Seant0721 Posted August 20, 2014 Share Posted August 20, 2014 hi everybody my name is Sean and I just signed up to this new awesome Vapor Talk site! I have a few questions since I'm new. First how do you post new topics on certain threads everytime I try to it says I'm unable to start a new thread? Secondly I have the Itaste SVD and I'm curious how do I get more vapor out of this setup do I adjust the VM or the PM? Third what does the VM setting actually do, and what does the PM setting do? Any help with these questions would be a great help! I started with the beginner's Nic Station set up and just last week bumped up to the itaste svd which I'm loving! @hope_photography123 1 Link to comment Share on other sites More sharing options...
mcquinn Posted August 20, 2014 Share Posted August 20, 2014 welcome.You have to make a few posts in the areas you have access to ,I think it is five and then they cut you loose if you don't do anything against the rules. The V button I would assume would increase the voltage and the P button increases the watts. Either one will heat things up and make more vapor . I don't mess with APV's so other than that I can't tell you much. Seant0721 1 Link to comment Share on other sites More sharing options...
Bebop Posted August 20, 2014 Share Posted August 20, 2014 You have to post 3 or 4 times in new mwmbers before you can make a post. After that you should be good to go. With the SVD you can either set the Voltage (voltage mode) or wattage (power mode). Starting out you will use voltage mode. Raise or lower the voltage according to your taste. Usually work it up until you start getting a burnt flavor then back it down until it's normal to find your spot. This setting will vary depending on the resistance of your coil. The power mode allows you to set the power or wattage and it will remain consistent between different tanks with different resistances but that's probably a bit beyond what you are starting out with so don't use it for now until you dial in your existing tank. You don't state what tanks you are using so I'm assuming you're still using the CE tanks that came with your kit Seant0721 1 Link to comment Share on other sites More sharing options...
Seant0721 Posted August 20, 2014 Author Share Posted August 20, 2014 Thanks guys that makes sense, im looking at other threads i have acces to now to post other questions! I am using the dual coil tanks that came with the kit! With the itaste svd what other add ons ie tanks batteries do y'all suggest I use with the make? Also was this let a good buy? I'm new to customizable vapor set up and just was looking on y'all opinion on my itaste svd? Thanks for y'all help and input :-) Link to comment Share on other sites More sharing options...
Seant0721 Posted August 20, 2014 Author Share Posted August 20, 2014 Also how do i maximize vapor out put? My tank is running 2.o amps and from what I've heard the itaste automatically adjust this by what tank you have? Is that true? @hope_photography123 1 Link to comment Share on other sites More sharing options...
fishguy1123 Posted August 20, 2014 Share Posted August 20, 2014 As Bebop mentioned, in wattage mode (power) the device will adjust to the resistance (Ohms rateing) of the coil in your tanks. That would by why they say ist auto adjusts. It's still not always perfect, but will probly be close. The higher you have it set for in either mode (Voltage or Wattage) the more vapor it can produce. Other things go into vapor production as well like the pg/vg ratio of the juice you use. More VG will give more vapor. All of the info for your device should be in the user manual. Please read that and check back if you have more questions. Welcome to VT. Seant0721 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 hi everybody my name is Sean and I just signed up to this new awesome Vapor Talk site! I have a few questions since I'm new. First how do you post new topics on certain threads everytime I try to it says I'm unable to start a new thread? Secondly I have the Itaste SVD and I'm curious how do I get more vapor out of this setup do I adjust the VM or the PM? Third what does the VM setting actually do, and what does the PM setting do? Any help with these questions would be a great help! I started with the beginner's Nic Station set up and just last week bumped up to the itaste svd which I'm loving! Welcome.. I'm glad you asked because I am wondering the same thing! New here and I can only reply ect... My profile is still incorrect.?! I'll have to get used to it though because this is a fantastic app and I love the forums! New vapor myself 3 month.. Rebuild my kanger Protank and nautilus aspire coils... Looking forward to all the information shared here! [emoji7] Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 Also how do i maximize vapor out put? My tank is running 2.o amps and from what I've heard the itaste automatically adjust this by what tank you have? Is that true? The tank is wat again seam? O ment what kind of tank? Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 The tank is wat again seam? O ment what kind of tank? Well the set up is the innokin itaste svd with the stock 2.1 oms tank that came with it! Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 Hi there I'm new here I've improved the vape on store bought tanks (disposable)... Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 Sorry it's the I clear 30 vwnv Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 Well the set up is the innokin itaste svd with the stock 2.1 oms tank that came with it! Are you feeling the draw is tight? Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 Yes its really nice much better then the nic station I was using! Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 Sorry it's the I clear 30 vwnv O probably would have drilled out the air hole in the bottom a bit on that one... It's much like the store bought haus tanks by mistic... There terrible until I opened the air intake.... O probably would have drilled out the air hole in the bottom a bit on that one... It's much like the store bought haus tanks by mistic... There terrible until I opened the air intake.... , Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 If you make about 5-6 post in the areas you can post it will open at topics up so you can post or reply anywhere :-) Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 I have a kanger Protank and nautilus aspire as well... But if I'm rebuilding or something else and using these I found opening up the air intake helps... Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 Ooo I see, my kit came with two I'll have to try that on one! I am looking at a new tank that has air adjustment on it! But that's a good idea @hope_photography123 1 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 I just noticed that too! Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 Ooo I see, my kit came with two I'll have to try that on one! I am looking at a new tank that has air adjustment on it! But that's a good idea Yes it works out for my family's evod tank too.. I used an etching tool! Link to comment Share on other sites More sharing options...
Seant0721 Posted August 22, 2014 Author Share Posted August 22, 2014 Okay and you just open the bottom hole more correct? Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 Yes it works out for my family's evod tank too.. I used an etching tool! Have you tried rebuilding the coils.. YouTube the tank and coil... There's a lot of information there.. Iclear.. You buy replacement coils? Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 I got a kanger Protank I rebuild the heads and use cotton.. Kanthol or nichrome wire and I get better vape flavors and save money Link to comment Share on other sites More sharing options...
@hope_photography123 Posted August 22, 2014 Share Posted August 22, 2014 So I have truly tried Alot of ways to get my equipment to vape ☁ preferably.. As you can well see! Link to comment Share on other sites More sharing options...
Jeffb Posted August 22, 2014 Share Posted August 22, 2014 You should refrigerate the salad dressing @hope_photography123 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now