@hope_photography123 Posted December 17, 2014 Share Posted December 17, 2014 OK so it camr up in anot7dib forum... There's no general mod sub forum.. Like wat kind of battery do I use with my nemi with the coils I built at. .5 ohms... Or how do I get my lock Un locked... (jammed lock try rubber gloves.. Saved me!).. Ect.. So let's talk here till something like a general mod sub forum appears? Link to comment Share on other sites More sharing options...
Compenstine Posted December 17, 2014 Share Posted December 17, 2014 I'll just show off my Mech. It is the only one I use anymore. Voltage Drop Test Using 2 Different VTC 4 Batteries and 2 Different Builds: Akuma 1.8 ohm build on TOBH Battery Starting Volts 4.219 Volts Firing Mod no atty 4.219 Volts Under Load 4.120 0.099 volt drop Akuma 0.302 ohm build on Patriot Battery Starting Volts 4.226 Volts Firing Mod no atty 4.226 Volts Under Load 3.262 0.964 volt drop @hope_photography123 and joejoevapekins 2 Link to comment Share on other sites More sharing options...
smacksy Posted December 17, 2014 Share Posted December 17, 2014 OK so it camr up in anot7dib forum... There's no general mod sub forum.. Like wat kind of battery do I use with my nemi with the coils I built at. .5 ohms... Or how do I get my lock Un locked... (jammed lock try rubber gloves.. Saved me!).. Ect.. So let's talk here till something like a general mod sub forum appears? I agree we need a forum and sub-forums on mechanical mods, possibly laid out something like these. They are easy to navigate and takes us to exactly the help we are looking for..just a suggestion.. @hope_photography123 1 Link to comment Share on other sites More sharing options...
WillBlack Posted December 18, 2014 Share Posted December 18, 2014 I'll just show off my Mech. It is the only one I use anymore. Voltage Drop Test Using 2 Different VTC 4 Batteries and 2 Different Builds: Akuma 1.8 ohm build on TOBH Battery Starting Volts 4.219 Volts Firing Mod no atty 4.219 Volts Under Load 4.120 0.099 volt drop Akuma 0.302 ohm build on Patriot Battery Starting Volts 4.226 Volts Firing Mod no atty 4.226 Volts Under Load 3.262 0.964 volt drop Nice to see some real numbers for once. What charger you using to get 4.22V? @hope_photography123 1 Link to comment Share on other sites More sharing options...
Compenstine Posted December 18, 2014 Share Posted December 18, 2014 XTAR VC2 Strange part is, it is supposed to cut off at 4.20. The reading came from my Fluke, not the charger itself. @hope_photography123 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 18, 2014 Share Posted December 18, 2014 Lost my xtar. Another power converter has claim yet another battery charger @hope_photography123 1 Link to comment Share on other sites More sharing options...
WillBlack Posted December 18, 2014 Share Posted December 18, 2014 XTAR VC2 Strange part is, it is supposed to cut off at 4.20. The reading came from my Fluke, not the charger itself. I like it that way, those over hyped Nitecores always undercharge. That's well within spec. Most datasheets list: Standard charge CCCV, 1A, 4.20 ± 0.05 V, Today's batteries are quite robust and cheap (compared to when I started), may as as well fully charge them. @hope_photography123 1 Link to comment Share on other sites More sharing options...
smacksy Posted December 18, 2014 Share Posted December 18, 2014 (edited) http:// Voltage drop on two BFM's, with 28.5 mm Stillare and 22mm Zenith with same parallel 26g dual coil builds at .16 ohms in both, producing about 110 watts.. 1) copper BFM 4.21v without Atty 3.75 with Atty at .16 ohms = about .46v drop firing both coils 2) stainless BFM 4.2 v without Atty 3.61 with Atty at .16 ohms = about .59v drop firing both coils Both using the 26650 Efest batt rated at 32A cont /64A pulse..Both use hybrid top caps and copper/brass magnetic switches with recessed copper buttons/contacts..Just got the all copper 18650 XXIX with the same features but haven't checked actual voltage drop because it hits just as hard as its bigger brothers. All three are from Bay City Vapor, made here in Southern CA Edited December 18, 2014 by smacksy @hope_photography123 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 18, 2014 Share Posted December 18, 2014 (edited) Since yall did it. Had me wondering what mine was doing. Testing clone brass stingray with silver contacts. Running a fresh vtc4 Battery at 4.18 .24ohm build....my personal sweet spot W/O atty 4.18 W/Atty 3.78 1.2ohm build....highest I'll go on a mech 4.18 W/O Atty 4.02 W/Atty All in all not bad for a old clone mech Edited December 18, 2014 by joejoevapekins @hope_photography123 1 Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 18, 2014 Share Posted December 18, 2014 I want even begin to test that hunk of junk raivapes launcher Link to comment Share on other sites More sharing options...
smacksy Posted December 21, 2014 Share Posted December 21, 2014 Glas to see we finally got a mech forum..thx Jeffb and @hope_photography123 2 Link to comment Share on other sites More sharing options...
