Dylanacessna Posted December 14, 2014 Share Posted December 14, 2014 Hello! I recently bought the Knight mod but the contact pin fell out one day and I lost it. I need a replacement set and I'm new so I don't know which ones fit and which ones dont. I can't find one that says it's specifically for my mod. Link to comment Share on other sites More sharing options...
Tam Posted December 14, 2014 Share Posted December 14, 2014 Have you tried contacting the vendor where you bought the Knight mod in the first place? That would be the first place I'd go. Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 14, 2014 Share Posted December 14, 2014 Who is it cloned by. That will help alot. But considering most pins range from 5-20$ because they are usually upgraded pins. You could try a hardware store see if they have a match. Might Link to comment Share on other sites More sharing options...
Dylanacessna Posted December 14, 2014 Author Share Posted December 14, 2014 Have you tried contacting the vendor where you bought the Knight mod in the first place? That would be the first place I'd go. Tried but they are closed today and I really just want to order one now. Who is it cloned by. That will help alot. But considering most pins range from 5-20$ because they are usually upgraded pins. You could try a hardware store see if they have a match. Might It's not a clone. And I can just get them at any average hardware store? Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 14, 2014 Share Posted December 14, 2014 Try ace Link to comment Share on other sites More sharing options...
Earthling789 Posted December 14, 2014 Share Posted December 14, 2014 Ace and True-Value are my go-to for odd parts, pins, and screws. Occasionally I'll luck-out at Lowe's or Radio-Shack, too, but RS is a last-ditch try... unless you're also looking for a cell-phone, over-priced TV, or inferior RC car Link to comment Share on other sites More sharing options...
Dylanacessna Posted December 14, 2014 Author Share Posted December 14, 2014 Try ace I only have Menard and Home Depot :/ Will either of those do? I'm honestly just looking for a set I can order online. This is my mod http://www.oliovapes.com/product/knight-mod-vape-smith/ Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 14, 2014 Share Posted December 14, 2014 Fatfaddy vapes H80 Brass Contact Blanks 8mmX4mm base with 3mm flat head slot. 11mm of thread in M4 and M3. Cut and file according to your need. Virgin H80 brass (Freshly milled 80% copper brass) for maximum conductivity. Great for posi contacts (Caravela, Panzers, Chi, Nemis, others) and negative contacts (Chi, Caravela, King, others). Comes with (2) 4mm and (2) 3mm pieces. M3 BLANK FIXES THAT SHORT KATO BOX PIN!!! $ 4.99These might work. Don't know Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now