The big dripper?

[christov11]

http://vapingtech.net/collections/atomizers/products/the-big-dripper-atomizer-rdta-clone

Anyone heard of this or has tried it?

Im trying to wrap my head around how it works...

Could be something insane if it does what it should!

[fishguy1123]

Check out riptrippers youtube vid on it.

[Tam]

This could be epic...if it works like it says. The page said it's a clone. Does anyone know what the original is?

[christov11]

This could be epic...if it works like it says. The page said it's a clone. Does anyone know what the original is?

Im guessing when you press down on the drip tip it releases air and so lets juice seep down the mini hole on the bottome of what seems to be the stainless tank on top of the coils...I would be scared of flooding the coils but I guess once you get the hang of it...

Gonna check that video out when I get home (access to videos at work is... non existant!)

[iQuit]

There's also Pontus by EHpro. Same principle as big dripper but looks like a KT tank

[jasonculp]

All I can say is wow. I really like the looks of that!

Here is a link to the original: http://www.grandv...sub-ohm-innovations.html

I have too many things in front of it to buy right now, so even the clone is on the back burner.

The video is impressive: https://www.youtube.com/watch?v=11rSKTBLrdQ

[christov11]

Don't like the look but the concept is great! My 0.02$

[charles vapor]

this sounds similar to the 3D, just a bigger tank and instead of the tank being below the coils its above it. slight differences, but in my experience the more primitive the better. This seems to have too many working parts that could break.

[Compenstine]

[sparc]

drip and drive

[sparc]

I got my Big Dripper clone a few days ago. The quality and threading is nice so far. It came with two prebuilt coils at 1 ohm each and several o-rings, allen wrench, spare spring, and drip tip. The pump action is smooth and the side walls on deck is high making it more difficult to build.

It's a nice clone for $30 but doesn't support single coil air flow and only has one hole where the liquid comes out of. It's a few mm taller than a Kayfun

Edited October 1, 2014 by sparc

[charles vapor]

so is that a thumbs up or down?

[sparc]

For $30 . I hope the next version will add another hole so it will be able to drip over both coils.

[DragonGunner]

I've been eyeing the original on the grandvaporstaion website. I've looked at the clones but I think I will buy the original. I like the concept, plus it has great reviews. I almost bought the EHPRO Pontus a couple months ago but thankfully I did not as the reviews pretty much suck. If all goes well I will order the big dripper it today.

From what I understood Sparc, the liquid being pushed through the hole is supposed to just saturate the wicking material and was not meant to drip directly onto the coils per se. I could be wrong though. Either way it appears to be a kick *** rdta.

[sparc]

Enjoy your Big Dripper.

I've let a friend borrow mine after 3 days of ownership since it does not support single coil air flow. I prefer single coil builds. He says it drips nice and has no problems with it, the flavor is good but not better than his PlumeVeil.

Edited October 25, 2014 by sparc

[DragonGunner]

Well after tons of reading and watching reviews I decided to buy the clone. Like sparc's mine came with prebuilt coils around .9 ohms each. I cleaned, built and assembled it to give her a rip. Truth be told this is not a bad little vape, in fact I like it. For me filling it up with around 5ml was pretty easy. It produces tons of vapor and its nice and warm. So far I only had one minor leak from over filling the well. Great buy for around $25.