords=acrylic+makeup+organizer The little square lipstick holders are perfect for eGo style batteries, they also fit my Magneto mech mod and Provari mini and Evod . (oops. Meant Evic) Edited December 28, 2014 by Tam Earthling789 and Mplough 2 Link to comment Share on other sites More sharing options...
Earthling789 Posted December 28, 2014 Share Posted December 28, 2014 Scrap lumber and a drill-press... and a little time, and I made these to hold my tanks and eGo-style batteries... Yes, the round one is a solid-round closet-doorknob I also use a Plano tackle-box (the tiny, two-tray ones) to hold all my spare parts and coil-making materials... an even smaller one (double-sided fishing lure case) holds my dead Kanger coils while I'm waiting to rebuild them. Mplough, jasonculp, Compenstine and 1 other 4 Link to comment Share on other sites More sharing options...
jasonculp Posted December 29, 2014 Share Posted December 29, 2014 I have a friend that is a machinist. She has offered to build me a caddy after seeing my mostly pathetic homemade caddy that I drilled using a 2x4. I told her, hey it does the job. Anyway, she has the ability to draw one up in CAD and have her machine do it all or do it by hand. I'm opting for the automated version. Would anyone happen to have a blue print for one that I can give her? I saw this one at my local shop but it was given to them and they don't want to come off it. It looks like a block for an Audi 5 cylinder. Give me a few months! I don't have access to any modern cad programs. I am just learning. I can draw some decent 2D stuff with a lot of measurements, but, I am in no way proficient. I have just started using Sketchup (formally Google, now trimble) to get an iStick cap printed in 3D. In my job I have to do a lot of 2D drawing. I measure the gasket in the field and draw it. I email the part to our "real" cad guy and he makes sure it is clean, then sends it to the waterjet to be cut. Lately he says he doesn't have to clean up my drawings...lol Mplough 1 Link to comment Share on other sites More sharing options...
Mirage Posted December 29, 2014 Share Posted December 29, 2014 Tam, did I just count 86 bottles of juice on that shelf ?...omg. lol Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted December 29, 2014 Share Posted December 29, 2014 Tam, did I just count 86 bottles of juice on that shelf ?...omg. lol You probably did. That was over a year ago when I took that picture. All those juices have either been vaped or payed forward. It's full of new juices now and more than likely more than 100 altogether although they don't all fit in that organizer. LOL. Compenstine 1 Link to comment Share on other sites More sharing options...
crush02342002 Posted January 2, 2015 Share Posted January 2, 2015 Mine I made Mplough 1 Link to comment Share on other sites More sharing options...
Mplough Posted January 2, 2015 Author Share Posted January 2, 2015 Is that aluminum? Here is mine. She scribed it and it kinda looks like it's Egyptian. Made out of cedar. Link to comment Share on other sites More sharing options...
crush02342002 Posted January 2, 2015 Share Posted January 2, 2015 Yep Link to comment Share on other sites More sharing options...
Mplough Posted January 2, 2015 Author Share Posted January 2, 2015 What did you use to bore the block? Link to comment Share on other sites More sharing options...
crush02342002 Posted January 2, 2015 Share Posted January 2, 2015 Drill press and hole saws, oh and a little time Link to comment Share on other sites More sharing options...
NCHornet Posted January 6, 2015 Share Posted January 6, 2015 I also use a tackle box, keeps everything organized and out of sight. Works for me, although I should have bought a bigger one, lol!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now