xCOXINATORx Posted July 22, 2014 Posted July 22, 2014 Hey guys... I ordered my hana clone and a kayfun 3.1... anybody have any input on the kayfun... so I know what I'm looking forward to? Anything would be nice to hear.
Mtdobies Posted July 22, 2014 Posted July 22, 2014 I Dont have a kayfun I have a clone basically a Russian 91%, they're great for flavor, I will never ever go back to a tank. I switch out the cotton easily and clean the coil and its all new. Get yourself some wire, cotton and lots of juice. You'll love it I bet. Good choice congrats.
xCOXINATORx Posted July 22, 2014 Author Posted July 22, 2014 Only problem is I will be waiting a month or so for it to come in from fasttech... Its a kayfun clone also, I can't afford a real one... what type of mod or device do you use with the Russian?Any particular type of cotton I need? Or plain old cotton balls from the store?
xCOXINATORx Posted July 22, 2014 Author Posted July 22, 2014 I was wondering a good vendor to get juice... preferably a low price but not lacking quality.. also, what ratio of vg/pg should I use in this type of atty?
Mtdobies Posted July 22, 2014 Posted July 22, 2014 (edited) I can use a mech mod or my itaste vv/vw I plan on getting a spinner from our Vt store here soon. Sometime it takes a bit of playing w airflow and such wicking to get it where you like it but its not hard. Edited July 22, 2014 by Mtdobies
Mtdobies Posted July 22, 2014 Posted July 22, 2014 (edited) VG/pg is not any different then you would use it a regular tank. I actually like 30/70, anything.more is bleh. The flavor is so much better I Dont see the need to have higher pg but its a personal choice. Its a tank just rebuild able. Check out the V|T store they have some good juice, Mt Baker Vapor and Seattle vapor are excellent too. Edited July 22, 2014 by Mtdobies
Mr Smith Posted July 22, 2014 Posted July 22, 2014 kayfuns are great tanks I have a KayFun Lite Plus clone. I use mine on a vamo v5. means I can't make a sub ohm build, but that's fine with me. I do however prefer faster firing of my coils so with that said: I use 32g kanthal wire and make a single coil build with currently organic cotton. you can pick up a bag of organic cotton at wallgreens around the cosmetics section. I use a 5/64" drill bit to wrap around for the coil build, and I pre-torch the wire before I try to wrap it to make it easier to work with. IIRC I used 7.5 wraps to come up with a 1.6ohm coil. It may sound high for some of the RDA guys out there, but it fires ridiculously fast due to the small wire size, and it is compatible with all mods.
xCOXINATORx Posted July 22, 2014 Author Posted July 22, 2014 Nice.. I can't wait to start building when mine gets here.. I want to get a dripping atomizer as well for when I'm at home.. what kind of rda should I get? I'll have to get a clone of it too...
Mtdobies Posted July 22, 2014 Posted July 22, 2014 My preferred is the magma deep wells great taste w really nice.clouds.
Mtdobies Posted July 22, 2014 Posted July 22, 2014 @Mr Smith, was just.talking about the vamo 5 this am for my Russian. It does the trick?
Mr Smith Posted July 24, 2014 Posted July 24, 2014 yep. That's what I use for mine. The only catch is you need to build coils for 1.2ohm+ or it won't fire it. I noticed my chineseum vamo v5 clone won't even fire 1.2ohm but my non clone version of the v5 will fire a 1.2ohm coil. my current coil is 1.6ohm and both fire that one no problem. Mtdobies 1
Mtdobies Posted July 24, 2014 Posted July 24, 2014 I'm usually at 1.0-1.3 on mine, its not gonna happen then, drat. Back to the drawing board
LOSTSOUL VAPORZ Posted July 25, 2014 Posted July 25, 2014 Your going to love the kayfun! I'm getting ready to buy a second one so I can have 2 different flavors for vaping. I have a mechanical mod & prefer to vape at around .9 ohms.
LOSTSOUL VAPORZ Posted July 25, 2014 Posted July 25, 2014 Also make sure you clean the kayfun before using it or your going to vape on machining oil!!! Mr Smith 1
xCOXINATORx Posted July 25, 2014 Author Posted July 25, 2014 Haha. I'll be sure to clean it then... how do I do so?
LOSTSOUL VAPORZ Posted July 25, 2014 Posted July 25, 2014 I just used warm water & a little dish soap. I took it apart & clean each piece.
xCOXINATORx Posted July 25, 2014 Author Posted July 25, 2014 I can't wait for it to arrive... probably 3 weeks still though... ordered the kayfun, and a hana modz dna 30 clone about a week ago... I have an itaste mvp 3 at the moment. The hana is my first real "mod" and the kayfun is my first RBA... I'm very excited about the two of them... am looking forward to getting closer to being able to blow some "clouds" I might order a RDA while I'm waiting on my toys to come from China so I have that too... I'll use it when I'm lounging around the house, and the kayfun as my all day atty while I'm out and about... itd kill me having to drop some juice every couple times I hit my vape... idk.
Mr Smith Posted July 25, 2014 Posted July 25, 2014 I'm usually at 1.0-1.3 on mine, its not gonna happen then, drat. Back to the drawing board and you couldn't bring yourself to build a 32g 7.5 wrap 1.6ohm coil? lol you would be surprised at how frikken fast it fires and how much vape a single 1.6 coil on 32g can put off in a hurry... I can more than keep up with my buddies 28g sub ohm build... Mtdobies 1
Mr Smith Posted July 31, 2014 Posted July 31, 2014 NP just wrap it around a 2mm or 5/64" drillbit and should work out nicely. I just made myself a new 1.6 coil last night as my old one was getting a bit gunked up and very blackened lol.
Mtdobies Posted July 31, 2014 Posted July 31, 2014 Just heat and rinse. I did a 6 wrap 2.0ohm for.my Russian, Dont like it works well but not my favorite wire. Pain to wick and not have it move around. But in a high pg or 50/50 for me a high pg even a 1.5 had me coughing. But the Vape is too cool on high ohms so idk
Mr Smith Posted August 5, 2014 Posted August 5, 2014 helps having control over your voltage/wattage too... I run ~10w on my coil... as for cleaning...psssh I did enough heat and rinse with that coil. its been used a good month or better and I just felt like making a new one lol. Not like I'm going to run out of wire any time soon....that spool is gonna last forever!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now