RobRaven Posted August 17, 2014 Posted August 17, 2014 Efest IMR 18650 High Drain Flat top (2500mAh, 35A) or Efest IMR 18650 High Drain Flat top (3100mAh, 20A) to my SVD?
Bebop Posted August 17, 2014 Posted August 17, 2014 What are you topping it with? The only difference practically speaking is whether you are sub ohming or not.
Vaporsmith Posted August 17, 2014 Posted August 17, 2014 (edited) Since the SVD is regulated I would get the higher mah for longer battery life, 35 amps is irrelevant in a mod like the SVD. The lowest an SVD will fire is 1.3ohm coils. Edited August 17, 2014 by Vaporsmith
RobRaven Posted August 17, 2014 Author Posted August 17, 2014 Ok then i order 2 Efest IMR18650 High Drain Flat top (3100mAh, 20A) then with a sideorder of Nautilus and nautilus mini Vaporsmith 1
RobRaven Posted August 17, 2014 Author Posted August 17, 2014 And a few bottles Mtbaker juice too need to try Hawk juice! Mtdobies 1
RobRaven Posted August 18, 2014 Author Posted August 18, 2014 Now im getting nervous reading on another forum bout loads of ppl having problems with their SVD's!
Vaporsmith Posted August 18, 2014 Posted August 18, 2014 Mine still works, had it for years. Don't trust it as an ohm reader though.
RobRaven Posted August 18, 2014 Author Posted August 18, 2014 good to know and im glad im ordered a spinner 2 as a walk about dev too maybe next paycheck i'll get a mvp too!
Love2VapeDaily Posted August 20, 2014 Posted August 20, 2014 Since the SVD is regulated I would get the higher mah for longer battery life, 35 amps is irrelevant in a mod like the SVD. The lowest an SVD will fire is 1.3ohm coils. Not true. Mine would fire .8ohm
Love2VapeDaily Posted August 20, 2014 Posted August 20, 2014 The book that came with my innokin svd said it would not fire below 1.2ohm but I ran a octopus on it with a .8ohm build and it functioned just fine.The book that came with my innokin svd said it would not fire below 1.2ohm but I ran a octopus on it with a .8ohm build and it functioned just fine.
Vaporsmith Posted August 20, 2014 Posted August 20, 2014 I was never able to fire below 1.3. I wouldn't try to either way because of the risk of frying the chip.
fishguy1123 Posted August 20, 2014 Posted August 20, 2014 ^^^^This, sometimes just cause you can doesn't meen you should. Best to try to stay in line with what the device is speced for IMO. Vaporsmith, Compenstine and christov11 3
GA_Boy Posted August 21, 2014 Posted August 21, 2014 I love my SVD/Nautilus set up. I would go for the longer life bat. Spinner 2 is my alternate/backup. RobRaven 1
RobRaven Posted August 23, 2014 Author Posted August 23, 2014 Got both my Svd and my spinner 2 now ... and i gotto say night and day compaired to what i used before .... nice clouds and great taste even with hangsen ejuice!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now