Battery chargers

[chud]

I just got an ego twist and vision spinner 2. They did not come with chargers. Can I use my evod2 glass charger?

Also, one of the tanks I ordered isn't working. It's a KangerTech T3d, is this not compatable?

Edited July 1, 2014 by chud

[mvince201]

1. The ego twist will work just fine with the same evod charger, however I believe the spinner 2 requires a different charger, however I could be wrong.

2. If the tank screws onto the battery properly (which it should), and does not fire, then you have one of two problems: Either your battery is not making a connection with the tank, or the coil inside your tank is no good. First thing I would do is swap the coil and see if that solves the problem, if not you may need to try prying up the connection on your battery VERY gently. This will allow it to make a connection with your tank.

[chud]

Thanks... Ima dummy...there was a rubber thing on the coil I was supposed to remove. These batteries sure do hit good, and I finally got some good juice!

[mvince201]

Glad you got it fixed!

[Bebop]

The Spinner 2 uses a standard ego charger

[Patricia]

If you are talking about the rubber thing I have on my coils I never take it off???

[mvince201]

I think he is referring to the rubber cover that coils sometimes come in.