crush02342002 Posted December 12, 2014 Share Posted December 12, 2014 Jason im a little jelly you got the ipv3, ecig and vapor lounge was supposed to get them soon but only had the sig in stock at the time and the sig was only 119. Link to comment Share on other sites More sharing options...
Compenstine Posted December 12, 2014 Share Posted December 12, 2014 Hi Mothy! Link to comment Share on other sites More sharing options...
jasonculp Posted December 12, 2014 Share Posted December 12, 2014 Jason im a little jelly you got the ipv3, ecig and vapor lounge was supposed to get them soon but only had the sig in stock at the time and the sig was only 119. I like it a lot, but it is just impractical for me right now. I am running VTC4's in it, but I only use it a few hours a night, so I don't know what kind of battery life I am getting out of it. So far so good! Link to comment Share on other sites More sharing options...
crush02342002 Posted December 12, 2014 Share Posted December 12, 2014 Hi Mothy! HEY COMP!!! whats been up Link to comment Share on other sites More sharing options...
crush02342002 Posted December 12, 2014 Share Posted December 12, 2014 I like it a lot, but it is just impractical for me right now. I am running VTC4's in it, but I only use it a few hours a night, so I don't know what kind of battery life I am getting out of it. So far so good! how is the touch sensor on it? Iv always thought that feature was awesome Link to comment Share on other sites More sharing options...
Compenstine Posted December 12, 2014 Share Posted December 12, 2014 Vapen, Work'en and Play'en What else is there! Good to see you back and hope all is well with you. Link to comment Share on other sites More sharing options...
jasonculp Posted December 12, 2014 Share Posted December 12, 2014 how is the touch sensor on it? Iv always thought that feature was awesome It is actually disabled on the IPV3, or at least all of them I have seen. I think the 50 watt version still has it. I saw one disassembled on the internet the other day and it didn't even have anything but a hole where it is supposed to be. I have not got the guts to take off the panel on mine. I probably should though, apparently they have some that have some out there with nicked wire and bad soldering. Link to comment Share on other sites More sharing options...
crush02342002 Posted December 12, 2014 Share Posted December 12, 2014 hmmm interesting, idk were I heard it but I had heard there was an issue with them. Vapen, Work'en and Play'en What else is there! Good to see you back and hope all is well with you. its getting better all the time comp Compenstine 1 Link to comment Share on other sites More sharing options...
crush02342002 Posted December 12, 2014 Share Posted December 12, 2014 I got a chance to see the god mod in person at my local b&m....oh man would I like to get my hands on it for a bit. Link to comment Share on other sites More sharing options...
jlh 1741 Posted December 28, 2014 Share Posted December 28, 2014 If u get a sigelei 100 get the 100 plus. The original 100's have issues with the 510 pins and being able to accurately read ohms. Mine jumps all over the place with all of my rda's. Only thing I don't have an issue with us my Atlantis. Link to comment Share on other sites More sharing options...
christov11 Posted December 29, 2014 Author Share Posted December 29, 2014 well I havent had any trouble with mine.... using the MX right now and had the CLTV2 before that and both worked great! Link to comment Share on other sites More sharing options...
redneck vaper Posted January 1, 2015 Share Posted January 1, 2015 If you are looking for cons i have one. I had an IPV 2s for about 2 months, i screwed an atty on it one day and it started to auto fire (with the power off). I don't know it this could be a potential problem with the three, but I for one will never buy another product from pioneer 4 you. I bought a sig 100w plus as a replacement and I am loving it. The magnets for the batt cover are so much easier and the batt life is awesome as well. My current fave setup is the sig with a kanger subtank with the stock .5 ohm replaceable occ running 25 watts with crunch berry juice at 3mg. Simply awesome. I havent tried the atlantis yet but really find no reason to buy one, if this kanger keeps performing the way it does. Hope this helped! Vape on my friend!! christov11 1 Link to comment Share on other sites More sharing options...
