Shadow Reaper Posted July 17, 2014 Posted July 17, 2014 Got a nemesis clone with a 28g 1 omh coil and it will not give me hardly any vapor, using a 3.7 18650 ncr battery (Panasonic), hits about like a pen style and way less than my itaste 134, what am I doing wrong?
hookahhighness Posted July 17, 2014 Posted July 17, 2014 pics would help id say it could a few things ya not much help but the more info you give the better someone could help, depends on they connection, what coil setup (single or dual) etc...
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 Single coil 28g 7 wraps, organic cotton for a wick, vapor production sucks badOk I guess that's 4 wraps lol
hookahhighness Posted July 17, 2014 Posted July 17, 2014 man you really need to tighten un those coils they should not be that far apart, was this a pre made coil or one you built if so plz for safety reasons do some research on coil building, rip trippers taught me well and look into battery safety as well.you want your coils to be side my side but not overlapping and that looks like a 5/4 wrap Mtdobies 1
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 I did it with tight coils also, same results
hookahhighness Posted July 17, 2014 Posted July 17, 2014 how long have you been building coils, and at 1 ohm with a single coil vapor should be decent, how much cotton are you using and hows the airflow on your atty, and this is all along with your coils being TIGHT
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 Yeah its a 5 4 wrap, as far as air flow I have a stock patriot with 2 1 mm holes
mvince201 Posted July 17, 2014 Posted July 17, 2014 (edited) It should look something like this. Edited July 17, 2014 by mvince201
hookahhighness Posted July 17, 2014 Posted July 17, 2014 mvince thanks man for stepping in ive had a lil too much kraken rum to feel safe saying ne thing was trying to find a video for him to watch
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 I have watched so many videos, done so much research and none of it produces, I have done the duels like in the pic and it was worse
mvince201 Posted July 17, 2014 Posted July 17, 2014 What battery are you using? Is it fully charged? You have an ohm meter I assume?
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 (edited) It's a 18650 full charge ncr, I have an ohm meter What ohm reading are u getting off ur build in that pic? Edited July 17, 2014 by Shadow Reaper
LOSTSOUL VAPORZ Posted July 17, 2014 Posted July 17, 2014 Does your nemesis clone have the adjustable contacts? Maybe the battery is not making good contact?
mvince201 Posted July 17, 2014 Posted July 17, 2014 I built that several months ago. I have no idea what it ohmed at. Lol
WillBlack Posted July 17, 2014 Posted July 17, 2014 I did it with tight coils also, same results Tight/touching coils are not needed. Here's one of Vape Happy's builds. He get's a bit of vapor out of it. You need to get an inline volt meter, MadVapes has a decent one. It will quickly tell you if you are getting the proper voltage, under load, from your device/coil. Mtdobies 1
Mr Smith Posted July 17, 2014 Posted July 17, 2014 (edited) maybe your just not letting your coil heat up enough, or it is taking your device too long to heat your coil up. You may be impatient like me and need to do what I call a rapid fire build.. use 32g wire and wrap it 5.5-7.5 times in a tight coil config making it 2mm in size (wrap around a 5/64" drill bit). then wrap your cotton around the coil since you use a dripper. make sure to position your coil and cotton close to the air intake to maximize vape flow. Edited July 17, 2014 by Mr Smith
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 Got it to work with a little of everyone's advice, thanks guys, it was taking to long to heat up the coils I built a dual coil that came out at .4 and love it, but not real comfortable with sub-ohm vaping just yet so I'm gonna build one to about .8 and see how that works
mvince201 Posted July 17, 2014 Posted July 17, 2014 Glad you figured it out! Just stick with what you like!
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 Glad you figured it out! Just stick with what you like! Man I really appreciate all your help and putting up with me last night lol[emoji106]
Shadow Reaper Posted July 17, 2014 Author Posted July 17, 2014 (edited) Just a update to all that helped me, wrapped a dual coil on a 1/8 drill bit, 7 to 8 wraps, gives me 7 ohms and good vapor, not clouds but good, bit the flavor is fantastic 28g wire is what I'm using Edited July 17, 2014 by Shadow Reaper
mvince201 Posted July 18, 2014 Posted July 18, 2014 I prefer a 3/32nd myself for the quicker ramp time. But I agree the 1/8 gives more flavor! It's all about personal preference!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now