what stuff do i need to make my own DIY juices?

[azizcansaythis]

hi all, ive been vaping about 5 weeks now 20PG and 80VG, nicotine free and i want to make my own juices. my main kind of juices are sweets and fruits hint of cool after taste only some of em, but i dont have any kind of specific of which kind though. the 2 sites i usually go buy juices are moon mountain vapor and mtbakervapor.

1. what stuff will i need in order to make juices?

2. what sites should i go to for DIY juices?

3. im thinking on buying aerotank airflow control, does it actually helps for airflow?

Edited June 9, 2014 by azizcansaythis

[Compenstine]

To get started you will want:

My go to for DIY Flavors and the rest of what is listed here is http://www.wizardlabs.us

Test your flavor mixes in small batches 5 to 10ml samples

Basic Must Haves:

1ml, 5ml,10ml blunt syringes at least 2 of each (Put scotch tape over the measuring markings or tey will ware off quickly)

30 ml Glass Dropper Bottles any color (I use Cobalt blue) (For holding small amounts of Bases PG, VG, Nic strengths)

Droppers for Flavor bottles (Out of Stock)(Wizard Labs sells them to fit the flavor bottles they sell) (I have some small dram bottles I use that came with dropper tops)

This is where I ordered my bottles from: http://www.specialty...assvialsmi.aspx

10ml, 25ml glass graduated cylinders (I prefer glass so it don't absorb flavors)

Glass Funnel

At least 1 50ml Beaker

1-2 Volumetric Flasks 50ml and 100ml

PG/VG Make sure it is food grade or medical grade not industrial grade. What they sell on Wizard labs will do to start with. http://www.bulkapothecary.com/

The more VG you have in your mix the weaker the flavor but more vapor. VG, If you have say 10/90 mix it will take a lot more flavoring to get it up to taste. I would not recommend doing high vg to start it can get costly for flavor. Trade off for less VG is less vapor production. Straight PG gives vapor but dissipates quick. don't less than a 90/10 mix.

Hope this helps get you started.

[azizcansaythis]

To get started you will want:

My go to for DIY Flavors and the rest of what is listed here is http://www.wizardlabs.us

Test your flavor mixes in small batches 5 to 10ml samples

Basic Must Haves:

1ml, 5ml,10ml blunt syringes at least 2 of each (Put scotch tape over the measuring markings or tey will ware off quickly)

30 ml Glass Dropper Bottles any color (I use Cobalt blue) (For holding small amounts of Bases PG, VG, Nic strengths)

Droppers for Flavor bottles (Out of Stock)(Wizard Labs sells them to fit the flavor bottles they sell) (I have some small dram bottles I use that came with dropper tops)

This is where I ordered my bottles from: http://www.specialty...assvialsmi.aspx

10ml, 25ml glass graduated cylinders (I prefer glass so it don't absorb flavors)

Glass Funnel

At least 1 50ml Beaker

1-2 Volumetric Flasks 50ml and 100ml

PG/VG Make sure it is food grade or medical grade not industrial grade. What they sell on Wizard labs will do to start with. http://www.bulkapothecary.com/

The more VG you have in your mix the weaker the flavor but more vapor. VG, If you have say 10/90 mix it will take a lot more flavoring to get it up to taste. I would not recommend doing high vg to start it can get costly for flavor. Trade off for less VG is less vapor production. Straight PG gives vapor but dissipates quick. don't less than a 90/10 mix.

Hope this helps get you started.

i dont know the term for this, but how do people drip their juices few drops on their atty?

(taste test before adding 3/4 juice in their tank.)

[Compenstine]

I build my own coils. I have a RDA set up with a single coil. I will drip a few drops and test the flavor. If it is not right I will rewick it adjust the mix and do it again. Then when it is how I like it, I will fill a tank to test over time.