T-Bone Posted November 25, 2014 Share Posted November 25, 2014 Just wondering what voltages you folks use for different types of juices, or if it matters. For me, it seems I get more flavor from bakery type juices when using 4.8 and spices taste better at about 3.3...or is it all in my head? Link to comment Share on other sites More sharing options...
jasonculp Posted November 25, 2014 Share Posted November 25, 2014 (edited) Just wondering what voltages you folks use for different types of juices, or if it matters. For me, it seems I get more flavor from bakery type juices when using 4.8 and spices taste better at about 3.3...or is it all in my head? I am sure you will get a lot of answers from the guys here, it is very common to use different voltages/wattages for different juices. I personally don't do this, but it is because I only use one flavor in tanks and a couple in drippers. I really don't like the flavors I drip in the tanks, and I can't stand to drip the flavor I put in my tanks. I do use different voltages/wattages for different tanks or coils. I use lower wattages on my dual coil attomizers and higher in my vertical coils. Edited November 25, 2014 by jasonculp T-Bone 1 Link to comment Share on other sites More sharing options...
Tam Posted November 25, 2014 Share Posted November 25, 2014 (edited) I've got the original Vision Spinners in 900 mAh and 1300 mAh, and also Vision Spinner II in 1600 mAh. While I've never used any of my Spinners at 4.8 volts (too hot and I get a burned taste, fries my coils faster too), I've found most of my fruit flavors prefer cooler temps (3.3 - 3.8v) and bakery flavors prefer the higher at 3.8 - 4.0v. I just start at the lowest setting for any new juice and vape. If it doesn't do it for me I turn it up. Vape. Lather rinse repeat until you get a slight burnt taste. Turn it down just a notch when the happens and you'll have found the sweet spot for that flavor. That's also why I prefer the 1.8 ohm coil -- it gives me the greatest amount of flexibility in how low or high I set my Spinners. Edited November 25, 2014 by Tam T-Bone 1 Link to comment Share on other sites More sharing options...
Mr Smith Posted November 25, 2014 Share Posted November 25, 2014 havent used mine in a long time, but I have a spinner II used to use it with my ET-S tanks and run at about 3.8v most of the time @ 1.8ohms. T-Bone 1 Link to comment Share on other sites More sharing options...
HDMontana Posted December 14, 2014 Share Posted December 14, 2014 3.8 volts with a 1.8 ohm coil and fruity flavors works for me. Link to comment Share on other sites More sharing options...
Tug Posted January 9, 2015 Share Posted January 9, 2015 I keep mine at 3.3 - 3.8 no matter what juice I'm vaping Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now