Tam Posted December 21, 2014 Share Posted December 21, 2014 Glas to see we finally got a mech forum..thx Now that there is one, what all do you have planned to do with it? @hope_photography123 1 Link to comment Share on other sites More sharing options...
smacksy Posted December 21, 2014 Share Posted December 21, 2014 (edited) Now that there is one, what all do you have planned to do with it? Learn more about my favorite mechanical mods, of course... How about you? Do you own a mechanical mod? Have you ever sub- ohm vaped on one before? Did you like it? Can you post a pic of your favorite mech if you own one? Any problems with it? etc, etc...That's only some of the things we can discuss on this new mech forum, and it should give you some insight...lol Edited December 21, 2014 by smacksy Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 21, 2014 Share Posted December 21, 2014 I'd have to say when it comes to mech sub ohm builds my personal sweet spot is between .24-.28ohms. Not supper big clouds but not tiny either. And great flavor considering I have a ton of airflow on my drippers. smacksy 1 Link to comment Share on other sites More sharing options...
smacksy Posted December 21, 2014 Share Posted December 21, 2014 (edited) I'd have to say when it comes to mech sub ohm builds my personal sweet spot is between .24-.28ohms. Not supper big clouds but not tiny either. And great flavor considering I have a ton of airflow on my drippers.I hear ya; but I like blowing clouds, and my builds usually run between .16 -.12 ohms.. I too get plenty of airflow on my RDA's that let's me blow clouds like these.. Edited December 21, 2014 by smacksy Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 I hear ya; but I like blowing clouds, and my builds usually run between .16 -.12 ohms.. I too get plenty of airflow on my RDA's that let's me blow clouds like these.. Nice one smacksy.. U compete? smacksy 1 Link to comment Share on other sites More sharing options...
smacksy Posted December 21, 2014 Share Posted December 21, 2014 Nice one smacksy.. U compete? No..just like to bust out a good cloud or two now and again...lol Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 So yea we have a mec forum...thanks I'm glad you all added some stats and pics comments! I had to catch up a bit but I'm such a newbie to mecs all of this information great!.. OK so I'm waiting for my meters so I can't add my stats besides the basics (Oh yeah and I'm waiting for my effest batteries 20 amps.. But here's my stats presently My nemi mod Big dripper rda 0.7 ohms Battery at the moment . 18650.. Obviously 1600 mah 3.7V No idea what the drop is yet? I'm staying close to the . 7 .8 1.0ohm range anyway so nothing nuclear... . Basic dual coil build smacksy 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 No..just like to bust out a good cloud or two now and again...lol I can appreciate the good cloud ☁ nothing quite satisfies.. Lol smacksy 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 O meant nothing else quite satisfies myself as a nice cloud once and again.. Idk I cut myself completely off? Link to comment Share on other sites More sharing options...
smacksy Posted December 21, 2014 Share Posted December 21, 2014 That's a start..a 18650 I like is the 35A purple Efest..it handles builds OK down to about .15 ohms.. Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 Yea see I'm not building that low yet.. So I grabbed them up for a Xmas gift to myself.. And then I'm not opening them till Xmas.. Lol Link to comment Share on other sites More sharing options...
smacksy Posted December 21, 2014 Share Posted December 21, 2014 Yea see I'm not building that low yet.. So I grabbed them up for a Xmas gift to myself.. And then I'm not opening them till Xmas.. Lol Yeah man! Lol Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 http:// Voltage drop on two BFM's, with 28.5 mm Stillare and 22mm Zenith with same parallel 26g dual coil builds at .16 ohms in both, producing about 110 watts.. 1) copper BFM 4.21v without Atty 3.75 with Atty at .16 ohms = about .46v drop firing both coils 2) stainless BFM 4.2 v without Atty 3.61 with Atty at .16 ohms = about .59v drop firing both coils Both using the 26650 Efest batt rated at 32A cont /64A pulse..Both use hybrid top caps and copper/brass magnetic switches with recessed copper buttons/contacts..Just got the all copper 18650 XXIX with the same features but haven't checked actual voltage drop because it hits just as hard as its bigger brothers. All three are from Bay City Vapor, made here in Southern CA So nice set there.. I know that I said mec forum.. But I noticed that our builds on the parallel are both close.. I buy wire at the vape store first time ever knew nothing about different sizes yet.. Lol so the girl gives me a real of some Idk wat? How do you think I might find out what it is? Link to comment Share on other sites More sharing options...
@hope_photography123 Posted December 21, 2014 Author Share Posted December 21, 2014 See you use dual parallels and come in around where I did with this build once. Decision was not to use it and I single coiled it.. Came in at half ur build.. Makes me wonder? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now