smacksy Posted December 15, 2014 Posted December 15, 2014 (edited) Waiting for this to become more available as it just got released .. I'm a big kayfun fan and this is the latest version..dual coils are possible with better air control as well as juice feed with 4 deep juice channels..made in Germany and runs $180 from what I've read about it..who knows, the Chinese may clone it and charge about $50 for it in the not to distant future.. Edited December 16, 2014 by smacksy
WillBlack Posted December 18, 2014 Posted December 18, 2014 How bout $23 http://www.fasttech.com/products/3028/10006473/2018000
joejoevapekins Posted December 18, 2014 Posted December 18, 2014 The deck on that it looks like a pain to build
smacksy Posted December 18, 2014 Author Posted December 18, 2014 How bout $23 http://www.fasttech.com/products/3028/10006473/2018000 I'm not into waiting forever for that long boat ride from China to get here..
fishguy1123 Posted December 19, 2014 Posted December 19, 2014 The deck on that it looks like a pain to build Normal Kayfun build from what I've seen. I'ts designed for single coil, but so was the previous versions and ppl build duals if they want.
smacksy Posted December 19, 2014 Author Posted December 19, 2014 (edited) Normal Kayfun build from what I've seen. I'ts designed for single coil, but so was the previous versions and ppl build duals if they want. The Kayfun V4 ($180) I've watched on YouTube and researched online has a bigger deck, 2 airholes 3 posts, and 4 deep juice channels all designed for dual coils and better airflow...will check one out in person at my local B&M shop when I get the time...see if this is for real...lol Edited December 19, 2014 by smacksy
WillBlack Posted December 19, 2014 Posted December 19, 2014 Normal Kayfun build from what I've seen. I'ts designed for single coil, but so was the previous versions and ppl build duals if they want. Yes it is primarily for single coil builds.
fishguy1123 Posted December 20, 2014 Posted December 20, 2014 Yeah, 4 outside air inlets to a single one on the build deck. 4 juice inlets to feed the wick. 4 (2 negatives and 2 positives) screws to trap the wires. An upgrade airflow pin to get more flow, but not adjustable. Still, just as easy to build on as all the previous kayfuns..... IMO
DragonGunner Posted December 22, 2014 Posted December 22, 2014 The V4 looks extremely interesting but it has major competition with the release of the eleaf lemo and the billow rta's. I will have to wait this one out a bit. smacksy 1
smacksy Posted December 22, 2014 Author Posted December 22, 2014 The V4 looks extremely interesting but it has major competition with the release of the eleaf lemo and the billow rta's. I will have to wait this one out a bit. Yeah man, me too! Lol
Mr Smith Posted January 1, 2015 Posted January 1, 2015 (edited) V4 looks to solve all problems the previous generations had. No more whistle, no more draining the tank to rebuild, dual coil ready, pyrex glass center section, juice flow control, adjustable airflow, adjustable 510 pin not holding the deck down anymore, changeable connection, and clones are available already for $30 from tobeco! Soooo getting one! Love my kfl+ but my biggest complaints about it are both fixed in v4...those being whistle, and need to drain to access build deck... Oh another new feature: top filling! Shut off juice flow and open up the top to fill...threads are recessed on 2 sides to prevent pressure build until the last thread. Once top is back on, twist the bottom to open up juice flow again. Pbusardo has already done an excellent review on this tank. Edited January 1, 2015 by Mr Smith GeorgeF 1
Earthling789 Posted January 1, 2015 Posted January 1, 2015 I bought Russians because I wasn't too fond of the airflow designs of the previous generations of the Kayfun (and especially the fill-port design of the 3.1). Now that I've seen Pbusardo's review of the V4, I want one too... but instead of buying a ToBeCo clone, I think I'll wait for an EhPro or HCigar clone. Unless ToBeCo's quality has improved, that is...
fishguy1123 Posted January 2, 2015 Posted January 2, 2015 I can only speak to the ehpro kfl+ clone I have, but I would most likely buy one of the v4 versions if they make one the next time I want to get something.
joejoevapekins Posted January 2, 2015 Posted January 2, 2015 I might get one and pair it with a 30watter
fishguy1123 Posted January 2, 2015 Posted January 2, 2015 Does the pairing involve candles and weird music in the background?
joejoevapekins Posted January 2, 2015 Posted January 2, 2015 Does the pairing involve candles and weird music in the background? don't forget the goat lol
fishguy1123 Posted January 2, 2015 Posted January 2, 2015 How could I? Lil bastard haunts me............
Earthling789 Posted January 3, 2015 Posted January 3, 2015 I just found the AMOD clone of the Kayfun V4 for $30 (w/ free shipping) on Code Vape They even "cloned" the SvoeMesto original box, lol... Anyone have experience with AMOD clones, and could tell me if they are better than Tobeco? Of course, for $30 shipped, I may pull the trigger anyway...
joejoevapekins Posted January 3, 2015 Posted January 3, 2015 Amod is a great company. They made the freak show rda. They also make the best zna clone. One I wanted but couldn't find lol
Earthling789 Posted January 3, 2015 Posted January 3, 2015 That's good enough for me Thanks Joe... One V4 about to be ordered...
Earthling789 Posted January 3, 2015 Posted January 3, 2015 I just purchased it from CodeVape.com... $29.95 and free shipping
Earthling789 Posted January 3, 2015 Posted January 3, 2015 Will Do! (posted from my campsite behind my mailbox) joejoevapekins 1
Recommended Posts