Jeffb Posted June 15, 2014 Share Posted June 15, 2014 http://www.maximumvapors.com/The-Beast_p_514.html All boxes will be built and shipped as they are finished! I can promise you that boxes are being assembled as fast as we can. Please watch our facebook page, "ModWizard" for any/all updates on this mod. Warning: If you haven't owned a mod before and are not a VERY experienced mod user, please don't buy this one. This device is only for advanced users. This box is designed for use with a dripper or Kayfun type device. Dripper recommended so that you can experience the true power. The Beast is a 200 watt badass box mod. It runs on two (2) 26650 batteries. The regulator is rated at 40 amps, so your safe build for full power is .125 ohms. There are options for the design, so please look over them at checkout. The connection is a 510 connection that uses a spacer that is built by us and is laser engraved. This mod is the first box I believe that is using this regulator with dual 26650, so this build is a first on the market. I will be changing a few things and adding a few things. Units shipped may vary slightly from that pictured (but only for the better). We are listening to your feedback and doing everything we can to make this your dream box. Options will need to be chosen during the selection process before adding to your cart. Warranty information: You will receive a letter of authenticity that will be numbered to match the serial number of your box. If you are not satisfied with the build quality you have, we offer a 7 days, no questions asked policy for return. All units come with a limited lifetime warranty on the box and everything, minus the raptor chip. The reason I don't warranty this part is you can build to low of a ohm coil and end up hurting the chip. If the raptor chip does go out it is 75.00 replacement charge. Additional warning: this box is very powerful and if your cotton/wicking material is not wet, it may catch fire. Please make sure your cotton/wicking material is sufficiently saturated is wet; only build above .125 ohms to avoid damage to your regulator; make sure and put your batteries in the correct way! Now for the specs Number of Outputs 1 Voltage - Input (Min) 5V Voltage - Input (Max) 13.8V Voltage - Output 1 0.6 ~ 5 V Voltage - Output 2 - Voltage - Output 3 - Current - Output (Max) 40A Power (Watts) - Manufacture Series 200W Voltage - Isolation - Features Remote On/Off, OCP, OTP, OVP, UVLO Mounting Type Through Hole Package / Case 15-SIP Module Size / Dimension 1.45" L x 0.42" W x 1.10" H (36.8mm x 10.7mm x 27.9mm) Operating Temperature 0°C ~ 70°C Efficiency 93.7% Power (Watts) - Max 200W olina 1 Link to comment Share on other sites More sharing options...
hookahhighness Posted June 15, 2014 Share Posted June 15, 2014 hhhmmmm thats just crazy Link to comment Share on other sites More sharing options...
kelli Posted June 15, 2014 Share Posted June 15, 2014 soooo....can i jump my car battery when it's dead with that thing? myrielleak and hookahhighness 2 Link to comment Share on other sites More sharing options...
NCHornet Posted December 28, 2014 Share Posted December 28, 2014 You'll poke your eye out with that thing, lol!!!! It is just amazing at how this hobby is changing so fast!! Link to comment Share on other sites More sharing options...
joejoevapekins Posted December 28, 2014 Share Posted December 28, 2014 And now there is two 260w mods out. The variant and the smy260 Link to comment Share on other sites More sharing options...
Tug Posted January 14, 2015 Share Posted January 14, 2015 Why do you even need more than a 100w? I don't get it lol Link to comment Share on other sites More sharing options...
Recommended Posts