Tennjed Posted December 21, 2014 Share Posted December 21, 2014 Dumb question i know, but I am think of maybe trying dripping out but not really wanting to build or rebuild coils. I currently have Ego and IPOW batteries and EVOD and Protanks. What is the simplest, easiest to use (and not terribly expensive) way to get into dripping? Link to comment Share on other sites More sharing options...
Earthling789 Posted December 21, 2014 Share Posted December 21, 2014 There are pre-built dripping atomizers, such as the HH.357... BOGE also has cheaper units (smaller too), which work very well. None of them are sub-ohm, so you can enjoy them with your eGo and IPOW batteries... no need to buy mech-mods jasonculp 1 Link to comment Share on other sites More sharing options...
jasonculp Posted December 21, 2014 Share Posted December 21, 2014 Here is some good advice: You could always direct drip with a prebuilt atomizer, that would be a cheaper alternative and much less expensive. There is a learning curve in how to use these successfully, but it's less of a learning curve than learning all about Ohm's Law, getting an RDA, wire, wick, ohm meter, torch, etc. http://www.vapelite.com/index.php?main_page=product_info&cPath=22_47&products_id=62 This is one that I learned on. These days I use an RDA but mostly, I use the Cisco Spec Hybrid HH.357 atomizers: http://www.avidvaper.com/hh-357-cisco-spec-hybrid-atomizers/ The HH.357s are not what I'd call "affordable" at a minimum of $22 each whereas the first link's atomizer is $2.50 each but you also get what you pay for. Link to comment Share on other sites More sharing options...
Earthling789 Posted December 21, 2014 Share Posted December 21, 2014 ^^^^ Thanks Jason... I couldn't find that tread fast enough jasonculp 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 21, 2014 Share Posted December 21, 2014 Lol was just about to post the same thing. Kid unplugged computer lol Link to comment Share on other sites More sharing options...
Tam Posted December 21, 2014 Share Posted December 21, 2014 You guys are funny. And so sweet to try to help someone so quickly. Link to comment Share on other sites More sharing options...
Earthling789 Posted December 21, 2014 Share Posted December 21, 2014 We were just trying to let you get your beauty-sleep, Tam Link to comment Share on other sites More sharing options...
Tam Posted December 21, 2014 Share Posted December 21, 2014 We were just trying to let you get your beauty-sleep, Tam Thank you for the consideration, Lord knows I need the rest. The "beauty" part didn't kick in, unfortunately. jasonculp, Earthling789, Mplough and 2 others 5 Link to comment Share on other sites More sharing options...
Mplough Posted December 21, 2014 Share Posted December 21, 2014 If you want to drip but don't want to wrap and test your own coils you can get them prebuilt to whatever ohm rating you want from eBay but MAKE SURE you check their feedback. There are plenty of builders that are in the US. Link to comment Share on other sites More sharing options...
shen_long86 Posted January 19, 2015 Share Posted January 19, 2015 you can also get pre built coils and wicks from http://www.fasttech.com/products/3033/10007181/1591806-pre-made-wires-and-wicks-for-atomizer-50-pack the only reason i say this is because i know i read in another thread on here about beginner dripping and somebody posted these from fast tech. so i am assuming that you could use them for dripping. Link to comment Share on other sites More sharing options...
MudDrum Posted January 19, 2015 Share Posted January 19, 2015 They do have a few 15mm drippers out there that will fit on an ego battery. This one is a clone of the hornet. The coil on this one is a pre-made 1.5 ohm from fasttech. Link to comment Share on other sites More sharing options...
Tam Posted January 20, 2015 Share Posted January 20, 2015 There are also direct drip atomizers that are pre-built. You don't need to know how to build coils to use these. There is a slight learning curve but it's much less than using an RDA. The link below are the ones I started dripping with. http://vapelite.com/index.php?main_page=product_info&products_id=62 Earthling789 1 Link to comment Share on other sites More sharing options...
Earthling789 Posted January 20, 2015 Share Posted January 20, 2015 There are also direct drip atomizers that are pre-built. You don't need to know how to build coils to use these. There is a slight learning curve but it's much less than using an RDA. The link below are the ones I started dripping with. http://vapelite.com/index.php?main_page=product_info&products_id=62 I love the Boge LR Atomizers. I still use their LR Atomizers to taste-test juices at the local B&M, and I use their LR Cartomizers when I'm cutting grass or doing auto repairs, so I don't drop/damage an expensive tank Tam 1 Link to comment Share on other sites More sharing options...
Tam Posted January 20, 2015 Share Posted January 20, 2015 I love the Boge LR Atomizers. I still use their LR Atomizers to taste-test juices at the local B&M, and I use their LR Cartomizers when I'm cutting grass or doing auto repairs, so I don't drop/damage an expensive tank They're "old school" by today's standards, but they still work well. Link to comment Share on other sites More sharing options...
Earthling789 Posted January 20, 2015 Share Posted January 20, 2015 They're "old school" by today's standards, but they still work well. Hey, I still drive a 46 year-old pickup truck... I LOVE old-school Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now