ambitionzvaper Posted January 4, 2015 Share Posted January 4, 2015 So here are the cons of both boxes. Ipv3 this has a sensor that doesn't work,hex screws in door,the springs for battery are janky and the buttons are small and might hurt after a lot of uses (have the Cana mod) has no case for it and there is a delay when you fire. The segeli 150w only cons I could find was the fire button might auto Fire if your finger "slides" on it. The ohm reader might jump up n down but I think that's the 100w+ thats about it with the segeli I bought the ipv3 but I think I'm returning it for the segeli because of the magnetic doors alone!!! That's stupid not to have a magnetic door hello! Link to comment Share on other sites More sharing options...
christov11 Posted January 8, 2015 Author Share Posted January 8, 2015 well after having the sig for a while I absolutely love it. I dont have an issue with the ohms... as long as it fires i dont really care. especially since I have been building around 0.15 so itll move around but... im usually using 70 watts and the battery life is great. no problems with the 510. Only thing i have to do is change my build to get more ohms and therefore get more volts... might give me a better vape.. not sure, gotta tinker haha one of my magnets popped out this morning but i just glued it.. hopefully it holds haha used some crappy glue... if it pops back out im gonna get super glue Link to comment Share on other sites More sharing options...
jasonculp Posted January 8, 2015 Share Posted January 8, 2015 So here are the cons of both boxes. Ipv3 this has a sensor that doesn't work,hex screws in door,the springs for battery are janky and the buttons are small and might hurt after a lot of uses (have the Cana mod) has no case for it and there is a delay when you fire. The segeli 150w only cons I could find was the fire button might auto Fire if your finger "slides" on it. The ohm reader might jump up n down but I think that's the 100w+ thats about it with the segeli I bought the ipv3 but I think I'm returning it for the segeli because of the magnetic doors alone!!! That's stupid not to have a magnetic door hello! I totally agree with the hex screws, and lack of a magnets. Mine came with both hex and phillips screws. I did the 165 watt upgrade and the ohm meter is spot on to .01. (more accurate than my RBA tester) I took it to a buddy who checked it on his fluke, and a much more accurate 4 wire resistance tester used for instrumentation. The battery springs are terrible as they will tear up the covering on the batteries (if you aren't careful). Another problem I found is a nick in the positive wire leading to the battery. Overall I just don't care for it. It is too big for me, and totally un-necessary for the type vaping I am doing. I rarely drip any more, I don't use RTA's any more, and I very seldom go over 15 - 16 watts. It is fun to use though. My nephew came in on leave over the holidays and it was fun to watch him try to hit it maxed out with a .33 ohm dual coil setup on it...lol christov11 1 Link to comment Share on other sites More sharing options...
Oberon75 Posted January 11, 2015 Share Posted January 11, 2015 (edited) So here are the cons of both boxes. Ipv3 this has a sensor that doesn't work,hex screws in door,the springs for battery are janky and the buttons are small and might hurt after a lot of uses (have the Cana mod) has no case for it and there is a delay when you fire. The segeli 150w only cons I could find was the fire button might auto Fire if your finger "slides" on it. The ohm reader might jump up n down but I think that's the 100w+ thats about it with the segeli I bought the ipv3 but I think I'm returning it for the segeli because of the magnetic doors alone!!! That's stupid not to have a magnetic door hello!Keep in mind though that the YiHi SX 330 chip in the iPV 3 is more proven then the chip in the new 150w Sigelei which was built in house and I've heard has some quirks. The 100w Sigelei uses an SX chip just like iPV. You can also buy a magnet kit for the iPV 3 for rather cheap. Between the two, I would honestly go with the iPV. I have a 2S and love it. Also note that these iPV mods unlike the Sigelei are in fact water resistant. I would buy the iPV 3 if the iPV 4 wasn't right around the corner. It's only 100w before updates but packs a lot of features as well as a magnetic door. Edited January 11, 2015 by Oberon75 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now